• Journal of Korean Society of Environmental Engineers
• /
• v.36 no.8
• /
• pp.554-560
• /
• 2014

To investigate the applicability of montmorillonite to capping material for the remediation of contaminated marine sediment, adsorption characteristics of $PO{_4}{^{3-}}$ onto montmorillonite were studied in a batch system with respect to changes in contact time, initial concentration, pH, adsorbent dose amount, competing anions, adsorbent mixture, and seawater. Sorption equilibrium reached in 1 h at 50 mg/L but 3 h was required to reach sorption equilibrium at 300 mg/L. Freundlich model was more suitable to describe equilibrium sorption data than Langmuir model. The $PO{_4}{^{3-}}$ adsorption decreased as pH increased, due to the $PO{_4}{^{3-}}$ competition for favorable adsorption site with OH- at higher pH. The presence of anions such as nitrate, sulfate, and bicarbonate had no significant effect on the $PO{_4}{^{3-}}$ adsorption onto the montmorillonite. The use of the montmorillonite alone was more effective for the removal of the $PO{_4}{^{3-}}$ than mixing the montmorillonite with red mud and steel slag. The $PO{_4}{^{3-}}$ adsorption capacity of the montmorillonite was higher in seawater than deionized water, resulting from the presence of calcium ion in seawater. The water tank elution experiments showed that montmorillonite capping blocked well the elution of $PO{_4}{^{3-}}$, which was not measured up to 14 days. It was concluded that the montmirillonite has a potential capping material for the removal of the $PO{_4}{^{3-}}$ from the aqueous solutions.

• Journal of Acupuncture Research
• /
• v.23 no.4
• /
• pp.39-47
• /
• 2006

Objectives : The following study was undertaken in order to seek the acupuncture operation method of ${\ll}$Sang Han Lun(傷寒論)${\gg}$ Liu- Jing-Bian-Zheng(六經辯誇). Methods : Based on tile documents quoted in ${\ll}$Sang Hang Za Bing Lun Xu Wen(傷寒雜病論 序文)${\gg}$ of 'Zhang, Zhong-Jing(張仲景)', the relativity of the theory of Jing-Mai(經脈) and Liu-Jing-Bian-Zheng of convalescence, and from the Liu-Jing-Bing(六經病), the origin and implication that caused Jue-yin-Bing(厥陰病) to form was studied on the basis of acupuncture medicine publications and e commentary writing of ${\ll}$Sang Han Lun${\gg}$. Results : 1. ${\ll}$Sang Han Lun${\gg}$ Liu-Jing-Bian-Zheng has succeeded and was developed based on Liu-Jing-Fen-Zheng(六經分證) of ${\ll}$Su Wen Re Lun(素問 熱論)${\gg}$. In addition, the summary of Liu-Jing-Bing became the general pnnciple of Fen-Jing(分經) and Ding-Zheng(定證) that may be applicable to Fenghan(風寒), Wenre(溫熱), Lili(疫癩) and Eating(雜病). 2. Most commentators of ${\ll}$Sang Han Lun${\gg}$ in the Song, Ming and Ching Dynasties of ${\ll}$Sang Han Lun${\gg}$ interpreted the Jue-Yin-Bing in physiological and pathological aspects of Rong-Wei(榮衛) as the disease of the Sim Po and Liver meridian. 3. From the Liu-Jing-Bing of ${\ll}$Sang Han Lun${\gg}$, the region of acupuncture treaaent of Jue-Yin-Bing is treated with the needle from the point of view of Bing-fheng-Lun-fhi(辨證論治) with the basis of the important region of acupuncture of the Sim Po of meridian and Liver of meridian.

• Journal of Acupuncture Research
• /
• v.24 no.3
• /
• pp.119-126
• /
• 2007

Objectives: The following study was undertaken in order to seek the acupuncture operation method of ${\ll}$Sang Han Lun(傷寒論)${\gg}$ Liu-Jing-Bian-Zheng(六經辯證). Methods: Based on the documents quoted in ${\ll}$Sang Han Za Bing Lun ${\cdot}$ Xu Wen(傷寒雜病論 ${\cdot}$ 序文)${\gg}$ of "Zhang, Zhong-Jing(張仲景)", the relativity of the theory of Jing-Mai(經脈) and Liu-Jing-Bian-Zheng of convalescence, and from the Liu-Jing-Bing(六經病), the origin and implication that caused So-Yang-Bing(少陽病) to form was studied on the basis of acupuncture medicine publications and the commentary writing of ${\ll}$Sang Han Lun${\gg}$. Results: 1. ${\ll}$Sang Han Lun${\gg}$ Liu-Jing-Bian-Zheng has succeeded and was developed based on Liu-Jing-Fen-Zheng(六經分證) of ${\ll}$ Su Wen ${\cdot}$ Re Lun(素問 ${\cdot}$ 熱論)${\gg}$. In addition, the summary of Liu-Jing-Bing became the general principle of Fen-Jing(分經) and Ding-Zheng(定證) that may be applicable to Fenghan(風寒), Wenre(溫熱), Lili and Zabing(雜病). 2. Most commentators of $\ll$Sang Han Lun$\gg$ in the Song, Ming and Ching Dynasties of ${\ll}$Sang Han Lun${\gg}$interpreted the So-Yang-Bing in physiological and pathological aspects of Rong-Wei(榮衛) as the disease of the bladder meridian that oversees the skin of the human body. 3. From the Liu-Jing-Bing of ${\ll}$Sang Han Lun${\gg}$, the region of acupuncture treatment of So-Yang-Bing is treated with the needle from the point of view of bing-Zheng-Lun-Zhi(辯證論治) with the basis of the important region of acupuncture of the Triple Energizer meridian and Gallbladder of meridian.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.16 no.2
• /
• pp.82-87
• /
• 2006

