• Journal of Wetlands Research
• /
• v.7 no.4
• /
• pp.43-50
• /
• 2005

Wetlands can transform or remove pollutants from water body, such as nitrogen, phosphate, and organics. Many researches were conducted in relation to uptake process by aquatic plants in wetlands. However, water purification processes in wetlands are the results of physical, chemical and biological, especially microbiological reactions. As such, understanding on microbial processes is of great importance. In this study, we used pondor marsh-type wetland microcosms for investigating the water purification capacity and microbial functions, namely, extracellular enzyme activities, nitrification and denitrification. In a pond system, removal efficiencies of $NO_3{^-}$ and $PO{_4}^{3-}$ were 96% and 100 % respectively, while those in a marsh system were 94%, 100% respectively. These high removal efficiencies appeared to be caused by high adsorption ability to soils and microbial functions in wetland.

• Applied Chemistry for Engineering
• /
• v.19 no.1
• /
• pp.80-85
• /
• 2008

Catalytic filter is capable of performing shallow bed dust filtration plus a catalytic reaction, promoted by a catalyst deposited in its inner structure. Such a feature may allow potential cost and space reduction in several environmental applications. Dust filtration and halogenated volatile organic compound (1,2-dichlorobenzene) destruction were carried out in a lab-scale reactor. $WO_3-V_2O_5/TiO_2$ supplied by MaGreen, which showed high catalytic acitivity at low temperature, was used as a catalyst. P-84 that can be operated under $250^{\circ}C$ was used as a felt. The catalytic activity and filtration efficiency of catalytic filters were investigated under the operating conditions, including temperature, face velocity, and dust concentration. The catalytic activity of catalytic filter increased with increasing temperature and the amount of catalyst loaded. The test results showed that the filtration efficiency was primarily affected by the face velocity. Pressure drop variations as a function of time were investigated for a variety of conditions. In case of virgin filter, a dramatic decrease in the pulse interval and a slightly increase in the base line pressure drop were observed. A relatively slow pressure drop build-up was recorded for the catalytic filter due to smooth and slippery surface characteristics of nanofiber. The catalytic filter indicated that high filtration efficiency over 99.98% and high catalytic activity over 90% at 1 m/min and $210^{\circ}C$.

• Journal of the Korean GEO-environmental Society
• /
• v.18 no.12
• /
• pp.25-36
• /
• 2017

This research was conducted to investigate the removal characteristics of heavy metals and sulfate ion from acid mine drainage (AMD) by multi-functional zeolite-slag ceramics (ZS ceramics), in which natural zeolite and converter slag were mixed and calcined at high temperature. The batch test showed that the removal efficiency of heavy metals by pellet-type ZS ceramics increased as the mixing weight ratio of converter slag to natural zeolite increased. The optimal mixing ratio of natural zeolite to converter slag for the removal of heavy metals and sulfate ion from AMD was observed to be 1:2~1:3. The adequate calcination temperature and time of ZS ceramics for the treatment of AMD were found to be $600{\sim}800^{\circ}C$ and 2 hours, respectively. The removal test of heavy metals and sulfate ion from AMD by the ZS ceramics prepared in optimal condition exhibited very high removal efficiencies close to 100% for all heavy metals (Al, As, Cd, Cu, Fe, Mn, Pb, Zn) and 77.1% for sulfate ion. The experimental results in this study revealed that the ZS ceramics could function as an effective agent for the treatment of AMD.

• Clean Technology
• /
• v.23 no.3
• /
• pp.302-307
• /
• 2017

This study was conducted to evaluate the feasibility of in situ soil flushing for TPH-contaminated soil remediation with column test. The soil texture of the soil was sand and the initial TPH concentration was $9,369mg\; kg^{-1}$. 0.1% Tween-80 was selected as surfactant solution. And the acrylic and the glass syringe columns were used as reactors. In the acrylic column test, 35% of the initial TPH was removed in 1 PV of flushing and approximately 40% in 5 PV and finally 7 PV showed about 60%. The glass column test showed 3 ~ 12% higher removal efficiency than that of acrylic test until 5 PV of flushing. However, there was no difference in TPH removal efficiency when 7 PV of surfactant was finally flushed. Both of alum only and alum+polymer mixed surfactants showed also the best coagulation efficiency in $150mg\;L^{-1}$ of concentraion. When Tween 80 was newly dissolved in 0.1% to the recovered solution after the coagulation treatment, the removal efficiency was increased from 32.0% to 41.0% in comparison to the new 0.1% Tween 80 solution without reuse by coagulation treatment.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.5
• /
• pp.519-524
• /
• 2005

Due to the low C/N ratio of domestic wastewater characteristic, addition of external carbon source for the effective N and P removal is necessary. High organic content of food waste can be used for the external carbon source in biological nutrient removal processes, The applicability of condensate of food waste (CFW), which is produced during the high-rate fermentation process, was examined in membrane bioreactor for the nutrient removal. Under the various operating conditions, nutrient removal efficiencies and membrane fouling characteristics were evaluated using synthetic wastewater. From nitrate utilization rate (NUR) test, denitrification rate was 0.19 g $NO_3-N/g$ VSS/day. With the addition of CFW increased, average removal efficiencies of T-N and T-P could be increased up to 64% and 41%, respectively. Also the optimal retention time was 3 hr/5 hr for anoxic/aerobic reactor. When applied to real sewage, membrane fouling resistance was increased up to 60%, which could be reduced from $10.4{\times}10^{12}m^{-1}$ to $5.9{\times}10^{12}m^{-1}$ with the control of influent suspended solid concentration. In summary, it was suggested that CFW could be used as an economical and effective carbon source for membrane assisted biological N and P removal.

