• Proceedings of the Korea Contents Association Conference
• /
• 2016.05a
• /
• pp.427-428
• /
• 2016

본 논문은 차량 간 통신을 이용해 차량 간 거리를 줄임으로써 도로의 용량을 증가시키기 위한 효과적인 방법을 제공한다. 차량 간 거리는 차량의 제동능력에 의해 결정된다. 편대운항시스템의 차량 간 통신을 이용해 제동능력에 관련된 계수를 공유함으로써 서로간의 제동거리를 알 수 있다. 따라서 서로의 제동능력을 확인 후 차량 간 최소 거리를 측정하여 도로의 용량을 증가시킬 수 있다.

• Journal of the korean Society of Automotive Engineers
• /
• v.2 no.2
• /
• pp.21-24
• /
• 1980

차량의 제동장치는 제동시 차량의 조향안정성을 유지하면서 최소한의 제동거리를 확보하는 장 치라 할 수 있다. 제동시 차량의 조향안정성 유지와 최소제동거리를 확보하기 위해서는 차량의 적절한 제동능력에 필요한 전제동토오크를 전후륜의 제동장치에 적당하게 배분시켜야 한다. 그러나 차량의 각차륜의 하중 상태는 여러 가지 적재상태와 제동시중량이동 등에 따라 변하게 되므로 고정된 제동장치로서는 전후륜의 제동토오크를 가변시킬 수 없어 설계시 빈도가 높은 조건에 맞추어 제동장치의 구성부품을 확정할 수밖에 없다. 차량에 따라서는 축하중상태의 변 화가 큰 경우와 공용화를 위하여 여러 모델의 차량에 동일제동 장치를 적용하려고 할 경우에 문제점이 따르기 마련이다. 본고에서는 제동장치의 전후륜의 제동토오크 배분에 대하여 고찰하여 설계개념을 파악하고자 한다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.6
• /
• pp.114-119
• /
• 2007

Because the small trailers do not have the main brake system, it is difficult to gain the effective braking performance of the trailers while driving them. Especially it is very hard to brake them on the slope road condition. So we have technically developed Inertia Braking System for the military trailers which have not main braking system. Inertia Braking System is designed to be activated by the inertia force of trailer. It consists of the brake rod, damping cylinder, hand brake lever and brake cables. We have tested the trailer's braking performance. As a result, we have showed that the trailer's braking performance of the trailer equipped with Inertia Braking System, the road driving performance and the braking safety capability are improved dramatically. And we hope that it is rare to happen the accident while driving.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.6D
• /
• pp.587-597
• /
• 2010

When a car accident occurs, people who had an accident are not free from civil and criminal issues so that the accident investigator should reenact and analyze the accident situation accurately. In addition, the obtained documents through the analysis of such car accident occurrence and related factors have to be used to carry out the improvement of the areas that has numerous car accidents and complementary actions. The vehicle speed, accelerating force, braking power are currently known as the most affecting factors in accordance with many car accidents, traffic facilities, road design, etc. The vehicle's performance and rode friction coefficient road surface friction coefficient are affecting the most closely in this field. Especially, once the estimate of the speed of the accident moment relating to main eleven articles of Traffic Accident Exemption Law is very important and accuracy is required. However, currently the researches of these matters have not made exclusively yet in Korea. In this study by reflecting this current situation, until the sudden braking history is found from the car's sudden braking, it estimates accurately the transient brake time and rode friction coefficient by measuring a time of transient brake time through the precision speed detector (Vericom VC2000PC). The analysis of the experimental results calculated the transient brake time and friction coefficient to fit into the purpose of this study in the basis of different kind of various special purpose asphalt pavement and slip-prevention pavement and provided the fundamental data.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.2
• /
• pp.760-771
• /
• 2012

In this paper, a blind spot of motor car, and the put case that is driven the miniature model motor system, when make practical application of the permanent magnet synchronous motors(PMSM) braking and having had the ability that can all absorb regenerative power by means of electric brake which is occurred. a tow system of a miniature model motor traction system is established by 1C1M methods to control individually permanent magnet synchronous motors (PMSM) of each motor. vector control method is applied in order to improve ride quality of motor car and the efficient use of energy. it was obtained excellent experiment results from the simulations as a function of momentum load and miniature model. Also, this study is investigated the regenerative braking power securities of permanent magnet synchronous motors, speed detection to stop electric brake at extremely very low speed and motor control method of algorithm.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.9
• /
• pp.893-900
• /
• 2016