Glassy specimen was obtained by melting and quenching a borosilicate glass frit miked with $10{\sim}80wt%$ EAF dust. The glass transition temperature, $T_g$ of glassy specimen was measured around $550^{\circ}C$ from the DTA curve and the eat treatment condition to crystallize a glassy specimen was selected as $700^{\circ}C$/1 hr. The spinel crystal peaks were found in XRD analysis for the glass containing dust > 70 wt%. For the glass-ceramics, however, the spinel peaks in a specimen containing dust > 40 wt%, and the spinel and willemite peaks in dust > 80 wt%. The crystals of several tens of nanometer with aspect ratio of $0.7{\sim}1.0$ were observed at a glassy specimen containing dust > 40 wt% by SEM which was not found by XRD analysis. For the glass-ceramics, the crystals were found in a specimen containing dust of even 10 wt% by SEM. The feature and distribution of crystals observed through the specimen for a glass-ceramics were diverse and not uniform. The crystals found in the glass-ceramics containing 70 wt% dust were hexahedral with an aspect ratio of around unity.

• Journal of Soil and Groundwater Environment
• /
• v.16 no.4
• /
• pp.1-9
• /
• 2011

Bentonite has been generally used as vertical cutoff barrier material and reported to have several problems regarding its low workability, drying shrinkage cracking by particle cohesion, and ineffective waterproof ability under sea water condition. In this study, the particle sealant, the furnace slag coated by the mixture of bentonite, sepiolite and guargum, was developed to compensate these weak points and the hydraulic conductivity of the particle sealant was evaluated. Drying shrinkage cracking and swelling index was estimated to find the optimal mixing ratio of bentonite, sepiolite and guargum. The hydraulic conductivity of the particle sealants having different amount of sealant (bentonite-sepioliteguargum mixture) coating the furnace slag was estimated using the rigid wall permeameter and flexible wall permeameter. The results showed that drying shrinkage cracking was not found in the bentonite-sepiolite mixture with 20% sepiolite contents and the results from free swelling tests for the sealant having 1 : 0.025, 1 : 0.05 and 1 : 0.075 of weight ratios of bentonite-sepiolite mixture and guargum under simulated sea water condition were higher than those for the bentonitesepiolite mixture without guargum under tap water condition. These three sealants were coated on the furnace slag with 50% and 60% of sealant in the particle sealant and the hydraulic conductivity was estimated. In the cases of the particle sealants having 20% sepiolite in the bentonite-sepiolite mixture and 1 : 0.075 weight ratio of the bentonite-sepiolite mixture and guargum, the hydraulic conductivity from the rigid wall permeameter was below $1.0{\times}10^{-7}$ cm/sec under simulated sea water condition. The hydraulic conductivity of the particle sealant having $1.0{\times}10^{-6}$~$1.0{\times}10^{-7}$ cm/sec by the rigid wall permeameter was estimated using the flexible wall permeameter and found to be below $1.0{\times}10^{-7}$ cm/sec.

• Resources Recycling
• /
• v.22 no.1
• /
• pp.64-71
• /
• 2013

Mineral carbonation has been proposed as a possible way for $CO_2$ sequestration. The electric arc furnace slags consist of calcium, magnesium and aluminum silicates in various combinations. If they could be used instead of natural mineral silicates for carbonation, considerable energy savings and $CO_2$ emissions reductions could be achieved. Indirect aqueous carbonation of the slags consists of two steps, extraction of calcium and carbonation. Acetic acid leaching of electric arc furnace slags had been already studied to extract Ca in them, but it was reported that the carbonation of the extracted $Ca^{2+}$ in the leached solution would suffer from too slow kinetics, even at high pressure of $CO_2$. In this work, to develop more efficient extraction of the electric arc furnace slags, hydrochloric acid leaching to separate calcium from them was studied, and the results were compared with the acetic acid ones. The phase boundary between $Ca^{2+}$ and $CaCO_3$ in the solution with pH was determined by thermodynamic calculations. Hydrochloric acid was more effective than acetic acid for the extraction of Ca in electric arc furnace slag, and there is a possibility to recycle an unreacted hydrochloric acid in the leached solution by electrolysis or evaporation.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.23 no.2
• /
• pp.164-168
• /
• 2013

