• Title/Summary/Keyword: 제조특성

Search Result 16,983, Processing Time 0.051 seconds

Extraction Characteristics of Saponin and Acidic Polysaccharide Based on the Red Ginseng Particle Size (홍삼의 입자크기에 따른 사포닌 및 산성다당체의 추출 특성)

  • Cho, Chang-Won;Kim, Sang-Wook;Rho, Jeong-Hae;Rhee, Young-Kyung;Kim, Kyung-Tack
    • Journal of Ginseng Research
    • /
    • v.32 no.3
    • /
    • pp.179-186
    • /
    • 2008
  • Effect of pulverization on total solid, crude saponin, and acidic polysaccharide contents of dried red ginseng main root were tested. Several particle size samples, including red ginseng main root (non pulverized), $10{\sim}40$ mesh powder, $40{\sim}100$ mesh powder, and >100 mesh powder were used in the extraction. The sequential solvent extraction method (1st: 70% EtOH at $70^{\circ}C$ for 12 hr, 2nd: 70% EtOH at $70^{\circ}C$ for 12 hr, 3rd: water at $70^{\circ}C$ for 12 hr) was applied to extract the saponins and acidic polysaccharide. Extraction yield of total solid of pulverized red ginseng ($10{\sim}40$ mesh size) was increased to 20% compared with that of non-pulverized. Especially, the crude saponin content of pulverized red ginseng ($10{\sim}40$ mesh size) showed an increase of 47% over non-pulverized. No difference in the component ratio was observed by pulverization, when the individual ginsenosides were quantified by HPLC. Also, extraction yield of acidic polysaccharide of pulverized red ginseng ($10{\sim}40$ mesh size) was increased 57% compared with that of non-pulverized. The results suggested that pulverization might be useful for increasing the extraction yield of red ginseng components.

Quality characteristics of fresh-cut Dioscorea bulbifera treated under various blanching conditions prior to vacuum-packaging during storage (블랜칭 처리에 의한 신선편이 둥근마의 저장 중 품질 특성)

  • Seong, Bong Jae;Kim, Sun Ick;Jee, Moo Geun;Kim, Soo Dong;Kwon, A Reum;Kim, Hyun Ho;Lee, Ka Soon
    • Food Science and Preservation
    • /
    • v.24 no.5
    • /
    • pp.565-575
    • /
    • 2017
  • This study was carried out to investigate shelf-life and quality of fresh-cut Dungkunma (Dioscorea bulbifera) in order to elevate utilization of Dungkunma a fresh food. Before vacuum-packaging (in polyethylene/polypropylene film ($100{\mu}m$, $15{\times}20cm$, $75{\pm}2cmHg$) and storaging at $2^{\circ}C$, Dungkunma was peeled out and cut to dice type ($2.0{\pm}0.5cm^3$), and then washed and blanched using hot water (at $90{\pm}2^{\circ}C$ with 2% NaCl solution for 30 sec). Blanched Dungkunma was pre-dried at room temperature, $40^{\circ}C$ and $50^{\circ}C$ for removing surface water. Each peeled dice Dungkunma was packed 50 g in polyethylene/polypropylene film ($100{\mu}m$, $15{\times}20cm$) with vacuum treatment ($75{\pm}2cmHg$) and stored at $2^{\circ}C$ for 90 days. Hardness and adhesiveness of Dungkunma blanched by 2% NaCl and pre-dried at $50^{\circ}C$ (SB50) were the highest, but changes were the least during storage. Lightness and yellowness of stored Dungkunma in all treatments decreased slightly while redness increased during storage. Changes of color of SB50 was the least. Total concentration of aerobic bacteria in SB50 was $1.88{\pm}0.18log\;CFU/g$ during 90 days and E. coli was detected in all treatments during whole storage periods. Dioscin and allantoin contents of SB50 were virtually unchanged during the storage. Consequently, the results of this study suggest that vacuum packaged Dungkunma after blanching using 2% NaCl solution could be effective to prolong the quality of fresh-cut Dungkunma.

