• Transactions of the Korean Society of Automotive Engineers
• /
• v.21 no.3
• /
• pp.82-87
• /
• 2013

In this work, the 1L grade integrated metal DOC/DPF filter that can install in engine manifold position was developed to investigate the effect of platinum-coating amount of filter on the improvement of filter activation temperature and reduction of particulate matter (PM). This filter was installed in 2.9L CI engine which meets the EURO-4 emission regulation. Tests for PM reduction efficiency of filter were conducted under ND-13 mode with full-load test condition. It was revealed that the time to reach the activation temperature of metal filter ($280^{\circ}C$) was shorter as the amount of platinum-coating increased. This short activation time can be helpful for the reduction of CO and HC emissions during cold start condition. At the same time, PM reduced as the coating amount increased. The reduction percentage of $DOC_{40}$, $DOC_{20}$, and $DOC_0$ were 96.7% (2.34 mg/kW'h), 95.1% (3.47 mg/kW'h), and 94.5% (3.69 mg/kW'h) compared to previous result (71.4 mg/kW'h), respectively.

• Science of Emotion and Sensibility
• /
• v.14 no.4
• /
• pp.617-626
• /
• 2011

Home appliance proposes the experience of new lifestyle to consumers, together with digital technology-applied highly advanced functions, beyond its natural quality like the basic function of reducing the burden of housework. However, under the current circumstances that populations are rapidly aging, the number of elderly consumers, who feel it inconvenient to smoothly use even the basic function of home appliance, is increasing in proportion to populations. Therefore, the necessity for developing home appliance with improved usability in consideration of the elderly is rising up. This study analyzed the elderly's pattern of using home appliance and illustrated the procedure of their using home appliance, putting its focus on the home appliance that the elderly highly depend on in keeping their daily life and that they feel it inconvenient to control. And based on the illustrated procedure, this paper substituted various kinds of home appliance that were not surveyed by this study and found out 4 user behavioral models for home appliance. Same as the concept of universal design, product designs, which are convenient to use by the elderly whose physical functions are reduced, are expected acceptable to various user classes. The found user behavioral models purport to give references to design process for product planning and design solutions.

• Science of Emotion and Sensibility
• /
• v.13 no.2
• /
• pp.347-358
• /
• 2010

As life gets richer along with social development, the interest in composure of life and in quality of life gets higher. According to this, a concept on bathroom, which had been simply physiological sanitary space before, is being gradually changed, thereby being reborn as space of charging vitality of life and of realizing own desire. As these consumers' new desire is emerged, it is being highlighted the behavior of being made in space now called 'bathroom', the requirements for this space, and the interest in what aims to be pursued. However, current Korean people have different bathroom behavior such as using outside bathtub or filling a washbasin with water unlike the center on stand-up shower in the West, thereby having inconvenience. Accordingly, when bathroom is designed that reflects Korean people's bathroom behavior, the satisfaction with using bathroom will be able to be enhanced. This study aims to increase the use satisfaction with bathroom space, to survey Korean people's situations of using bathroom, the inconvenience in using, and the general emotion, and to elicit requirements for bathroom users and basic design guidelines available for reflecting the health in planning bathroom space, the space of solving sanitary problem, and the modern people's physical features and lifestyle.

• The Journal of the Korea Contents Association
• /
• v.14 no.7
• /
• pp.29-44
• /
• 2014

To provide context aware service, certain phenomena and situation information of the user should be detecting and monitoring using sensors. But, the sensor data has heterogeneity about system, syntax, structure, and semantics. So, it is difficult to apply to various services. To solve this issue, we should remove these heterogeneities and convert to context information that is easy to provide context aware services. Also, the existing context aware service mash-up environment require relevant sensor type, criteria of context, programing ability to define the service situation. So, it is difficult to create service for a non-technical user. Therefore, we propose ontology based user-centric service environment to provide context aware IoT services. It provide context awareness and user-desired services using data that acquired via IoT paradigm. The proposed environment consist of the ontology based semantic sensor data processing and the user-centric service environment. It provide convert the object data to the context information and service mash-up process to create user service in easy way.

