• Korean Journal of Food Science and Technology
• /
• v.34 no.3
• /
• pp.449-453
• /
• 2002

This was studied to evaluate the quality characteristics of the bread added chitosan during storage at room temperature(Temp. $27^{\circ}C{\pm}2$, RH $75%{\pm}10$). The volume of the dough was increased depending on the larger molecular weight and the higer concentration of chitosan but was decreased at 0.50% of 120 kDa chitosan. The water activity was low depending on the larger molecular weight and the higher concentration of chitosan at the early storage, but maintained constantly during storage totally. The colors of the bread was hardly affected by 30 kDa of chitosan. Textural characteristics was improved at 30 kDa and 120 kDa of chitosan. Especially, the change of the hardness were maintained lower at 30 kDa, 120 kDa of chitosan during storage than that of standard. These results showed that the quality of the bread by added 30 kDa of chitosan was improved highly.

• Korean Journal of Dental Materials
• /
• v.44 no.2
• /
• pp.151-161
• /
• 2017

The purpose of this study was to examine the effect of shade and thickness of resin-nanoceramic CAD-CAM block (RNB) on the microhardness of dual-cured resin cement, as well as to measure the number of photons transmitted through RNBs of different thicknesses and colors. One dual-cured resin cement was used to prepare resin cement specimens. Resin cement specimens were light-cured for 40 seconds through 3 shades (A1, A2, A3 in HT (high translucency) and LT (low translucency) respectively) and four thicknesses (1, 2, 3, 4 mm) of RNB specimens. Vickers microhardness measurements of resin cement specimens were performed using a Vickers hardness tester. The light transmission of RNB specimens was measured using a spectrometer (SpectroPro-500, Acton Research, Acton, MA, U.S.A.), and the translucency parameter was calculated using the CIEL*a*b* system. Data were statistically analyzed by ANOVA and Tukey's test. There was a significant decrease of microhardness of resin cement specimen with an overlay of 4 mm of RNB thickness and A3 shade in comparison to A1 and 1 mm, respectively (p<0.05). The translucency parameter values and light transmission of RNBs tested differed significantly, according to the thicknesses of the specimen (p<0.05). Light transmission is decreased with increase in the thicknesses of RNBs. Shade A1 transmitted more light than darker blocks. A decrease in microhardness of resin cement specimens was observed with increasing thickness and shade (A1 to A3) of RNBs.

• KEPCO Journal on Electric Power and Energy
• /
• v.5 no.3
• /
• pp.209-213
• /
• 2019

Recently, demand for high energy density and long cycling stability of energy storage system has increased for application using with frequency regulation (F/R) in power grid. Supercapacitor have long lifetime and high charge and discharge rate, it is very adaptable to apply a frequency regulation in power grid. Supercapacitor can complement batteries to reduce the size and installation of batteries. Because their utilization in a system can potentially eliminate the need for short-term frequent replacement as required by batteries, hence, saving the resources invested in the upkeep of the whole system or extension of lifecycle of batteries in the long run of power grid. However, low energy density in supercapacitor is critical weakness to utilization for huge energy storage system of power grid. So, it is still far from being able to replace batteries and struggle in meeting the demand for a high energy density. But, today, LIC (Lithium Ion Capacitor) considered as an attractive structure to improve energy density much more than EDLC (Electric double layer capacitor) because LIC has high voltage range up to 3.8 V. But, many aspects of the electrochemical performance of LIC still need to be examined closely in order to apply for commercial use. In this study, in order to improve the capacitance of LIC related with energy density, we designed new method of pre-doping in anode electrode. The electrode in cathode were fabricated in dry room which has a relative humidity under 0.1% and constant electrode thickness over $100{\mu}m$ was manufactured for stable mechanical strength and anode doping. To minimize of contact resistance, fabricated electrode was conducted hot compression process from room temperature to $65^{\circ}C$. We designed various pre-doping method for LIC structure and analyzing the doping mechanism issues. Finally, we suggest new pre-doping method to improve the capacitance and electrochemical stability for LIC.

• Food Science and Preservation
• /
• v.18 no.6
• /
• pp.980-985
• /
• 2011

This study was conducted to determine the acetic-acid fermentation properties of apple juice (initial alcohol content, apple juice concentration, acetic-acid content, and inoculum size) in flask scale. At the acetic-acid fermentation of apple juice with 3, 5, 7, and 9% initial alcohol content, the maximum acidity after 10-day fermentation was 5.88% when the initial alcohol content was 5%. The acetic-acid fermentation did not proceed normally when the initial alcohol content was 9%. When the initial Brix was $1^{\circ}$, the acidity gradually increased, and the acidity after 12-day acetic-acid fermentation was 4.48%. Above 4% acidity was attained faster when the apple juice concentration was 5 and 10 $^{\circ}Brix$ than when it was 1 and 14 $^{\circ}Brix$. When the initial acidity was 1% or above (0.3, 0.5, 1.0, and 2.0%), the acetic-acid fermentation proceeded normally. The acetic-acid fermentation also proceeded normally when the inoculum sizes were 10 and 15%, and the acidity after eight-day acetic-acid fermentation was 5.60 and 6.05%, respectively. Therefore, the following were considered the optimal acetic-acid fermentation conditions for apple cider vinegar: 5% initial alcohol content, 5 $^{\circ}Brix$ or above apple juice concentration, 1.0% or above initial acidity, and 10% or above inoculum size. Apple cider vinegar with above 5% acidity can be produced within 48 h under the following acetic-acid fermentation conditions: 7% initial alcohol content, about 1% initial acidity, and 10% inoculum volume at $30^{\circ}C$, 30 rpm, and 1.0 vvm, using 14 $^{\circ}Brix$ apple juice in a mini-jar fermentor as a pre-step for industrial-scale adaptation.