Direct bonding of Si(100)/Si$_3$N$_4$∥Si (100) wafers using fast linear annealing method (선형열처리를 이용한 Si(100)/Si$_3$N$_4$∥Si (100) 기판쌍의 직접접합)

  • Lee, Young-Min;Song, Oh-Song;Lee, Sang-Hyun
    • Korean Journal of Materials Research
    • /
    • v.11 no.5
    • /
    • pp.427-430
    • /
    • 2001
  • We prepared 10cm-diameter Si(100)/500 $\AA$-Si$_3$N$_4$/Si(100) wafer Pairs adopting 500 $\AA$ -thick Si$_3$N$_4$layer as insulating layer between single crystal Si wafers. Si3N, is superior to conventional SiO$_2$ in insulating. We premated a p-type(100) Si wafer and 500 $\AA$ -thick LPCVD Si$_3$N$_4$∥Si (100) wafer in a class 100 clean room. The cremated wafers are separated in two groups. One group is treated to have hydrophobic surface and the other to have hydrophilic. We employed a FLA(fast linear annealing) bonder to enhance the bond strength of cremated wafers at the scan velocity of 0.1mm/sec with varying the heat input at the range of 400~1125W. We measured bonded area using a infrared camera and bonding strength by the razor blade crack opening method. We used high resolution transmission electron microscopy(HRTEM) to probe cross sectional view of bonded wafers. The bonded area of two groups was about 75%. The bonding strength of samples which have hydrophobic surface increased with heat input up to 1577mJ/$m^2$ However, bonding strength of samples which have hydrophilic surface was above 2000mJ/$m^2$regardless of heat input. The HRTEM results showed that the hydrophilic samples have about 25 $\AA$ -thick SiO layer between Si and Si$_3$N$_4$/Si and that maybe lead to increase of bonding strength.

  • PDF

Nutritional Properties, as Food Resources for Menu Development, of Cubed Snailfish, Shaggy Sea Raven, and Two Kinds of Wild Vegetables that are Staple Products in Samcheok (삼척지역 특산물인 곰치, 풍덕구이, 곰취, 곤드레의 향토식품 소재화를 위한 영양적 특성 연구)

  • Surh, Jeong-Hee;Kim, Jong-Ok;Kim, Mi-Hyun;Lee, Jae-Choel;Yang, Hee-Wan;Lee, Byung-Yong;Kim, Mi-Young;Yun, Sun-Ju;Jeong, Hye-Ryeon
    • Korean journal of food and cookery science
    • /
    • v.25 no.6
    • /
    • pp.690-702
    • /
    • 2009
  • Liparis tessellatus(cubed snailfish), Hemitripterus villosus(shaggy sea raven), Ligularia fischeri, and Cirsiu setidens, which are staple products in Samcheok, were studied as food resources for the development of a representative local menu. Thus, their nutritional compositions were analyzed, and the resulting values were used to assess the nutritional characteristics of the newly-developed menu. In Liparis tessellatus and Hemitripterus villosus, the organic components including protein and fat tended to be lower than the corresponding values referred to as the 'Seventh Revision Food Composition Table' (2006), which was presumably linked to the spawning period of the fish. The contents of Zn, Cu, and Mg, which are nutritionally important even though the consumption of these minerals by Koreans is not sufficient, were determined to 0.5, 0.2, and 34.3 mg/100 g for Ligularia fischeri, and 26.2, 1.1, and 147.7 mg/100 g for dried Cirsiu setidens. Cirsiu setidens cultivated in Samcheok contained noticeably higher amounts of calcium, zinc, and iron, and its calcium level was more than an order of magnitude higher than that provided by the Food Composition Table. This might be associated with the fact of that Samcheok is abundant in lime which consists of calcium-containing inorganic materials. n-3 fatty acids including docosahexaenoic acid(DHA) accounted for 21% and 13% of the total fatty acids, for Liparis tessellatus and Hemitripterus villosus, respectively, and the major amino acids were glutamic acid, aspartic acid, glycine, and alanine for both fish. One of the newly developed menus, Cirsiu setidens hae-jang-gook, was nutritionally superior to the corresponding menu that used dried radish leaves, a typical ingredient in hae-jang-gook, in terms of the protein, iron, and zinc contents. Rice pottage cooked with Liparis tessellatus instead of abalone was high in protein, calcium, iron and zinc, where one serving provided 29.1, 15.4, 31.0, and 27.8% of their Reference Intake (RI)s, respectively.

