1 |
홍명웅, '사출성형기술 I ,' 기전연구사, pp. 32-33, 241, 1999
|
2 |
이국웅,'플라스틱기술,' 성안당, pp. 155, 175, 284, 1999
|
3 |
이성출, '플라스틱 사출성형 조건 CONTROL볍,' 기전연구사, pp. 76, 2001
|
4 |
C. Liu, et al, 'Process studies in precision injection molding-1: process parameters and precison,' Polymer Engineering and Science, Vol. 36, No. 1, pp. 1-9, 1996
DOI
|
5 |
M. Saeki, et al, 'Experimental investigation of surface roughness in ultra-precision cutting of plastics,' JSPE, Vol. 67, No. 2, pp. 311-315, 2001
|
6 |
H. Eberle, 'Micro-injection mould technology, kunstsoff plast europe,' pp. 1344-1346, 1998
|
7 |
T. H. Gwon, et al, 'Moldflow design guide - a resource for plastics engineers,' Bunundang Press, 2002
|
8 |
W. S. Tsou, 'C-mold design guide - injection mold,' wunjing press, 1999
|
9 |
H. Hamada, et al, 'The V-notch at weld lines in polystyrene injection moldings,' Polymer Engineering and Science, Vol. 30, No. 15, pp. 931-936, 1990
DOI
|
10 |
A. K., Obrien-soucy, et al, 'Development of weld line strength in injection-molded polymethyle methacrylate,' J. of injection molding technology, Vol. 4, No. 3, pp. 152-158, 2000
|
11 |
Y. G. Son, et al, 'Weldline morphology of injection molded modified poly(phenylene-oxide)/ polymide-6 blends,' Polymer Engineering and Science, Vol. 41, No. 3, pp. 554-565, 2001
DOI
ScienceOn
|
12 |
Qin zou, et al, 'Optimization of injection design part1: gate location optimization,' Polymer Engineering and Science, Vol. 30, No. 15, pp. 873- 882, 1990
DOI
|
13 |
H. Hamada, et al, 'Effects of weldline on strength of fiber reinforced thermoplastics injection molding,' Kobunshi Ronbunshu, Vol. 44, No. 9, pp. 649-656, 1987
DOI
|
14 |
조용무, '사출성형이론,' 일진사, pp. 175, 210, 2001
|
15 |
C. H., Kua, 'On the residual stress of thin-wall injection molded products,' 6th FADMA conference, No. 77, 2001
|
16 |
C. W., Lee, et al, 'A knowledge-based CAD system for deliver design in injection molding,' KSPE, spring conference, pp. 723-726, 2001
|
17 |
C. W., Lee, et al, 'Intelligent design system for gate and runner in injection molding,' KSPE, Vol. 18, No. 9, pp. 192-203, 2001
과학기술학회마을
|
18 |
S. J., Lin, et al, 'Optimizing the weldline strength of injection molded liquid crystal poymers,' 6th FADMA conference, No. 96, 2001
|
19 |
K. W. Cho, et al, 'Evaluation of the weldline strength of thermoplastics by compact tension test,' Polymer Engineering and Science, Vol. 37, No. 7, pp. 1217-1225, 1997
DOI
ScienceOn
|