• Food Science and Preservation
• /
• v.25 no.1
• /
• pp.79-89
• /
• 2018

In this study, the anti-oxidant, whitening, and anti-wrinkle effects of Castanea crenata inner shell extracts processed by enzyme treatment and pressurized extraction were investigated. The Castanea crenata inner shell was first hydrolyzed using celluclast, viscozyme, or hemicellulase. Then, it was subjected to pressure extraction for different durations (30, 60, and 120 min). The yields of the Castanea crenata inner shell extracts processed by different enzyme treatments followed by pressurized extraction for different times are in the range of 12.42-29.80%. The total polyphenol, flavonoid, and tannin contents of the C30m (celluclast enzyme and autoclave extracts at 30 min) extract were 15.48, 10.82, and 15.82 g/100 g, respectively. The total sugar content of the H120m(hemicellulase enzyme and autoclave extracts at 120 min) extract is 61.07 g/100 g. The 1,1-diphenyl-2-pycrylhydrazyl (DPPH) and 2,2'-azino-bis (3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) radical scavenging activities of the C30m extract at $1,000{\mu}g/mL$ are 89.20, and 81.96%, respectively. The superoxide radical scavenging and ferric-reducing antioxidant power of the C30m extract at $1,000{\mu}g/mL$ are 67.63% and $1,324.79{\mu}M$, respectively. Further, the tyrosinase and elastase inhibition activity of the C30m extract at $1,000{\mu}g/mL$ are 61.32, and 61.06%, respectively. Our results indicate that the Castanea crenata inner shell extracts processed by enzyme treatment followed by pressurized extraction could have beneficial effects on facial skin and they should be considered for use in new functional cosmetics.

• Food Science and Preservation
• /
• v.25 no.1
• /
• pp.7-18
• /
• 2018

In this study, soy-powder yogurt (SPY) with enhanced levels of ${\gamma}$-aminobutyric acid (GABA) and isoflavone aglycone was produced from sprouting high-protein soybeans (HPSs). The fermented steam-HPS sprouts (0 to 4 cm) were fermented (72 h) with Lactobacillus brevis, and the total free amino acids (FAAs) of the formed mixtures were determined to be 79.53, 489.93, 877.55, 780.53, and 979.97 mg/100 mL in the fermented HPS (FHPS), and the fermented steam-HPS with 0 cm (FSHPS-0), 1 cm (FSHPS-1), 2 cm (FSHPS-2), and 4 cm sprouting lengths (FSHPS-4), respectively. The levels of glutamic acid (GA) and GABA were observed to be the highest, 100.31 and 101.60 mg/100 mL, respectively, in the unfermented HPS (UFSHPS-1, 1 cm) and FSHPS-1 sprouts, respectively. Moreover, the total contents of the isoflavone glycoside form decreased proportionally to the increasing total levels of isoflavone aglycones after fermentation in FSHPS-0, FSHPS-1, FSHPS-2, and FSHPS-4. The levels of isoflavone aglycones were detected as 350.34, 289.15, 361.61, 445.05, and $491.25{\mu}g/g$ in FHPS, FSHPS-0, FSHPS-1, FSHPS-2, and FSHPS-4, respectively. While FSHPS-1 exhibited the highest DPPH (63.28%) and ABTS (73.28%) radical scavenging activities, FSHPS-4 contained the highest isoflavone aglycone ratio (81.63%). All in all, the FSHPS-1 mixture prepared in this study exhibited high GABA content and functional prosperity, thereby making it suitable for potential applications in the soy-dairy industry.

• Korean Journal of Heritage: History & Science
• /
• v.54 no.4
• /
• pp.22-35
• /
• 2021

Recently, as the climate changes rapidly and the prevalence of airborne fine particulate matter increases, the pattern of pollutants in the atmospheric environment is also changing. Therefore, the importance of studying the stability of pigments used in colored cultural properties is emerging. Hoecheong is an inorganic blue glass pigment called smalt; it is made by using cobalt as a coloring element in potash glass, and was widely used in colored cultural assets, such as murals and paintings. In this study, we collected three other hoecheong pigments to analyze their properties. The percentage of Co and K contained are different according to the manufacturer, and the smalt-3 sample has a lower cobalt content (15.1 wt.%) and higher potassium content (29.6 wt.%). After this analysis, colored specimens were prepared. Prepared specimens were exposed to ultra-violet rays, CO₂/NO₂, and NaCl, which are known to have the greatest influence on the stability of pigments. We found that factors affecting the color stability were NO₂ gas, ultra-violet rays, and water-soluble salts (NaCl). Among them, NO₂ has the most severe impact on color change of the pigments. Results of the component analysis showed that the color change depends on the potassium and cobalt content of the hoecheong pigment. Among the specimens, smalt-3 showed the most vulnerability after exposure to NO₂ gas and water-soluble salts. Pigment film stability is affected by watersoluble salts, giving rise not only to color change, but also weakening the physical properties of the film. However, there was no significant change in composition and color after exposure to CO₂ gas. In conclusion, we found that hoecheong pigments underwent color change and increased instability of the coating film when exposed to any of the atmospheric environmental factors used in this study, except for CO₂.

