• Journal of Korean Society of Transportation
• /
• v.33 no.3
• /
• pp.284-293
• /
• 2015

The objective of this paper is to determine the conditions of road surface by utilizing the images collected from closed-circuit television (CCTV) cameras installed on roadside. First, a technique was examined to detect wet surfaces at nighttime. From the literature reviews, it was revealed that image processing using polarization is one of the preferred options. However, it is hard to use the polarization characteristics of road surface images at nighttime because of irregular or no light situations. In this study, we proposes a new discriminant for detecting wet and dry road surfaces using CCTV image data at night. To detect the road surface conditions with night vision, we applied the wavelet packet transform for analyzing road surface textures. Additionally, to apply the luminance feature of night CCTV images, we set the intensity histogram based on HSI(Hue Saturation Intensity) color model. With a set of 200 images taken from the field, we constructed a detection criteria hyperplane with SVM (Support Vector Machine). We conducted field tests to verify the detection ability of the wet road surfaces and obtained reliable results. The outcome of this study is also expected to be used for monitoring road surfaces to improve safety.

• International Journal of Highway Engineering
• /
• v.14 no.1
• /
• pp.9-16
• /
• 2012

The performance of road markings is classified into the visibility at daytime, night time, wet condition and rainy conditions. The objective of this study is to obtain the driving safety of drivers under conditions of unstable weather condition such as the rain. The visibility of road markings is closely related to the preview time and detection distances and the ways to improve road marking materials and increase the dry retroreflectivity and wet retroreflectivity, which are the measures of daytime and nighttime visibility is researched to decrease the traffic accidents. For this purpose, Road marking glass beads with the refraction rate of 1.5 and 2.2 are introduced to raise the retroreflectivity. After investigating the minimum threshold retroreflectivity and Install Minimum retroreflectivity at home and abroad, minimum control values for the roadmarking visibility and improvement of nightime rainy retroreflectivity are suggested by physical properties and retroreflectivity experiments.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.12 no.5
• /
• pp.1-12
• /
• 2013

Road's accidents caused by Ice, snow, Wet of roads surface conditions and weather conditions situations that are constantly occurring. That is, driver's negligence and safe driving ability of individuals due to lack of awareness, and Road management main agent(the government and the public, etc.) due to road conditions, if there is insufficient information. So Related research needs is a trend that is required. In this study, gather Camera(Stereo camera)'s image data, and analysis polarization coefficients and wavelet transform. And unlike traditional single-dimensional classification algorithms as multi-dimensional analysis by using SVM classification techniques, develop an algorithm to determine road conditions. Four on the road conditions (dry, wet, snow, ice) recognition success rate for the detection and analysis of experiments.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.5
• /
• pp.213-220
• /
• 2016

In order to drive on road safely, the type of road design and construction is basically needed to optimize driver's safety and vehicle performance. Although the heavy traffic highways were built by reflecting these factors, the national highways and local roads have still taken a lot of problems. In this study, we analyzed the behavior characteristics of a vehicle according to the speed variation of the vehicle using the PC-Crash program for the traffic accidents reconfiguration at GULUN interchange located Hongcheon in Gangwon Province. the conditions outlet surface of the road for analysis were dry road surface, wet road surface and icy road surface. As a result, we identified the fact that the friction coefficient of road surface and the speed of vehicle affected to vehicle behavior characteristics of outlet shape in GULUN interchange, and showed the possibility that we can verify a problem about road design through to this simulation in advance.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.9 no.6
• /
• pp.54-62
• /
• 2010

The scientific analysis of car-pedestrian accidents is not an easy task because of the characteristic of the accidents itself. Since the analysis involved human being, there were few experimental data that could be used for the analysis. The coefficient of friction of human body was the one of crucial data for accident analysis, but no field experiment report was available for various roadway conditions. This study intends to measure the coefficient of friction of human body through field studies. Results showed that the coefficient of friction of human body for dry asphalt pavement conditions was 0.59~0.62, and for dry concrete pavement conditions was 0.59~0.61. In addition, the coefficients for wet asphalt pavement and for wet concrete pavement conditions were 0.56~0.59 and 0.51~0.54 respectively, indicating 5.0% and 8.3% reduction compared to the dry conditions. The deduced coefficients were validated using the simulation program. It has been confirmed that the experiment values were close to the simulation results.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.12
• /
• pp.1-8
• /
• 2017

This paper presents the development of an adaptive cruise control (ACC) system, which is one of the typical advanced driver assist systems, for 4-wheel drive hybrid in-wheel electric vehicles. The front wheels of the vehicle are driven by a combustion engine, while its rear wheels are driven by in-wheel motors. This paper proposes an adaptive cruise control system which takes advantage of the unique driveline configuration presented herein, while the proposed power distribution algorithm guarantees its tracking performance and fuel efficiency at the same time. With the proposed algorithm, the vehicle is driven only by the engine in normal situations, while the in-wheel motors are used to distribute the power to the rear wheels if the tracking performance decreases. This paper also presents the modeling of the in-wheel motors, hybrid in-wheel driveline, and integrated ACC control system based on a commercial high-precision vehicle dynamics model. The simulation results obtained with the model are presented to confirm the performance of the proposed algorithm.