• Journal of Digital Convergence
• /
• v.10 no.8
• /
• pp.201-210
• /
• 2012

Because sensing odor varies depending on each person, even if the odor is released in line with the legal emission permission concentration levels, it can still become a social issue if a civil complaint is made. The purpose of this research is to study the possibility of putting Mn-Cu metallic oxide catalysts into practical use to economically eliminate acetaldehyde which produces a odor in the industrial process. An optimal operating parameter to eliminate acetaldehyde was deduced through a performance evaluation in the research laboratory and the performance was verified by applying the parameter into an actual facility as an on-the-site experiment through a Scale-up of pilot size. The operating temperature of the metallic oxide catalysts researched so far was at the minimum close to $220^{\circ}C$, and the $220^{\circ}C$ elimination efficiency was 50% or below. However, having experimented by using a Mn-Cu metallic oxide catalyst in this research, optimum elimination efficiency showed when space velocity (GHSV) was equal to or below 6,000 $hr^{-1}$. The average elimination efficiency was 61.2% when the catalyst controlling temperature was $120^{\circ}C$, 93.3% when the catalyst controlling temperature was $160^{\circ}C$, and 94.9% when catalyst controlling temperature was $180^{\circ}C$, thereby reflecting high elimination efficiency. The specific surface area of the catalyst was $200m^2/g$ before use, however, was reduced to $47.162m^2/g$ after 24 months and therefore showed that despite the decrease in specific surface area as time passed, there was no significant influence on the performance. Having operated Mn-Cu metallic oxide catalyst systems for at least two years on a site where there was no inflow of toxins like sulfur compounds and acidic gases, we were able to confirm that elimination efficiency of at least 90% was maintained.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.1
• /
• pp.97-104
• /
• 2010

At present, the biological nutrient removal (BNR) process for removal of nitrogen and phosphorus is being constructing to keep pace with the reinforced standard of effluent quality and the traditional activated sludge process of preexistence is being promoting to retrofit. At the most case of retrofitting, processes are subjected to be under consideration as alternative BNR process for retrofitting. However, process evaluation methods are restricted to compare only treatment efficiency. Therefore, when BNR process apply, process evaluation was needed various method for treatment efficiency as well as sludge production and aeration cost, and all. In this study, the evaluation method of alternative process was suggested for the case for retrofitting S wastewater treatment plant which has been operated the standard activated sludge process. Three BNR processes for evaluation of proper alternatative process were selected and evaluated with suggested method. The selected $A^2$/O, VIP and DNR processes were evaluated using the mathematical model which is time and cost effective as well as gathered objective evaluation criteria. The evaluation between 5 individual criteria was possible including sludge production and energy efficiency as well as treatment performance. The objective final decision method for selection of optimal process was established through the fuzzy inference.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2000.04a
• /
• pp.542-545
• /
• 2000

본 연구에서는 다품종 주문 생산 방식이 가지고 있는 여러 문제점들 중의 하나인 조립시스템에서의 소량 생산의 문제점을 해결하기 위해 효율적인 조립자동화 시스템을 통해 난점들을 해결하고자 한다. 본 연구의 내용은 첫째, 제품 및 구조의 분석으로 제거 및 통합 가능한 부품 파악을 하며 불필요하거나 생산 및 조립 용이성이 떨어지는 요소를 제거한다. 둘째, 취약 공정의 분석으로써 취약공정의 개선효과를 파악하고 근접 작업장과의 원활한 공정 흐름을 고려하여 취약공정 유무 파악 및 우선 개선 공정을 결정한다. 셋째는 조립시스템에 적합한 대안의 제시로써 자동화를 위한 적절한 메커니즘을 제시한다. 마지막으로 넷째, 제시된 대안의 평가를 통해 적합성 여부 판정한다. 즉, 미리 설정된 평가 기준에 의한 대안의 평가를 내리게 된다.

• 한국IT서비스학회:학술대회논문집
• /
• 2002.06a
• /
• pp.249-257
• /
• 2002

B2B EC 플랫폼에서의 구매 프로세스를 지원하기 위한 구매자 쇼핑카트는 위치에 따라 판매자쪽의 s-cart, 중개자쪽의 i-cart, 구매자쪽의 b-cart로 분류할 수 있다. 본 논문에서는 B2B EC에서의 구매자 쇼핑카트의 요구기능을 사용자 식별, 상품정보수집, 물품정보제거, 주문처리, 지불처리, 진행사항 추적, 구매기록, 구매의사결정지원, 전자구매시스템에 구매기록 전송 등 9 가지로 제시하고, 이러한 관점에서 각 구매자 쇼핑카트에 대한 정성적인 비교 분석을 시도한다. 그리고 효율평가모델 제시를 통한 정량적인 분석과 상장기업 30개사의 구매직원에 대한 인터뷰를 통한 변수값 설정을 통해서 B2B EC환경에서의 구매자 쇼핑카트의 효율성 평가를 시도한다. 본 논문을 통해서 B2B EC환경에서는 b-cart 방식의 구매자쇼핑카트 방법이 효율적인 플랫폼임을 제시한다.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.5
• /
• pp.477-486
• /
• 2010