Hydrocarbon Gas Permeation Characteristics of PTMSP/LDH Composite Membranes (PTMSP/LDH 복합막의 탄화수소 기체투과 특성)

  • Jeong, Yeon-Eim;Lee, Hyun-Kyung
    • Membrane Journal
    • /
    • v.24 no.6
    • /
    • pp.423-430
    • /
    • 2014
  • PTMSP/LDH composite membranes were prepared by adding 0, 1, 3, and 5 wt% LDH contents to PTMSP. The gas permeability and selectivity for $H_2$, $N_2$, $CH_4$, $C_3H_8$, $n-C_4H_{10}$ were investigated as a function of LDH content. As LDH content of PTMSP/LDH composite membranes increased to 5 wt%, the gas permeability for $H_2$ and $N_2$ gradually decreased, while $n-C_4H_{10}$ permeability rapidly increased. The gas permeability for $CH_4$ and $C_3H_8$ was found to decrease for the membranes with LDH content range of 0~3 wt%, however increase in the range of 3~5 wt%. As LDH content of PTMSP/LDH composite membranes increased to 5 wt%, the selectivity of membranes gradually increased for $H_2$, $N_2$, $CH_4$, $C_3H_8$, $n-C_4H_{10}$ over $H_2$, $N_2$. However the selectivity for $C_3H_8$ and $n-C_4H_{10}$ over $CH_4$ increased in the range of LDH content 0~3 wt% but decreased in the range of 3~5 wt%. The $CH_4$ and $n-C_4H_{10}$ selectivity over $H_2$ and $N_2$ increased as $CH_4$ and $n-C_4H_{10}$ permeability increased. The $n-C_4H_{10}$ selectivity over $CH_4$ increased with increasing $n-C_4H_{10}$ permeability up to 182,000 barrer and decreased above 182,000 barrer of $n-C_4H_{10}$ permeability. The $C_3H_8$ selectivity over $H_2$ and $N_2$ was found to decrease as the $C_3H_8$ permeability increased from 46,000 to 50,000 barrer, but to increase with increasing permeability from 50,000 to 52,300 barrer and decrease again with increasing permeability from 52,300 to 60,000 barrer. The $C_3H_8$ selectivity over $CH_4$ was found to decrease with increasing $C_3H_8$ permeability up to 52,300 barrer but increase above 52,300 barrer.

Supercritical Water Oxidation of Anionic Exchange Resin (초임계수 산화를 이용한 음이온교환수지 분해)

  • Han, Joo-Hee;Han, Kee-Do;Do, Seung-Hoe;Kim, Kyeong-Sook;Son, Soon-Hwan
    • Journal of Korean Society of Environmental Engineers
    • /
    • v.28 no.5
    • /
    • pp.549-557
    • /
    • 2006
  • The characteristics of supercritical water oxidation have been studied to decompose the waste anionic exchange resins which were produced from a power plant. The waste resins from a power plant were mixture of anionic and cationic exchange resins. The waste anionic exchange resins had been separated from the waste resins using a solid-liquid fluidized bed. It was confirmed that the cationic exchange resins were not included in the separated anionic exchange resins by the elemental and thermogravimetric analysis. A slurry of anionic exchange resins which could be fed continuously to a supercritical water oxidation apparatus by a high pressure pump was prepared using a wet ball mill. Although the COD of liquid effluent had been reduced more than 99.9% at 25.0 MPa and $500^{\circ}C$ within 2 min, the total nitrogen content was reduced only 41%. The addition of nitric acid to the slurry could reduce the total nitrogen content in treated water. The central composite design as a statistical desist of experiments had been applied to optimize the conditions of decomposing anionic resin slurry by means of the COD and total nitrogen contents in treated waters as the key process output variables. The COD values of treated waters had been reduced sufficiently to $99.9{\sim}100%$ af the reaction conditions of $500{\sim}540^{\circ}C$, 25.0 MPa within 2 min. The effects of temperature and nitric acid concentration on COD were not significant. However, the effect of nitric acid concentration on the total nitrogen was found to be significant. The regression equation for the total nitrogen had been obtained with nitric acid concentration and the coefficient of determination($r^2$) was 95.8%.

