• Applied Chemistry for Engineering
• /
• v.5 no.2
• /
• pp.345-356
• /
• 1994

Each of the three cationized compounds synthesized previously, poly(OMA-co-DAMA)[PODC], poly(DMA-co-DAMA)[PDDC] and poly(EMA-co-DAMA)[PEDC] was blended with waxes, emulsifiers and cationized fatty carbamide(ODTCC) synthesized in this study for the preparation of some durable softening water-repellenting agents, PODCW, PDDCW and PEDCW. The results of washability, tearing strength, crease recovery and contact angle of the cotton fabrics treated with PODCW, PDDCW and PEDCW with and without textile finishing resin, showed remarkable improvement of the physical properties. Rating of water repellency of cotton fabric treated with PODCW was 80, but those treated with PDDCW and PEDCW were not high enough to use in industry. Proper curing temperature of the synthesized water-repelleting agents was $140^{\circ}C$; proper using concentration was 3wt%; sodium acetate was the best catalyst for water-repellenting agents among the used, and proper concentration was 0.6wt%. From the results of reaction mechanism of cellulosic fiber with water-repellenting agent and washability of the fibers treated with water-repellenting agents the prepared water-repellenting agent proved to be durable. Surface structures of cotton fabrics treated with water-repellenting agent were investigated by SEM.

• Applied Chemistry for Engineering
• /
• v.23 no.1
• /
• pp.112-118
• /
• 2012

In this study, physical properties of synthesized DE7-OSA82-AO and DEP52-OSA82-AOQ82 zwitterionic surfactants were measured such as critical micelle concentration, surface tension, interfacial tension, contact angle and viscosity. Phase behavior study was also performed. The dual function characteristics of a zwitterionic surfactant were investigated by determining an isoelectric point, which was attained using zeta potential measurements and QCM (quartz crystal microbalance) experiments. The isoelectric point of DE7-OSA82-AO surfactant determined by the zeta potential measurement and QCM experiment was about 7.2 and 7.4, respectively. On the other hand, the isoelectric point of DEP52-OSA82-AOQ82 surfactant determined by the zeta potential measurement and QCM experiment was about 10.9 and 11.0, respectively. The frictional property measured using an automated mildness tester showed that DE7-OSA82-AO surfactant can provide a good softening effect at an acidic or neutral condition. On the other hand, DEP52-OSA82-AOQ82 was found to provide a good softening effect to a fabric surface at a pH below its isoelectric point of 11.

• Applied Chemistry for Engineering
• /
• v.23 no.1
• /
• pp.77-85
• /
• 2012

Production process of the flexible ceramic foamed body through the complexation with the fiberous sepiolite and expanded pearlite was researched. The processing of fibrillation of the inorganic mineral fiber sepiolite is the most important whole processing for manufacturing of the ceramic foamed body consisting of the expanded perlite and sepiolite. The fibrous sepiolite and expanded pearlite are blended and becomes the slurry phase. And this slurry phase is converted to a massive foamed body through the low temperature heat treatment process less than $300^{\circ}C$. The heat-treatment process of the slurry phase composite has to be designed to include the evaporation step of the moisture remaining among the slurry composition, foaming step by the decomposition of the foaming agent, and resolution removal step of the organic material which was added in the composite remained after the foaming step. The heat treatment process should be considered as significant factors in design of total process. As to the condition of heat treatment process and foaming agent, there was the a correlation. An organic type foaming agent like DSS (dioctyl sodium sulfosuccinte) was effective in foaming of the slurry compound consisting of the expanded perlite and sepiolite fiber.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.22 no.8
• /
• pp.1060-1068
• /
• 1998

The effects of various catalysts and softners on the anti-crease finish of ramie with glyoxal were investigated. A number of metal salts commonly used as Lewis acid catalysts in DP finishing of cotton with formaldehyde and N-methylol agents were screened for glyoxal treatment of ramie fabric. Various organic and inorganic acids were mixed with Lewis acid catalyst as co-catalysts to improve catalytic activity. As a result, the combination of aluminum sulfate and citric acid was proven highly effective in catalyzing the crosslinking of ramie cellulose by glyoxal under lower curing temperature. With a mixed catalyst, performance properties, such as whiteness and tearing strength as well as wrinkle recovery of treated ramie fabric were improved as compared with that treated with aluminum sulfate alone. Additional improvement of tearing strength and wrinkle recovery was achieved by applying silicons softner in the treatment bath.

• Applied Chemistry for Engineering
• /
• v.9 no.4
• /
• pp.603-607
• /
• 1998

Cellulose was reacted with ethylene oxide to get hydroxyethylcellulose. Quaternary ammonium salt was produced by reaction of epichlorohydrin and trialkylamine. The epoxide ring was opened by acid addition to 3-chloro-2-hydroxypropyltrialkylammonium chloride. Previously unreported two compounds, hydroxyethylcellulose-2-hydroxypropylammonium chloride ether and hydroxyethylcellulose-2-hydroxypropyltriethylammonium chloride ether were synthesized by substitution reaction of hydroxyethylcellulose with glycidyltrialkylammonium chloride or 3-chloro-2-hydroxypropyl-glycidyltrialkylammonium trialkylammonium chloride. All of the compounds including starting materials and reaction intermediates were characterized by $^1H$-NMR and FT-IR spectroscopy.