This study was performed with the object in which it improves the nitrification by using RBC, that is one of the biological waste water treatment process. By applying the Modified Dephanox process to RBC in this research in order to evaluate the improvement of the nitrification by RBC a research was conducted. There is the most conspicuous feature of the process of using RBC. it is that the nitrification can be smoothly performed even if the suspended solid of the high concentration as the interference factor in the nitrification tank is flowed in. Moreover, as a result of experiment, TCOD removal efficiency of the process showed up more than about 90%. when influent TCOD loading rate was 0.04~0.1 kg / $day{\cdot}m^3$. and T-N removal efficiency is high at about 75% in spite of the process operating of the laboratory scale was observed. Also, As increasing influent ${PO_4}^{3-}$-P, T-P loading rate, ${PO_4}^{3-}$-P, T-P removal efficiency was increased. Finally, it was elucidated that the utilization of RBC in external nitrification system resulted in not only high nitrification performance but also stable system operation by minimizing inhibitory effect of overflowed suspended solid (SS).

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.1
• /
• pp.7-14
• /
• 2006

In this study, nitrogen removal characteristics of SBR3 process, which is two-sludge system of sequencing batch reactor(SBR) type, were investigated, with comparison of those of SBR1 process, which is conventional SBR process, and SBR2 process, which was designed to enhance denitrification efficiency through step-feeding of wastewater, using domestic wastewater. SBR3 process of two-sludge type can perform external nitrification, on which nitrification occurs in separated reactor, and enhanced denitrification using biosorbed organics. In the results with domestic wastewater, T-N removal efficiency of SBR3 process was better than those of SBR1 and SBR2 processes. It was observed that bigger difference of T-N removal efficiency between SBR3 process and SBR1 & SBR2 processes was showed at low C/N ratio than that at high C/N ratio resulting from more efficient use of organics by biosorption mechanism in denitrification of SBR3 process than those of SBR1 and SBR2 processes. In addition, T-N removal efficiency of SBR3 process according to influent T-N loading rate was better than those of SBR1 and SBR2, even though influent T-N loading rate of SBR3 process was higher than that of SBR1 and SBR2 process resulting from operation of SBR3 process in short hydraulic retention time(HRT) by external nitrification.

• Journal of Animal Science and Technology
• /
• v.49 no.2
• /
• pp.279-286
• /
• 2007

A submerged biofilm sequencing batch reactor (SBSBR) process, which liquor was internally circulated through sandfilter, was designed, and performances in swine wastewater treatment was evaluated under a condition of no external carbon source addition. Denitrification of NOx-N with loading rate in vertical and slope type of sandfilter was 19% and 3.8%, respectively, showing approximately 5 times difference, and so vertical type sandfilter was chosen for the combination with SBSBR. When the process was operated under 15 days HRT, 105L/hr.m3 of internal circulation rate and 54g/m3.d of NH4-N loading rate, treatment efficiencies of STOC, NH4-N and TN (as NH4-N plus NOx-N) was 75%, 97% and 85%, respectively. By conducting internal circulation through sandfilter, removal performances of TN were enhanced by 14%, and the elevation of nitrogen removal was mainly attributed to occurrence of denitrification in sandfilter. Also, approximately 57% of phosphorus was removed with the conduction of internal circulation through sandfilter, meanwhile phosphorus concentration in final effluent rather increased when the internal circulation was not performed. Therefore, It was quite sure that the continuous internal circulation of liquor through sandfilter could contribute to enhancement of biological nutrient removal. Under 60g/m3.d of NH4-N loading rate, the NH4-N level in final effluent was relatively low and constant(below 20mg/L) and over 80% of nitrogen removal was maintained in spite of loading rate increase up to 100g/m3.d. However, the treatment efficiency of nitrogen was deteriorated with further increase of loading rate. Based on this result, an optimum loading rate of nitrogen for the process would be 100g/m3.d.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.52 no.6
• /
• pp.57-62
• /
• 2010

