• 기계와재료
• /
• v.9 no.1 s.31
• /
• pp.113-128
• /
• 1997

• Journal of the korean Society of Automotive Engineers
• /
• v.16 no.5
• /
• pp.41-46
• /
• 1994

• Proceedings of the KIPE Conference
• /
• 2014.11a
• /
• pp.37-38
• /
• 2014

대형 버스 및 트럭 등과 같이 하중이 무거운 차량 같은 경우, 제동 부담이 아주 크다. 잦은 제동과 부하가 크기 때문에 마찰을 이용한 기존 방식의 브레이크들은 브레이크 파열 및 페이드 현상이 일어날 수 있다. 이러한 과부하를 분담하기 위해 현재 보조브레이크(리타더)를 사용하며, 이때의 제동에너지를 전기에너지를 회생하여 에너지를 절감하는 연구가 현재 활발히 진행되고 있다. 본 논문에서는 와전류를 이용한 전자기형 리타더의 해석 및 제어 방법을 다룰 것이며, 제동에너지를 전기에너지로 회생하기 위해 L-C 공진회로로 모델링하였다. 그리고 리타더에서 발생하는 전압을 간략히 다상변압기로 구현하였다. 제어장치의 구동펄스에 따라 바뀌는 공진회로의 전압을 분석하였으며, 이 전압을 제어하기 위한 제어기를 제안하였고 Matlab Simulink를 이용해 가상실험을 실행하였다.

• Proceedings of the KIPE Conference
• /
• 2014.07a
• /
• pp.297-298
• /
• 2014

현재 제동장치(Brake system)는 운동에너지를 열에너지로 바꾸어 공기 중으로 발산시킴으로서 제동 작용을 하는 마찰형 Brake가 대부분이다. 이러한 제동장치 속에는 리터더라는 제동력을 유발하는 장치가 있는데 이중 빠른 응답특성을 띄는 전기식 리타더의 단점인 전기에너지 소비 측면을 극복하기 위하여 제동에너지를 전기에너지로 회생하여 에너지를 절감 할 수 있는 기술이 선진국에서는 이미 진행이 되고 있다. 본 논문에서는 리타더에서 발생되는 3상 전압을 정류하여 받은 DC전압을 입력으로 받아 24V로 강압시키고 배터리를 충전하는 DC-DC 컨버터를 제작하고 이에 따른 보완점 및 타당성을 실험을 통하여 검증하였다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.43-48
• /
• 2005

In order to facilitate technical exchange among nations and/or institutes through the establishment of mutual recognition and the reliability guarantee of testing results by testing standards standardization, the interlaboratory comparison tests on brake discs and linings between KRRI and CARS were conducted. So far, two ways of comparison tests were performed for a better understanding of mutual recognition and standardization in railroad brake linings between Korea and China. In this paper, the first and second comparison testing results have been summarized, and the suggestions for the future research work are also presented to encourage extensive research on comparison study of railroad brake discs and linings between KRRI and CARS. Eventually, the final goal of the current research will be the establishment of standardization of railroad testing standards.

• Journal of the Korean Society for Railway
• /
• v.17 no.4
• /
• pp.223-227
• /
• 2014

The brake pad is one of the basic brake elements of a railway vehicle. It accomplishes braking action by friction between a pad and a brake disc. Because the brake pad must endure specified high pressure, the compressive strength is managed as the main performance factor. The standards for measuring the compressive strength of brake pads are KRS, KRCS, and KRT. These standards specify the size of the test piece for measuring compressive strength as $20mm{\times}10mm{\times}15mm$ ($W{\times}D{\times}H$). To reduce the uncertainty of the compressive strength, factors of uncertainty were analyzed. The results show that changing the dimensions of the cross section was useful to reduce the uncertainty. The uncertainty due to the new cross-sectional dimension shows the effectiveness of reducing uncertainty.

• Proceedings of the KSR Conference
• /
• 2000.11a
• /
• pp.219-225
• /
• 2000

This study is to develop a Fe-based disc brake lining with sponge structure for rolling stock of 150km/h train and to concept design with 3 groove type for brake disc reducing hot hair-crack and certainly friction coefficient. The developing brake lining would be to presumption of saving 300 million won during one year

• Proceedings of the KSR Conference
• /
• 2006.05b
• /
• pp.1151-1156
• /
• 2006

• Tribology and Lubricants
• /
• v.30 no.4
• /
• pp.240-245
• /
• 2014

Low alloy heat resistant brake disk and sintered brake pad are applied to mechanical brake system for the speed-up of urban rapid transit. In this research, we analyzed how the frictional characteristics between brake disk and pad are influenced by the disk mass. At a high disk mass, the friction stability was the lower value as a result of the lack of tribofilm formation at the disk surface. Wear rates of friction materials showed the higher value at a low disk mass and wear rates of 10 mm and 15 mm showed the similar level. Average friction coefficient was the lower value at the 10 mm disk thickness and range of variation of average friction coefficient was also the smaller value at the 10 mm disk thickness. However, there were no significant changes in the friction coefficients under any of test conditions. Surface roughness of a disk showed the highest value at the 5 mm disk and surface roughnesses of 10 mm and 15 mm showed the similar level. As a result, friction characteristics of disk mass influenced the friction stability, as well as the wear rate of friction pad and disk, but not the friction coefficient.

• Journal of the Korean Society for Railway
• /
• v.12 no.1
• /
• pp.72-80
• /
• 2009

The tribiological characteristics such as friction coefficient, friction stability, wear rate and braking temperature between various types of metallic friction materials and heat resistant steel disk, were investigated by using lab-scale dynamometer. Friction materials for high speed train have higher friction coefficient and friction stability as compared to aircraft friction materials even though friction materials for high speed train have lower wear rate. In addition. Cu-matrix friction materials have higher temperature increase rate than Fe-matrix friction materials. All friction surfaces have Fe-base oxide layer after completing test.