• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.05a
• /
• pp.339-342
• /
• 2008

The PSP(Pressure Sensitive Paint) is a technique to measure continuous pressure distribution on medel surface by oxygen quenching. The objective of this study is to apply PSP which is measured pressure for analyzing that air-fuel mixing characteristics in SCRamjet combustor. Experimentation is performed at freestream Mach number of 2.5 and used fuel jet injection. The result shows that growing air-fuel mixed proportions by increasing in cavity size. Also, PSP results compared with conventional pressure tap and CFD. They are coincided with qualitative and the inclination.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.4
• /
• pp.1-10
• /
• 2006

Separation motion analysis of staging system is conducted using combined analysis programs, which include unsteady aerodynamic analysis codes and dynamic motion analysis tools. In this study, the analysis is for the long-rang missile staging system. The purpose of this study is to verify the safety and reliance of the proposed staging system, and to find out the influence of angle of attack perturbation on staging. A structured parallel overset mesh called Chimera grid is used for the simulation of unsteady supersonic Euler flow solver. In addition, unsteady dynamic simulations are also performed.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.19 no.9
• /
• pp.662-668
• /
• 2007

In this study, jet fans are installed with 4 cases in the straight long tunnel; inlet-side setup, middle-side setup, outlet-side setup, and dispersion setup. A bus is selected as fired car, of which fire size is 20MW. And fired car locates at 100m, 700m, 1500m position from tunnel inlet, respectively. FLUENT, commercial finite-volume code, is used to analyze the performance. The velocity profile, $CO_2$ concentration, temperature distribution are examined for analysis. Performance of smoke control is compared by the backlayering length. Consequently, inlet-side setup of jet fans is a little more efficient than other cases considering the fire occurrence frequency in tunnel.

• Tunnel and Underground Space
• /
• v.12 no.2
• /
• pp.92-98
• /
• 2002

In this study reduced-scale experiments were conducted to analyze smoke movement in tunnel fire with jet fan, The 1/20 scale experiments were carried out under the froude scaling using gasoline pool fire range from 6.6 to 12.5 cm in diameter with total heat release rate from 0.714 to 4.77 kW. In the case of fires under the 2.5kW, backlaying was reduced about 40cm and smoke was effectively controled in downstream of the fan when operating the fan. The smoke layer was moved down and the ceiling temperature was decreased compared to that of without fan case in upstream of the fan, but the temperature in the lower part of the tunnel was increased.

• Journal of the Korean Society for Geothermal and Hydrothermal Energy
• /
• v.15 no.3
• /
• pp.7-13
• /
• 2019

To improve the flow distribution at channel locations in the welded plate heat exchanger with "L"-type inflow, the flow visualization of Model 1 was carried out. Besides, the characteristics of flow distribution was investigated experimentally according to the header shape. The inlet flow rate for each channel location was increased at the side channels but decreased at the central channels. In the case of Model 2, which has a slant structure added to the basic header of Model 1, the unevenness of inlet flow increased by 23% from 0.019 to 0.023 as compared to Model 1. On the other hand, Model 3, which has a baffle structure added to Model 2, showed 0.064 unevenness in inlet flow, which was a 36% reduction one compared to Model 1. To improve the distribution at each channel in the welded plate heat exchanger with "L"-type flow, it is necessary to improve the header external shape for the guide of flow as well as the baffle structure for reduction of vortex flow.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.65-65
• /
• 2021

보를 월류하는 흐름에 대하여 하류 수심이 보의 높이보다 낮고, 보 월류 후 수심의 공액수심보다 작거나 크고 같은 경우를 각각 자유도수와 수중도수라고 한다. 수중도수가 발생하는 경우 하류 수심이 보의 경사면을 따라 흐르는 하강류를 덮게 되며 유속을 감쇄시키기 때문에 최대 유속은 자유도수에 비해 매우 작게 발생한다. 그러나 수중도수는 자유도수에 비해 에너지 감쇄 효율이 낮기 때문에 도수구간의 거리가 증가하게 된다. 따라서 인명피해를 발생시키는 도수구간 재순환영역의 길이를 검토하는 것이나 보 하류 바닥보호공 길이 설계를 위해 수중도수에서의 흐름에 대하여 검토하는 것은 중요하다. 본 연구에서는 k-ω SST 난류모형을 이용하여 보 월류 후 발생하는 수중도수를 수치모의하고 평균흐름과 난류량의 종방향 변화에 대하여 검토하였다. 기존 실험수로에 k-ω SST 난류모형을 사용하여 모형의 적용성을 검토하였다. 다양한 하류 수심을 설정하여 평균흐름과 난류량에 대한 침수도의 영향 및 자유도수 계산결과와 벽면 제트 결과를 함께 비교하였다. 검토 결과 수중도수는 평균흐름과 난류량의 변화율이 자유도수보다 작고 벽면 제트보다는 큰 것을 확인하였다. 또한 침수도가 증가되면서 평균흐름과 난류량의 변화율이 작아지는 것을 확인하였다. 이것은 침수도의 변화에 따른 역압력경사의 차이에 의한 것으로 판단된다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.3
• /
• pp.275-282
• /
• 2010