본 연구는 자유수면형 인공습지에서의 시기적인 중금속 제거율의 변동을 평가하기 위하여 수행되었다. 대상 인공습지의 유입수는 하수처리수가 포함된 하천수이다. 인공습지에는 갈대 (Phragmites australis)와 부들 (Typha latifolia)이 주로 분포하며, 이들 두 종은 습지의 95 % 이상을 차지하는 우점종이다. 2009년 5월부터 9월까지 습지의 유입과 유출부분에서 유입수와 유출수를 시료 채취하였다. 채취된 시료는 ICP-AES 방법을 이용하여 6가지 중금속을 분석하였으며, 위해성 평가를 이용하여 카드뮴 (Cd), 크롬 ($Cr^{+6}$), 비소 (As), 납 (Pb), 니켈 (Ni), 구리 (Cu)의 분석 결과를 평가하였다. 위해성평가는 농부와 레크리에이션에 대한 두가지 시나리오를 바탕으로 이루어졌다. 연평균 중금속 제거율은 계절적인 변화 측면에서 큰 변화를 나타내지 않았다. 위해성 평가 결과 시료가 채취된 부분 및 계절적인 변화 대부분에서 US EPA의 기준인 $10^{-4}$를 초과하지 않는 수준으로 허용가능한 수준이었다. 하지만, 봄철 농부에 대한 위해성평가 결과 위해도가 $10^{-4}$ 수준이며, $10^{-6}-10^{-8}$ 수준은 질병의 이동이 우려되는 수준 (US EPA)임을 감안하여, 인공습지에 중금속 농도 저감 시설의 설치를 고려해야 한다. 본 연구에서는 위해성 평가를 가상의 시나리오에 적용하여 평가를 시도함으로서, 수치적인 자료로 제시할 수 있을 뿐만 아니라 중금속의 정량적인 평가를 수행할 수 있었다. 따라서 위해성 평가는 인공습지의 안전성에 대하여 대중과 소통할 수 있는 도구로서 이용할 수 있으며, 인공습지의 효율적인 운영 및 현장 적용에 있어서 스크리닝 도구로서의 역할이 가능할 것으로 판단된다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.1 no.1
• /
• pp.83-90
• /
• 2000

DEA is a newly developed analyzing tool to measure efficiency evaluation of decision making units (DMU). It compares DMU by radial Projection on the efficient frontier. The purpose of this study is to show reference point approach used for searching solution in multiple objective linear Programming can be usefully used to determine flexible efficient frontier of each DMU In reference point approach, the minimization of ASF Produces an efficient points in frontier and enhances the usefulness of DEA by Providing flexibility in DEA and optimally allocating resources to DMU. Various DEA models can be supported by reference point method by changing the projection direction in order to choose the targets units, standards costs and management benching-marking.

• Journal of Periodontal and Implant Science
• /
• v.35 no.1
• /
• pp.163-176
• /
• 2005

3개월 동안 사용한 마모된 칫솔의 마모 정도와 양상을 관찰하고, 새 칫솔과 마모된 칫솔의 잇솔질 전 ${\cdot}$ 후 치태제거효율을 single-use design으로 비교 ${\cdot}$ 평가하여 3개월 주기의 칫솔 교체 주기의 근거를 임상적으로 확인 해보고자 하였다. 치주적으로 건강한 치과 대학생 42명을 대상으로 설문지를 통해 잇솔질 습관을 조사하고, 3개월간 동일한 칫솔과 치약을 사용하게 하였다. 3개월 후 피시험자를 무작위로 두 군(I, II)으로 나누고, 치석제거술을 시행한 뒤 2주후에 내원하도록 하였으며 내원 전 48시간동안은 잇솔질을 하지 않도록 지시하였다. 2주후 I군은 새 칫솔을, II군은 마모된 칫솔을 사용하도록 하였으며 잇솔질 전 ${\cdot}$ 후에 각각 구강 내를 erythrosin으로 염색한 후 6개의 Ramfjord 치아의 plaque score를 Patient Hygiene Performance (PHP) index로 측정하였다. 2주간의 washout period 후에 다시 치석제거술을 시행한 뒤, I군이 마모된 칫솔을, II군은 새 칫솔을 사용하게 하여 동일한 방법으로 PHP index를 각각 측정하였다. 마모된 칫솔은 수거하여 brushing surface area의 면적으로 마모도를 평가하였다. 결과는 paired t-test와 Pearson's correlation analysis로 통계처리 하였다. 2명이 탈락하였고 잇솔질 전 ${\cdot}$ 후에 대한 전체 부위, 치간 부위, 변연치은 부위의 plaque score는 두 칫솔 모두 통계학적으로 유의성 있게 감소하였으며 (p<0.0001), 두 칫솔을 비교한 경우에는 새 칫솔이 마모된 칫솔보다 치태 감소량이 통계학적으로 유의성 있게 많았다 (p<0.0001). 칫솔의 마모도는 평균 50.6% 증가하였으며, 마모도 증가에 따른 치태 감소량에는 직선적인 상관관계가 있었으나 통계학적인 유의성은 없었다. (전체 부위 r=-0.58, p=0.72 / 변연치은 부위 r=-0.50, p=0.76). Single-use design에서 3개월 동안 마모된 칫솔은 치태제거 능력에 있어서 새 칫솔보다 덜 효율적이였다. 칫솔의 마모도는 구강 위생 관리에 영향을 미치는 중요한 요인이며, 마모된 칫솔은 정기적인 교체가 요구된다. 또한, 치간 부위를 포함한 변연치은 부위의 치태를 정확하게 평가할 수 있는 치태지수에 대한 연구가 필요하겠다.