Output response for prototype system is analyzed according to the pole locations and the damping ratio changes. The system modeling is constructed for RLC-circuit and the output response is analyzed for both a unit-step and a sinusoidal input. The survey is conducted to estimate the understanding ability on the automatic control. A high understanding ability is shown up in analysing the transfer functions of control system. And improvement is manifest in the ability to understand the output response according to the parameter changes. But some difficulty is revealed in acquiring the output responses in time domain.

• Journal of Advanced Navigation Technology
• /
• v.17 no.5
• /
• pp.524-544
• /
• 2013

In this paper, A tow system of miniature establishes each motor to individual 1C1M methods to control for a permanent magnet synchronous motors (PMSM) is constructed. You assume that is wiring having had the ability that can all absorb regenerative power which occurred when permanent magnet synchronous motors(PMSM) brake is all used to it, and to occur about agreement use scope expansion my electricity. To regenerative braking power securities of a PMSM and to stop of the bronzes my a control security, and that the electricity as you apply to vector control method and an speed sensor of controller to microprocessor, And you studied to speed, motor electricity energy control method to the algorithm and you brake a revival by regenerative braking power securities of a permanent magnet synchronous motors. It is proposed that motor control method to the algorithm you brake a revival by electricity braking power securities, you do to simulations regarding a momentum load and experiment.

• Journal of Korean Society of Transportation
• /
• v.24 no.1 s.87
• /
• pp.53-58
• /
• 2006

The purpose of this study was to test the safety of the heel rest which was made for reducing the automobile driver's muscle fatigue with automatic transmission. Sixty subjects participated in the test, including ten males and ten females in 30s, 40s, 50s, respectively. Simulator consisted of automobile cockpit, accelerator and brake pedal sensor, heel rest. and driving displays. 30 seconds were given to subjects to be accustomed to the simulator environment. They also had one pre-trial to use the brake pedal according to the experimental scenario. They were told to step on the brake pedal immediately as soon as the red light was on the display The reaction time representing the foot travel time between accelerator and brake pedal was measured with/without the heel rest. In results, there was no significant difference in reaction time between conditions with/without heel rest. The result indicated that the heel rest used in this study would be a safe accessory for drivers who need to reduce the fatigue of the muscle or joint during driving.

• Journal of the Korean Society for Railway
• /
• v.14 no.2
• /
• pp.100-108
• /
• 2011

This paper investigates the structural stability and reliability on improving performance of flexible brake pad used in high speed train. To this end, an improved model of flexible pad was obtained through structural analysis. Brake pad specimens were subjected to modal, stroke and endurance tests to examine the dynamic characteristics and mechanical stability. The hot spot generation with increasing rotational speed was observed on chassis dynamometer equipment and then the structurally uniform contact between the disc and pad was achieved. The temperature distribution of flexible pad was measured using the infrared camcorder. Hence, the proposed flexible pad showed the better structural stability and thermal energy emission.

• Journal of Korean Physical Therapy Science
• /
• v.29 no.4
• /
• pp.43-53
• /
• 2022

Background: It is suggested that the decline in functional level due to aging influences the increase in traffic accidents among elderly drivers. Among the functions related to the driving behavior of older drivers, physical function is related to muscle strength and motor control, and aging causes deterioration of motor control and a defect in motor output variability. Method: Data Search The online databases used for literature search are PubMed, ProQuest(PML), NDSL, and literature searches were conducted from April 19 to April 26, 2022. For the search, 'aging', 'driving', and 'braking' were used in the investigation. Results: The physical functions related to the braking ability of elderly drivers were analyzed in muscle strength, reaction ability, motor control, and other related factors. In terms of muscle strength, 3 studies analyzed the above factors. 8 studies analyzed the above factors for response ability. For motor control, two studies analyzed the above factors. In addition, related factors were analyzed in one piece. Conclusion: As a result of the analysis, physical function for reaction ability showed the highest frequency, followed by the strength item with the highest frequency. This study suggests that factors that can increase physical function must be included in the development of a rehabilitation program for the driving ability of the elderly.