Characterization of Chitin Deacetylase Produced from Mucor rouxii (Mucor rouxii가 생산한 Chitin deacetylase의 특성)

  • SOHN Heung-Sik;PARK Seong-Min;SON Byung-Yil;CHOI Hyeon-Mee;LEE Keun-Tai
    • Korean Journal of Fisheries and Aquatic Sciences
    • /
    • v.32 no.2
    • /
    • pp.121-126
    • /
    • 1999
  • In order to degrade chitin by enzymatic hydrolysis, it is required from screening highly active deacetylase. To this end, we examined three fungal strains and it turned out that Mucor rouxii produced highly active deacetylase, this enzyme exhibited the highest enzymatic activity against colloidal chitin. The conditions for growing Mucor rouxii are as follows; the effective carbon source, nitrogen source, adequate initial pH, temperature and incubation time were $2\%$ glucose, $1.33\%$ yeast extract, $0.66\%$ pepton, 4.5, $25{\pm}2^{\circ}C$ and 48hr, respectively. The optimum pH and temperature for purified enzyme activity were 5.5 and $40^{\circ}C$, respectively. The purified enzyme was stable at pH ranging from 4.5 to 5.5. However, the enzyme activity was decreased to less than $50\%$ at pH blow 45 and above 7.5. At temperatures above $50^{\circ}C$, the enzyme activity was decreased remarkably. The enzyme was inhibited by LiC1, $HgCl_2$, and $BaCl_2$, but stimulated by $CaCl_2$ and $ZnC1_2$, The activity of purified enzyme was increased by L-cysteine and 2-mercaptoethanol, while decreased by O-phenanthroline, p-CMB, EDTA, and iodoacetate. The $K_m$ and the $V_{max}$ value of purified enzyme were $1.2\%$ and 59.5 U/mg, respectively. The deacetylation activity of purified enzyme was not detected at optimal reaction condition when chitin particle suspension was used.

  • PDF

Study on the Intake Pattern of Health Intended Foods Depending on Inclusion of Proclaimed Health Functional Food Materials (건강기능식품에 의해 고시된 원료 포함여부에 따른 건강증진용 식품의 섭취양상 비교)

  • Park, You-Gyoung;Park, Mi-Young;Sung, Mi-Kyung;Kwon, Hoonjeong
    • Journal of the Korean Society of Food Science and Nutrition
    • /
    • v.34 no.3
    • /
    • pp.374-379
    • /
    • 2005
  • The intake of health foods with physiological effects may cause adverse effects due to their intrinsic compounds, external contamination or consumers' eating patterns. To keep pace with the increasing interest on the safety assurance, Health Functional Food Act has been enacted and standards and specifications for 32 products have been proclaimed by Korea Food and Drug Administration in 2004. To reduce the safety problems related with the intake of non regulated health intended food, we classified the health intended foods materials into two groups, as proclaimed health functional food materials and others, and examined the difference of intake patterns on both categories. Among 16,474 health intended foods responded by 5,175 respondents and their household members, 49.2% were categorized as health functional food materials. The average number of total health intended foods intake and health functional foods intake per person were 3.19 and 1.58 respectively. The proportion of health functional foods in total health intended foods per person was higher in the group with less than 20 years old, therefore this age group needs relatively low concern. On the other hand, 40-59 years old females who have taken the highest number of health food items, 30-59 years old males who had the lowest proportion of health functional foods to total health intended food, and their consumed foods such as medicinal plant and animal protein based restoratives need relatively high concern about intake safety of health foods.