• Clean Technology
• /
• v.25 no.1
• /
• pp.91-97
• /
• 2019

Oxidative desulfurization (ODS) has received much attention in recent years because refractory sulfur compounds such as dibenzothiophenes can be oxidized selectively to their corresponding sulfoxides and sulfones, and these products can be removed by extraction and adsorption. In this work, The oxidative desulfurization of marine diesel fuel was performed in a batch reactor with hydrogen peroxide ($H_2O_2$) in the presence of various supported heteropoly acid catalysts. The catalysts were characterized by XRD, XRF, XPS and nitrogen adsorption isotherm techniques. Based on the sulfur removal efficiency of promising silica supported heteropoly acid catalysts, the ranking of catalytic activity was: $30\;H_3PW_{12}/SiO_2$ > $30\;H_3PMo_{12}/SiO_2$ > $30\;H_4SiW_{12}/SiO_2$, which appears to be related with their intrinsic acid strength. The $30\;H_3PW_{12}/SiO_2$ catalyst showed the highest initial sulfur removal efficiency of about 66% under reaction conditions of $30^{\circ}C$, $0.025g\;mL^{-1}$ (cat./oil), 1 h reaction time. However, through the recycle test of the $H_3PW_{12}/SiO_2$ catalyst, significant deactivation was observed, which was attributed to the elution of the active component $H_3PW_{12}$. By introducing cesium cation ($Cs^+$) into the $H_3PW_{12}/SiO_2$ catalyst, the stability of the catalyst was improved with changing the solubility, and the $Cs^+$ ion exchanged catalyst could be recycled for at least five times without severe elution.

• Journal of Plant Biotechnology
• /
• v.45 no.4
• /
• pp.400-408
• /
• 2018

Biodiversity has continued to degrade in the $21^{st}$ century due to global warming occasioned by destruction of the environment around the world.. The Nagoya protocol places Korea in a unique position to effectively develop and protect its domestic genetic resources. Microalgae under study in this research contains large amount of antioxidant substances such as beta carotene and astaxanthin, that can be used as biological resource owing to the large amounts of biomass that can be secured through photosynthesis. However, it is difficult to preserve it since cryopreservation method used for long-term preservation is yet to be developed. A basic study for long term cryopreservation was carried out on Nizschia frustulum and Nitzschia amabilis which belong to marine diatoms. As cryoprotectants (CPAs), glycerol, DMSO, and methanol which penetrate into cells were prepared at 5%, 10%, and 15% concentrations each, in case of methanol, it was tested at concentrations of 5%, 10% and 12% by its nature. Two kinds of microalgae, N. frustulum and N. amabilis, were diluted with $10^2$, $10^3$ and $10^4cells\;ml^{-1}$, respectively. The highest survival rate was shown at12% concentration of methanol, and the figures were $6.94{\pm}0.31%$ in N. frustulum and $8.85{\pm}0.16%$ in N. amabilis. As a result of 3 weeks cultivation of thawed microalgae after freezing, the result is shows that N. frustulum increased about 10 times faster and N. amabilis increased about 12 times the original concentration.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.45 no.2
• /
• pp.199-208
• /
• 2019

This study reports water-resistant oil-in-water (O/W) emulsion-based sunscreening formulations prepared using a poly(ethylene glycol)-poly(${\varepsilon}$-caprolactone)-poly(ethylene glycol) (PEG-PCL-PEG) triblock polymeric surfactant. As a result of a variety of outdoor recreational activities such as swimming and hiking, consumer needs for development of advanced water-resistant sunscreen formulations are increasing. Water-resistant sunscreens are mostly based on water-in-oil (W/O) emulsions, because they should not be wiped off by water or sweat. However, the W/O emulsion formulations have a disadvantage in that the feeling of use is oily and difficult to remove. On the other hand, the O/W emulsion formulations are excellent in achieving the better skin feel as well as the easier removal. However, it is difficult to provide the O/W emulsion formulations with the water-repelling performance, since re-emulsification likely occurs upon getting touch with water. To solve this problem, this study proposes a O/W emulsion-based sunscreen formulation, a triblock polymeric surfactant having relatively high interfacial tension HLB value (~ 10). This allows the sunscreen formulations to exhibit the improved water repellence function by preventing their re-emulsification. The sunscreen formation system prepared in this study would be useful for diversification of functional sunscreen products, taking advantages of its excellent emulsion stability, UV protection performance, long lasting water-resistant function and selective cleansing effect with only foam cleanser.