• Microbiology and Biotechnology Letters
• /
• v.45 no.4
• /
• pp.322-329
• /
• 2017

Two pilot-scale biocovers (PBCs) were installed in a landfill, and the methane ($CH_4$) concentrations at their inlets and outlets were monitored for 240 days to evaluate the methane removability. Consequently, the packing materials were sampled from the PBCs, and their potential $CH_4$ oxidizing abilities were evaluated in serum vials. The $CH_4$ concentration at the inlet of the biocovers was observed to be in the range of 23.7-47.9% (average = 41.3%, median = 42.6%). In PBC1, where a mixture of soil, earthworm cast, and compost (7:2:1, v/v) was employed as the packing material, the $CH_4$ removal efficiency was evaluated to be between 60.7-85.5%. In PBC2, which was filled with a mixture of soil, earthworm cast, perlite, and compost (4:2:3:1, v/v), the removal efficiency was evaluated to be between 29.2-78.5%. Although the packing materials had an excellent $CH_4$ oxidizing potential (average oxidation rate for $CH_4=180-199{\mu}g\;CH_4{\cdot}g\;packing\;material^{-1}{\cdot}h^{-1}$), $CH_4$ removal efficiency in PBC1 and PBC2 decreased to the range of 0-30% once the packing materials in the PBCs were clogged and channeled. Furthermore, seasonal effects exhibited no significant differences in the $CH_4$ removal efficiency of the biocovers. The results of this study can be used to design and operate real-scale biocovers in landfills to mitigate $CH_4$ buildup.

• Clean Technology
• /
• v.13 no.1 s.36
• /
• pp.16-21
• /
• 2007

This study estimated the effect of hydraulic residence time(HRT), influent total ammonia nitrogen(TAN) concentration, temperature and pH in the packed-bed bioreactor using immobilized nitrifiers. Removal rate of ammonia nitrogen was increased with decreasing HRT and the optimum HRT was 0.2 hour when influent TAN was $2g/m^3$. At this point, removal rate was $226.1\;g/m^3{\cdot}day$ and removal efficiency was 88.8%. Removal rate of ammonia nitrogen was Increased with increasing TAN concentration. Removal rate and efficiency of ammonia nitrogen were kept constant at $20{\sim}35^{\circ}C$ and pH $8{\sim}9$ value.

• Membrane Journal
• /
• v.30 no.5
• /
• pp.350-358
• /
• 2020

A membrane capacitive deionization (MCDI) cell is constructed by applying thin layer of a cation exchange membrane (Nafion) on cathode and an anion exchange membrane (aminated polyphenylene oxide, APPO) on anode. Compared to CDI cell without CEM and AEM coating, MCDI exhibits enhanced salt removal efficiency. When Nafion and APPO are used as CEM and AEM, optimized salt removal performance as high as 82.1% is observed when 1.2 V is applied for 3 min during absorption process and -1.0 V is applied for 1 min during desorption.

• The Transactions of the Korea Information Processing Society
• /
• v.5 no.6
• /
• pp.1494-1506
• /
• 1998

본 논문에서는 루프구조의 효율적인 병렬수행을 위한 병렬성 추출에 대하여 불변과 가변 종속거리에 모두적용할 수 있는 통합된 새로운 기법을 제시한다. 이것은 컴파일시간에 순차 루프를 중첩된 DOALL 루프로의 자동 변환에 대한 절차로서, 중첩 루프의 전체적인 병렬화를 하기 위하여 문장들을 반복적으로 수행시키는 것에 의해서 자료 종속을 효과적으로 제거하는 알고리즘이다. 본 논문에 제시된 방법은 성능평가에서도 매우 뛰어난 방법임을 보였다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2006.10c
• /
• pp.62-65
• /
• 2006

XML은 웹 상에서 데이터의 표현과 교환을 위한 표준이다. XQuery는 XML 질의를 위한 W3C 표준으로서 XML 문서를 효율적으로 검색하기 위해서 W3C에서 제안한 표준질의어이다. XQuery가 등장하면서, 이를 빠르게 처리하기 위한 연구가 많이 진행 중이며, 이 연구 중 한 분야는 XQuery 질의를 정제하는 것이다. 사용자에 따라 다양하게 작성되는 XQuery 질의들은 정제되어 있지 않을 수 있다. 질의의 불필요한 연산이나 표현을 제거하여 간결하게 만드는 것은 질의를 효율적으로 처리하게 하여 성능을 향상시키는데 도움을 준다. 이에 대한 이전의 연구들은 XML 데이터의 저장구조나 시스템에 의존적인 질의 정제방법을 사용하므로 이들 방법을 일반적인 XQuery 질의 정제로 볼 수는 없다. 그러나 우리의 정제방법은 XQuery 질의를 기반으로 하여 일반적인 상황에서도 질의의 정제가 가능하므로 XQuery를 입력으로 하는 다른 시스템에서 우리의 방법으로 입력 질의를 정제하여 효율적으로 질의를 처리할 수 있다. 본 논문에서는 XQuery 질의를 효율적으로 처리하기 위하여 두가지 정제방법을 제안한다. 첫째는 불필요한 연산이나 표현을 제거하는 방법이고, 둘째는 질의의 순서를 재배치하는 방법이다. 이 방법들을 통하여 질의를 보다 빠르고 효율적으로 처리하도록 한다. 끝으로, 우리는 성능평가를 통하여 우리의 정제방법의 효율성을 입증한다.