The effect of swirl flow on NOx in a nonpremixed turbulent hydrogen jet with coaxial air was studied. The swirl vane angle was varied from $30^{\circ}$ to $90^{\circ}$. The fuel jet air velocity and coaxial air velocity were varied in an attached flame region as $u_F=85{\sim}160m/s$ and $u_A=7{\sim}14m/s$. The objective of the current study was to analyze the characteristics of nitrous oxide emission in a swirl flow and to propose a new parameter for EINOx scaling. The experimental results show that EINOx decreases with the swirl vane angle and increased with flame length. Further, EINOx scaling factors can be determined by considering the effective diameter ($d_{F,eff}$) in a far field concept. The EINOx increased in proportion to the flame residence time (${\sim}{\tau_R}^{1/2.8}$) and the global strain rate (${\sim}{S_G}^{1/2.8}$).

• Tunnel and Underground Space
• /
• v.16 no.6 s.65
• /
• pp.526-535
• /
• 2006

An experimental study was carried out on a reduced scale tunnel model to grasp the behavioral feature of fire-induced smoke in the long tunnels. Based on Froude modeling, the 1/50 scaled tunnel model (20 m long) was constructed by acrylic tubes and paraffin gas was released inside the tunnel to simulate the 20 MW fire-induced smoke. me test results show, that after approximately 2 minutes of fire generation, was descended from the tunnel ceiling through the decrease of buoyancy, then it was symmetrically propagated about 90 meters for 4 minutes before jet fans were operated. The smoke was effectively controlled when the jet fans were operated and an air stream velocity was getting closed to reach a critical velocity (the minimum air velocity that requires to suppress the smoke spreading against the longitudinal ventilation flow during the tunnel fire situations). It was also found out that a range of smoke was spreaded about 3 meters from the origin of fire but the range was not propagated to the escape direction anymore. The early stage of the In operation, however, showed that the smoke was hardly controlled. It means that the operation of emergency ventilation system has many dangerous factors such as an intercepting breathing zone.

• 한국연소학회:학술대회논문집
• /
• 2004.11a
• /
• pp.70-75
• /
• 2004

The effect of electric fields on the stability of non-premixed laminar lifted flame in coflow jets has been investigated by applying high voltage alternative current (AC) to the nozzle of propane fuel. The stable lifted flame which exist in far field of jets, the liftoff height was not effected by applied voltage. This implies that the cold jet between the nozzle and flame base can be analyzed with the previous cold jet theory. Flame liftoff and reattachment velocities were also measured as function of applied voltage and frequency. The fuel jet velocity at flame liftoff and reattachment increased with increasing voltage, implying that the range of flame srability can be extended with the AC charging. However the liftoff velocity increased with frequency of AC charging on nozzle, whereas the reattachment velocity decreases with frequency. The liftoff and reattachment velocities were correlated linearly with voltage considering the effects of frequency.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.4
• /
• pp.73-79
• /
• 2004

An experimental and computational study has been performed for investigation of the jet interaction in supersonic flow with a ramp located behind a sonic, lateral jet. The experimental techniques include schlieren, pressure taps, and Pressure Sensitive Paint. The numerical solver used in this study is AeroSoft's structured flow solver GASP Version 4.0. A Mach 4 crossflow with a pressure ratio of 532, and the 3D ramp was designed by parametric study using GASP. The results showed that the ramp located downstream of the jet decrese the nose-down pitching moment by 70% without a force loss.