• Korean Journal of Medicinal Crop Science
• /
• v.11 no.5
• /
• pp.347-351
• /
• 2003

This experiment was carried out to study the optimal chilling period for breaking the physiological dormancy of dehisced E. senticosus seeds and to investigate the critical seeding date in Kangwondo. Storage at $5^{\circ}C$ for 85 days was most effective in breaking dormancy of dehisced seeds, but didn't germinated synchronously. Only 28.1% of undehisced seeds germinated after 125 days of low temperature storage. For improving seedling survival rate in the field, 50% shading was more effective than 30% shading. Delayed seeding date resulted in decreased seedling fresh weight, dry weight, leaf area and root length, but seeding date has no significant affecte on stem length.

• Convergence Security Journal
• /
• v.19 no.4
• /
• pp.43-53
• /
• 2019

Recently, a number of military intranet infiltrations suspected of North Korea have been discovered. There was a problem that a vulnerability could occur due to the modification of user authentication data that can access existing military information systems. In this paper, we applied mutual verification technique and API (Application Programming Interface) forgery / forgery blocking and obfuscation to solve the authentication weakness in web browsers that comply with FIDO (Fast IDentity Online) standard. In addition, user convenience is improved by implementing No-Plugin that does not require separate program installation. Performance tests show that most browsers perform about 0.1ms based on the RSA key generation rate. In addition, it proved that it can be used for commercialization by showing performance of less than 0.1 second even in the digital signature verification speed of the server. The service is expected to be useful for improving military information system security as an alternative to browser authentication by building a web secure storage.

• Journal of Korea Fair Competition Federation
• /
• no.113
• /
• pp.15-31
• /
• 2005

최근 미국의 법원은 담합을 입증하려는 시도를 주로 경제적 증거에 입각하여 분석하는 추세를 보여 왔다. 하지만 담합의 존재를 입증하는데 있어서 경제분석의 역할에도 많은 이견이 날카롭게 표출되었다. 담합의 존재에 관한 경제적 증거를 분석하는 데에 있어 유일한 합리적 근거는 최신과점이론(Modern oligopoly theory)이다. 그런데 증인으로 나선 많은 경제학자들과 법원이 최신과점이론에 자신들의 분석을 뚜렷이 기초하지 않았기 때문에, 판례법의 현 상태가 불만족스럽다고 주장하는 것이 본 논문의 핵심적 내용이다. 셔먼법 제1조는 ''계약, 결합, 공모(contract, combination, or conspiracy)에 의해 초래되는 거래(즉 경쟁)의 불합리한 제한을 규제''하는데, 이러한 계약 결합, 공모의''용어들은 합의라는 하나의 개념으로 통합하여 이해''할 수 있다. 제 1조는 다수의 당사자가 ''단일한 목적, 공통된 의도와 의견의 일치, 혹은 의사의 합치(Meeting of minds)'', 즉 ''공통된 계획에 대한 의식적 참가(consious commitment to a common scheme)''를 합의한 모든 협약을 규제한다. 셔먼법 제 1조 위반을 입증하기 위해서는 일치된 행동이 합의 하에서 일어났음을 입증해야 한다. 미국 법원은 합의를 추론할 수 있는 증거력 있는 정황증거(admissible circumstantial evidence)의 원칙을 확립하였다. 독점가격에 가까운 수준의 과점가격 설정은 ''조정되었다(coordinated)''라고 칭해지는데, 이는 ''구두 합의''와 ''암묵적 합의''의 두 가지 형태로 나뉜다. 한편, 일회게임 과점 모형과 반복게임 모형은 과점이론의 핵심을 이룬다. 과점에 대한 Chamberlin의 견해는 본래 게임과 Stigler의 모형은 그와 같은 생각의 오류를 가르쳤다. 그러나 판례법은, Petroleum products antitrust litigation사건과 reserve supply사건에서 볼 수 있듯이 종종 그러한 교훈을 망각했다. 최신과정이론과 판례를 종합해 보면, 합의의 존재에 관해 경제학자가 이끌어내는 추론과 법원이 이끌어내는 추론을 포괄하는 다음의 네 가지 일반적 원칙이 도출된다. 1. 합의가 추론되기 위해서는 상호의존성을 넘는 무언가가 먼저 제시되어야 한다. 2. 합의의 존재는 일회게임 과점 모형에서의 비협조적 내쉬균형과 일치하는 행동으로부터는 추론될 수 없다. 3. 합의의 존재는, 비록 무한반복 과점게임에서의 비협조적 내쉬균형(혹은 Chamberlin-Fellner식의 과점)과 일치하더라도, 일회게임 과점 모형에서의 비협조적 내쉬균형과 일치하지 않는 행동으로부터 추론될 수 있다. 4. 증거는 구두합의의 존재를 뒷받침해야만 한다. 이러한 원칙에서 얻을 수 있는 가장 중요한 교훈은, 합의가 존재하지 않을 경우 과점상황으로부터는 독점가격이 예상될 수 없다는 사실을 법원이 인식하는 것만으로도 합의의 추론에서 범하기 쉬운 가장 큰 오류를 회피할 수 있다는 것이다.