• Proceedings of the Korean Information Science Society Conference
• /
• 2004.04b
• /
• pp.682-684
• /
• 2004

초.중등학교에서는 교우학사관련 업무경감과 교육행정업무의 효율성 및 온라인 민원서비스 제공을 목표로 학교정보관리시스템을 활용하고 있다. 본 논문에서는 2003년 새로 도입한 교육행정정보시스템(NEIS)에서 건강관리 학교급식관리, 학교시설.장비관리 영역의 사용자 중심의 편이성과 현장 적함성에 대한 개선 방안을 강구하였다. 그 결과는 다음과 같다： (1) 학교와 의료기관에서 건강정보를 공동으로 관리.활용할 수 있는 평생건강관리체제가 국가인적자원관리에 더욱 효율적이다. (2) 법.제도, 업무절차, 표준화, 정보기술측면의 내실화된 학교급식관리가 요구된다. (3) 자재명세서(Bill of Material： BOM)와 워크플로우를 활용한 개선방안이 교육정보화 시설.장비관리에 효율적이고 업무처리변화에 유연함을 확인하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.4
• /
• pp.224-234
• /
• 2017

This paper compares the realities of the salary Peak Policy's status and management processes in Korea and Japan, with the aim of determining the development direction for Korea's salary Peak Policy's. Unlike Japan, which successfully achieved close cooperation between government, firms and workers in implementing the Retirement Age Extension Type salary Peak Policy, Korea experienced many problems due to lack of preparation. In order to rationally develop the salary Peak Policy, the government, firms, and workers must cooperate to increase the policy's efficiency via the following steps. First, gradually increase the proportion of retirement age extension. Second, career development that takes into account the various employment types, flexible working hours and aged workers. Third, development of training programs for senior citizen workers, as well as increasing support for changing of jobs and startups. Fourth, expansion of re-employment after retirement age and ways to make use of the skilled labor. Fifth, increasing work efficiency through bonuses and work evaluation that is specialized for aged workers. This paper argues that such measures are necessary for the co-existence of firms and workers, as well as for improving employment stability and labor market flexibility.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.1
• /
• pp.61-70
• /
• 2020

In this study, the IOT-based desk layout method was proposed to complement the existing seating method and to improve the work efficiency. The IoT system for the desk layout needs determining the function, type and network protocol of the sensor to find out the working status of the desk to reasonably assist the worker's seat placement. A collection method was proposed. The algorithm used in Block Stacking was used when deciding how to allocate seats using the acquired data. As a result, we could suggest an arithmetic basis for rational desk layout in IoT environment and show that it can be applied to an advanced flexible seating system based on working type in addition to the preferences of employees in the future.

• Journal of Energy Engineering
• /
• v.10 no.2
• /
• pp.90-104
• /
• 2001

일일 최대 석탄처리 용략이 3톤인 건식 석탄가스화기를 사용하여 가스화에 미치는 주요 변수들중 산화제내 산소농도와 증기 주입량을 변경시켜 가스화성능을 조사하였고, IGCC용 대성석탄을 선정하는 입장에서의 주요 인자 및 고온고압 조건에서의 가스화기 운전상 특성과 문제점을 파악하여 운전상 문제에 대한 대책을 제시하였다. 사용한 석탄은 유연탄인 중국 대동탄과 아영청탄인 미국 알라스카의 유시벨리탄에었는데, 두 탄중 모두 건식 가스화기의 운전상에는 문제가 없었다. 가스화를 위한 산소의 농도는 90%까지 그리고 석탄시료 무게 대비 증가량 10∼12%까지는 가스화의 온도 유지와 가스조성 측면에서 무리 없이 적용할 수 있다고 판단되었다. 이들 가스화 시험을 통하여 생성된 슬랙은 가스화기 슬랙탭의 조업 온도와 대상석탄 회재의 용융특성에 따라 침상 또는 알갱이 형태로 배출되었으며, 슬랙으로부터 중금속 성분이 유출되는지를 분석해 본 결과 침출수에 의한 2차 오염은 없는 것으로 확인하였다. IGCC용 석탄을 선정하는 석탄특성에서는 미분탄의 수분함량, 회재함량, 회재용융온도, 발열량 측면에서 검토하였는데, 건식가스화기의 경우 미분탄의 표면수분의 제거가 중요하고 회재의 함량과 회재의 용융온도를 같이 고려하여 적정한 시료 석탄이 선정되어야 한다는 결론을 얻었다. 가스화기 운전측면에서는 여러 기계적인 문제점들이 발견되었는데 시료공급노즐의 막힘문제, 역화문제, 고온가스 누출문제, 추운 겨울 운전시 오링(O-ring)문제 등에 대한 논의와 대책을 제시하였다.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.11a
• /
• pp.53-53
• /
• 2011

자동차용 천연가죽 시트의 제조 공정에서 크롬과 비크롬 Metalic 탄닝제, 식물성 탄닝제, 신탄(Syntan) 및 가지제(Fatliuor) 등의 종류와 함량에 따른 인장강도, 신장율, 정하중 신율, 잔류줄음율 등을 측정하여 특정하중에 따른 콜라겐 섬유 조직의 영구변형율과의 상관관계를 비교 분석해본 결과, 크롬 및 비크롬계 탄닝제에 비해 식물성 탄닝제를 적용하였을 때 조직의 변형율이 적었으며, 리틴닝 공정에서 아크릴계, 레진계 및 단백질계 신탄을 혼합 적용하였을 때 가죽의 배(Belly)부위의 물성 균일화 효과가 우수하였으며, 음이온성 가지제 9%를 사용하여 가죽에 유연성을 부여함으로써 조직이 치밀하고 변형율이 감소되어 내구성이 우수한 결과를 나타내었다.