Objectives: This study was aimed at the examination of the lead exposure status of smelting process workers in steelmaking using scrap iron. Methods: The study was conducted from July to September 2012 by means of measurements taken during the smelting process, with 45 minutes set for a one-time smelting work cycle when it comes to personal air sample and area air sample. As such, daily work hours were classified into 360 minutes for measurement. The analysis of lead concentration was conducted using AAs based on the NIOSH 7300 method. Results: In the case of the personal specimens that were subjected to periodical measurement 45 minutes per one session during the smelting process, 40 out of 42 specimens measured were found to contain lead, with an average concentration level of $0.028mg/m^3$ (Max: $0.182mg/m^3$, Min: $0.005mg/m^3$, TWA-more than 50%: 4 out of 6 units). In the case of regional specimens, lead was detected in 45 out of 48 specimens measured, with an average concentration level of $0.037mg/m^3$ (Max: $0.220mg/m^3$, Min: $0.007mg/m^3$ ). In the case of regional specimens subjected to measurement using a day as the work cycle, lead was detected in 15 out of 15 specimens measured, with an average concentration level of $0.049mg/m^3$ (Max: $0.478mg/m^3$, Min: $0.005mg/m^3$ ). Conclusions: It concluded that smelting process workers in steelmaking are exposed to lead because scrap iron is used as a raw material. It is thus necessary to introduce legal management to prevent occupation-related disease in smelting process workers in steelmaking.

• Korean Journal of Soil Science and Fertilizer
• /
• v.45 no.6
• /
• pp.961-967
• /
• 2012

There have been many studies about efficiency of amendments for heavy metal stabilization through chemical assessment. The objective of this study was to evaluate the efficiency of several soil amendments (lime, agric-lime, dolomite, steel slag, fly ash and acid mine drainage sludge) on heavy metals stabilization through not only chemical but also biological assessments (phytotoxicity test) in abandoned mining area soil. In order to achieve the goal, we conducted preliminary screening experiment targeting 12 types of crop plants such as radish, young radish, chinese cabbage, winter grown cabbage, cabbage, bok choy, chicory, crown daisy, carrot, chives, spinach, and spring onion. The results of inhibition rates of early plant growth in metal-contaminated soil against non-contaminated soil and the correlations between inhibitions items showed that the bok choy was appropriate specie with respect to confirm the effect of several amendments. Several amendment treatments on contaminated soil brought about the changes in the root and shoot elongation of bok choy after 1 week. Agric-lime, dolomite and steel slag treatments showed the great efficiency of reducing on mobility of heavy metals using chemical assessment. But in contrary, these treatments resulted in the reduction of root and shoot elongation and only AMD sludge increased that of elongation, significantly. When considering both chemical and biological assessments, AMD sludge could be recommended the compatible amendment for target contaminated soil. In conclusion, biological assessment was also important aspect of decision of successful soil remediation.

• Journal of Conservation Science
• /
• v.30 no.2
• /
• pp.111-122
• /
• 2014

In Bongseon-ri site, the central type and the local type of the Baekje tombs co-exist together. Many swords with ring pommel which to regional leaders in Seocheon the Beekje government granted are excavated from these tombs. These represent that the regional leaders were controlled by the Baekje government gradually. Four swords with ring pommel and one simple sword are investigated metallurgically and we seek what swords have a function of weapon or what sword produce for grave goods. The simple sword is made by solid carburizing technology and quenching of heat treatment so it's possibly used as a weapon. In contrast, four swords with ring pommel has little chance of weapon because the blade of swords consists of microstructure that have low hardness and the back of swords don't have microstructure can absorb the shock. The most identical characteristic of the simple sword and swords with ring pommel is that they are possible to classify clearly into practical/non-practical tools. Additionally, according to non-metallic inclusion analysis result of these swords, w$\ddot{u}$stite and glass phase are found together. Thus, it is able to say that reduction method in low temperature is applied during smelting process.

• Journal of Conservation Science
• /
• v.36 no.3
• /
• pp.197-212
• /
• 2020

This study analyzed the microstructure of ring-pommel swords, excavated from Ancient Tombs, Hadae, Ulsan and examined their production technique, using non-destructive testing and a metallurgical method. The results confirmed that the five ring-pommel swords, unearthed in Ancient Tombs, Hadae, Ulsan, as identified by radiographic non-destructive testing, had been solely manufactured using iron, through forging based on the single-piece technique. Furthermore, these results were compared with previous studies, and the manufacturing techniques of single-piece ring-pommel swords were categorized into three types: pure iron - changing the shape, pure iron - changing the shape - carburization, and steel - changing the shape - quenching. The ring-pommels of four swords had around 0.7% of carbon content, which is as much as for eutectoid steel and higher than for other parts of these swords, such as the backs of their blades and handles. The weapon function of a small ring-pommel sword, under 60cm in length, was maximized by quenching focusing on its blade. Conversely, the martensite quenching structure was not observed in four ring-pommel swords shorter than 75cm. In other words, the same types of single-piece ring-pommel swords(late in 2C~early in 4C) were unearthed from Ancient Tombs, Hadae, and the group who has manufactured these swords is presumed to have limited their effectiveness, functionally depending on purposes, through an iron-making process and heat-treatment techniques.