• Journal of Broadcast Engineering
• /
• v.17 no.5
• /
• pp.789-807
• /
• 2012

The purpose of this paper is to find various disparity factors in conjunction with situations and contexts of the contents that cause viewer's discomfort, which is to make a content production guideline for viewer's safety, eventually. As a methodology, we extract the experimental data by letting various viewers push a pre-defined key as long as they feel discomfort during watching stereo 3D contents. For each contents, we extract the disparities and disparity changes for the focal point, vicinity of the focal point (ROI, region of interest), and the whole image. For each contents, each point or part of contents is analyzed to find the factors causing discomfort with the two prepared data with watching the contents in 3D. Then, all the analyzed data are re-analyzed to find the strength of each factor. The results from the analyses are explained from the factors having relatively high strength first. It includes the factors that are not known as well as the ones that we can already guess.

• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.2
• /
• pp.223-230
• /
• 2013

When a new nuclear fuel is developed, an irradiation test needs to be carried out in the research reactor to analyze the performance of the new nuclear fuel. In order to check the performance of a nuclear fuel during the irradiation test in the test loop of a research reactor, sensors need to be attached in and out of the fuel rod and connect them with instrumentation cables to the measuring device located outside of the reactor pool. In particular, to check the temporary temperature change at the center of a nuclear fuel during the irradiation test, a thermocouple should be instrumented at the center of the fuel rod. Therefore, a hole needs to be made at the center of fuel pellet to put in the thermocouple. However, because the hardness and the density of a sintered $UO_2$ pellet are very high, it is difficult to make a small fine hole on a sintered $UO_2$ pellet using a simple drilling machine even though we use a diamond drill bit made by electro deposition. In this study, an automated drilling machine using a CVD diamond drill has been developed to make a fine hole in a fuel pellet without changing tools or breakage of workpiece. A sintered alumina ($Al_2O_3$) block which has a higher hardness than a sintered $UO_2$ pellet is used as a test specimen. Then, it is verified that a precise hole can be drilled off without breakage of the drill bit in a short time.

• Journal of Power System Engineering
• /
• v.12 no.6
• /
• pp.42-49
• /
• 2008

The most important job in the container terminal area is to handle the cargo effectively in the limited time. To achieve this object, many strategies have been introduced and applied to. If we consider the automated container terminal, it is necessary that the cargo handling equipments are equipped with more intelligent control systems. From the middle of the 1990's, an automated rail-mounted gantry crane(RMGC) and rubber-tired gantry crane(RTG) have been developed and widely used to handle containers in the yards. Recently, in these cranes, the many equipments like CCD cameras and sensors are mounted to cope with the automated terminal environment. In this paper, we try to support the development of more intelligent automated cranes which make the cargo handling be performed effectively in the yards. For this plant, the modelling, tracking control, anti-sway system design, skew motion suppressing and complicated motion control and suppressing problems must be considered. Especially, in this paper, the system modelling and tracking control approach are discussed. And, we design the tracking control system incorporating an observer based on the 2DOF servo system design approach to obtain the desired state informations. In the case of observer design, a weighted $H_{\infty}$ error bound approach for a state estimator is considered. Based on an algebraic Riccati equation(inequality) approach, a necessary and sufficient condition for the existence of a full-order estimator which satisfies the weighted $H_{\infty}$ error bound is introduced. Where, the condition for existence of the estimator is denoted by a Linear Matrix Inequality(LMI) which gives an optimized solution and observer gain. Based on this result, we apply it to the tracking control system design for the transfer crane.