• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.4
• /
• pp.799-808
• /
• 2007

BACnet is an international standard communication protocol especially designed for building automation and control systems. BACnet uses the Master-Slave/Token-Passing (MS/TP) protocol as one of its field-level networks. A BACnet MS/TP field controller prototype and MS/TP network monitoring system are developed in this study. This report introduces the design and implementation methodology of a BACnet MS/TP field controller hardware, firmware and protocol stack. This report also presents the implementation methodology of BACnet MS/TP network monitoring system using VTS (Visual Test Shell). The methodologies introduced in this report will facilitate the develop and implementation of the BACnet-based control systems in building automation area.

• Proceedings of the KIEE Conference
• /
• 2006.07d
• /
• pp.2015-2016
• /
• 2006

본 논문은 전원출력단(outlet)에 연결된 이산적인 사무용 및 가전기기들의 전력사용을 실시간으로 감시 센싱하고 이들 간의 데이터 전송 및 사용상태를 파악하여 최적의 전력 사용 환경을 유지 할 수 있도록 제어해 주는 설비장치와 전력선통신의 신호전달을 원활히 하기위한 전력선 통신 리피터의 개발에 관한 것이다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.10a
• /
• pp.134-137
• /
• 2008

현재 에너지 시장은 신흥 개발 도상국의 화석 에너지 사용량 급등 등의 요인으로 인해 고유가 시대가 지속될 것으로 전망되고 있다. 또한 화석 에너지 사용으로 지구 온난화가 지속되고 있으며, 이에 온실가스 배출을 규제하기 위한 유엔기후변화협약 및 환경변화 문제 해결을 위한 사회적인 합의가 이뤄지고 있다. 그러므로 다양한 신재생 에너지원의 연구 개발 및 사용이 가속화되고 있으며, 그중 기술적으로 가장 근접한 것이 태양광 발전이다. 본 논문은 당사에서 개발하는 50kW 태양광 PCS의 운전 상태를 감시하고, 필요 요소를 제어하며, 취득된 데이터를 eRTU 등의 상위 시스템에 개방된 프로토콜로 통신을 통해 올려주는 태양광 PCS HMI Unit에 대해 논하였다.

• Proceedings of the KIEE Conference
• /
• 2005.07e
• /
• pp.91-93
• /
• 2005

본 논문에서는 전력기기의 온라인 진단을 위하여 개발된 모니터링 시스템에 대하여 소개하고자 한다. 개발된 진단 플랫폼은 전력기기의 온라인 진단을 위해 측정된 부분방전 신호를 이용하여 진단을 위한 파라미터를 추정하고 추정된 결과를 인터넷을 통해 실시간으로 모니터링 할 수 있도록 제작되었다. 개발된 진단 플랫폼은 연산처리를 위한 DSP 신호처리 부분과 웹서비스를 위한 VM부분으로 구성되어 있다. VM부분은 스트롱암 기반의 플랫폼을 적용하였으며 리눅스 환경에서 자바 가상머신을 이용하여 웹 서비스를 구현하였다. 본 논문에서 제시된 기술은 향후 산업용 장치들의 웹 기반 진단 및 모니터링 기술에 이용될 예정이며 또한 스마트 센서 모듈 및 분산 제어 시스템 모듈 개발에 응용될 수 있다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.6A
• /
• pp.813-817
• /
• 2000

A bidirectional 4-fiber path switched WDM ring is proposed, which provides 1:1 system protection for a digital client layer such as SONET system. It can provide better optical SNR than usual bidirectional line switched ring. Two implementation schemes are proposed and especially, a distributed control scheme is found to be feasible in simple structure with good performance even without supervisory channel.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.523-524
• /
• 2007

현재까지 변전소에 구축되어있는 변전소 자동화 시스템은 기존 설비를 바탕으로 지능형 장비(IED)를 추가한, 전력설비 자체의 인텔리전트화가 아닌 2차 설비(제어, 보호, 감시 장치)의 인텔리전트화를 지향하고 있었다. 그러나 본 실증변전소는 CT, PT와 같은 1차 설비에서부터 상위 시스템까지 전체 전력실비를 Intelligent화하였으며, Hardwiring되어 있는 시스템을 모두 통신과 S/W로 처리하였으며, 국내 최초로 Merging Unit을 개발, 적용하여 디지털 계전기를 검증하였다. 또한 향상된 예방진단 시스템 및 보안방재 시스템을 도입하여 변전소종합자동화 시스템을 구축하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.2
• /
• pp.288-294
• /
• 2011

In this paper, the FPGA-based SoC board (Xilinx Virtex-4 ML401 EVM) is adopted to control electrical power inverter system. For marine application, its performance is shown on PC-based system for monitoring electrical characteristics of a power inverter using by the NMEA 2000 protocol. This power inverter system is achieved in Real-Time monitoring and control by dual micro-processor operation on embedded FPGA-based SoC board. One micro processor is for control (Control processor) electrical power inverter using by PWM signal. And the other microprocessor (Communication processor) is for communication with PC-based monitoring system. The two-processor is communicating each other using by dual-port ram (DPRAM). PC-based system user can control and monitor information of the electrical power inverter via NMEA 2000 based communication processor. Control and monitoring information includes the inverter status and configuration. SoC board converts this information to Parameter Group Numbers (PGNs) in the NMEA 2000 protocol. This system can be applied to marine power electronics for distributed power generation, transmission or regulation systems on the ship.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.627-630
• /
• 2009

The combination of the marine use various multi sensor surveillance system technology with the development of servo motion control algorithm and gyro sensor in six freedom motion is implemented to analyze the movement response. The stabilization of the motion control is developed and Nano driving Precision Pan-Tilt/Gimbal system is obtained from the security positioning cameras with ultra high speed device is used to carry out the exact behavior of the device. The exact behavior will be used to make a essential equipment. Finally the development of the Nano Driving Multi Sensor, Nano of Surveillance System Driving Precision Pan-Tilt/Gimbal optimal design and production, 3-aix Gyro Sensor based with Servo Motion Control algorithm development, Image trace video software and hardware tracking the development is organized and discuss in details. The development of the equipment and the system integration are fully experimented and verified.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.05a
• /
• pp.474-478
• /
• 2001

This paper proposes integrated diagnosis system of motor for a ship. It carried out the safety diagnosis for insulation-resistor and current. The motor exposed to sea breeze and oil all the time is able to have problems as a over-current, reduction of the insulation-resistor and so on. These problems impact on the safety navigation, and occur a heavy casualties and loss of property. The proposed system is designed to verify continuous values of the insulation-resistor and current, and transfer them to a remote control room. The validity of the proposed system is verified through experiments on the 3-phase induction motor.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.24 no.4
• /
• pp.403-411
• /
• 2014

In this paper, an algorithm of extracting the features of home appliances and automatically building a database to identify home appliances is designed and presented. For the verification, a software library supporting this algorithm is implemented and added to an power management system server, which was already implemented to support real-time monitoring of home appliances' power consumption status and controlling their power. The implemented system consists of a system server and clients, each of which measures the power consumed by a home appliance plugged in it and transmits the information to the server in real-time over a wireless network. Through experiments, it is verified that it is possible to identify any home appliance connected to a specific client.