Effects of Fermented Red Ginseng Supplementation on Blood Glucose and Insulin Resistance in Type 2 Diabetic Patients (발효홍삼이 제2형 당뇨병 환자의 혈당 및 인슐린저항성에 미치는 영향)

  • Kim, Hey-Ok;Park, Min-Jung;Han, Ji-Sook
    • Journal of the Korean Society of Food Science and Nutrition
    • /
    • v.40 no.5
    • /
    • pp.696-703
    • /
    • 2011
  • We performed a randomized placebo-controlled trial to determine whether or not fermented red ginseng supplementation modulates blood glucose and insulin resistance in type 2 diabetic patients. A total of 38 patients were randomized to either a fermented red ginseng group or placebo group. The patients in the experimental or placebo group consumed 780 mg of fermented red ginseng or cellulose supplement per day for 12 weeks, respectively. Lifestyle factors and dietary intakes of the patients were not altered during the 12-weeks period. In the fermented red ginseng group after 12 weeks, the fasting blood glucose levels were significantly decreased ($136.29{\pm}16.45$ mg/dL to $127.71{\pm}17.74$ mg/dL) and $HbA_1c$ was also decreased. Especially, high HbA1c (HbA1c $\geq$8%, $8.45{\pm}0.56%$ to $7.82{\pm}0.53%$) was significantly decreased compared to low HbA1c (HbA1c <8%, $6.71{\pm}0.85%$ to $6.44{\pm}0.49%$) in the fermented red ginseng group. Serum low-density lipoprotein was slightly decreased in the fermented red ginseng group compared to the placebo group. Homeostasis model assessment-insulin resistance was significantly reduced in the fermented red ginseng group compared to the placebo group. These results suggest that fermented red ginseng supplementation could be helpful to reduce blood glucose by improving insulin resistance in type 2 diabetic patients.

Fabrication and characteristics of porous ceramics from $ZrTiO_4$ based ceramic material (다공성 $ZrTiO_4$ 재료의 제조 및 특성)

  • Hur, Geun;Myoung, Seong-Jae;Lee, Yong-Hyun;Chun, Myoung-Pyo;Cho, Jeong-Ho;Kim, Byung-Ik;Shim, Kwang-Bo
    • Journal of the Korean Crystal Growth and Crystal Technology
    • /
    • v.18 no.1
    • /
    • pp.5-9
    • /
    • 2008
  • Cordierite has a very low thermal expansion coefficient, but has problem that it has a weak mechanical strength and is apt to be attacked by acid such as sulfur for using as a diesel particulate filter support. The physical properties of $ZrTiO_4$ modified with $SiO_2,\;Al_2O_3$, MoOx, $Cr_2O_3\;and\;Nb_2O_5$ were investigated with XRD, SEM, UTM and thermal expansion, etc. in this paper. $ZrTiO_4$ powder was synthesized as a monoclinic structure with processes that starting materials of $TiO_2\;and\;ZrO_2$ were mixed with ball mill and calcined above $1240^{\circ}C$ for 3 hr. Additive modified $ZrTiO_4$ specimens for flexural strength and thermal expansion measurement were obtained by mixing $ZrTiO_4$ powder with additives, pressing and firing at $1300^{\circ}C$ for 3 hr. The porosity of additive modified $ZrTiO_4$ decreased monotonically with increasing additive content by 5 wt% regardless of additive types and saturated for further increase of additive by 10wt. The flexural strength of $Al_2O_3$ (5, 10 wt%) modified $ZrTiO_4$ shows a large increase, but that of other additives modified $ZrTiO_4$ decreased. The thermal expansion coefficient of additive modified $ZrTiO_4$ except $Nb_2O_5$ decreased continuously with the content of additive. In particular, the lowest thermal expansion coefficient of $ZrTiO_4$ was obtained for the additive of $SiO_2$.