• Journal of the Korean Institute of Gas
• /
• v.19 no.6
• /
• pp.105-109
• /
• 2015

In this paper is proposed for the oil return device developed to perform efficient emergency operation in the event the sea oil spill. Oil recovery apparatus for spilled oil on marine aims to quickly purged with high recovery. Oil recovery apparatus can prevent secondary pollution which may occur in the purification method using the adhesion agent and chemicals. Also it has excellent properties oil recovery. Adopted by the vapor explosion-proof mechanism to remove the risks that may occur during oil recovery operations.

• Journal of Food Hygiene and Safety
• /
• v.3 no.4
• /
• pp.203-209
• /
• 1988

This study was performed to develop the simple and rapid determination method of preservatives in Yogurt and Soybean.sauce. 1. The analytical method by HPLC system was as follow: The sample was diluted, centrifuged, filtered, if necessary, and analyzed by HPLC system with UV detector. 2. The analytical method by GLC system was as follow: The sample was extracted directly with ether, added cone. sulfuric acid to destroy emulsion and analyzed by the GLC system with FID. 3. The recovery rates of preservatives by the above methods were higher than 99.0 %. 4. Total running time for the above methods was less than 50 minutes. Especially, the running time for dilution method by HPLC system was one-third of that for GLC method.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.10
• /
• pp.27-33
• /
• 2019

The aviation industry has grown beyond the simple processing and assembling of aircraft parts and now designs and exports finished aircraft. In this study, the vertical CNC milling rotational speed and feed rate were parameters to investigate the life of tools according to their shape: (flat, round, and ball end mill) in the rough cutting of titanium. These tools are widely used in aircraft manufacturing and assembly. The purpose of this study is to measure the cutting temperature generated during the cutting process and calculate the rate of tool wear. This will be accomplished by measuring the tool weight before and after cutting the specimen and to compare it with the results of previous studies. Our study showed that the maximum cutting temperature increased as cutting time, tool rotational speed, and feed rate increased. The highest cutting temperatures were recorded for the ball, round, and flat end mill, respectively. Tool wear for the ball, round, and flat end mill increased as the speed and feed rate increased. The flat end mill exhibited the highest rate of wear from a minimum of 0.62% to a maximum of 2.88%.

• Journal of Navigation and Port Research
• /
• v.40 no.6
• /
• pp.441-450
• /
• 2016

A pilot scale biostimulation experiment was performed under field conditions to degrade organic pollutants and PAHs (Polycyclic Aromatic Compounds) in contaminated coastal sediment. During the experiment, the seawater temperature around the sediment varied from $16.5^{\circ}C$ to $21^{\circ}C$, while the sediment pH was stable at 8.4-8.5. The experiment was conducted over a one year period with a control group and a sample group with a applied biostimulant composed of acetate, sulfate, and nitrate. Chemical oxygen demand decreased 39% in the control group and 79% in the sample group. Volatile solids were reduced from 15 to 7 g/kg in the control group and 2.5 g/kg in the sample group. Out of the 2-, 3- ,4- ,5-, and 6-rings of the 16 vital PAHs, the compound including naphthalene (2-ring), took 2 months to degrade completely, while the degradation efficiency was 55.6% in the control group during the same period. In the case of the 3-ring and 4-ring PAHs, complete degradation in the sample and 46% - 100% degradation in control was observed after one year of the experiment. The 5-ring and 6-ring PAHs were degraded to about 77%-100% in the sample group and 26%-87% in the control group during the one year of the experiment. The study results show that biostimulation is a very effective method to improve the degradation rate of organic pollutants and PAHs (Polycyclic Aromatic Compounds) in contaminated coastal sediment.

• KSBB Journal
• /
• v.23 no.4
• /
• pp.323-328
• /
• 2008

This study was accomplished using Anaerobic/Anoxic/Oxic biofilm reactors with fixed media and post-treatment reactor for natural purification with aquatic floating plants. The objectives of this study was to investigate the characteristics of organics, nitrogen and phosphorus removal from sewage with the HRT. The average removal efficiency of SS and $COD_{Cr}$ increases as increasing the hydraulic retention time (HRT) until 12 hr of the HRT, and it was constant over 12 hr of the HRT. The removal efficiency of them was about 93% and 89% respectively over the 12 hr of HRT. The average $BOD_5$ and $COD_{Mn}$ increases as increasing the HRT and the removal efficiency of them was 84.91 % and 76.03% respectively at the 26 hr of HRT. The removal efficiency of T-N and T-P increases as increasing the HRT until 61 hr of the HRT, and it was constant over 61 hr of the HRT. At the HRT of 61 hr, it was 70.20%, 77.86% respectively. It was found that the optimum HRT was 61 hr in case of the nutrients. Before and after experiment, the nitrogen content was similar in leaves of the water hyacinths but the nitrogen content in roots after experiment was 5.5% more than its content before experiment. It was known that the nitrogen was absorbed by the water hyacinths.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2004.04a
• /
• pp.153-157
• /
• 2004

다양한 혐기성 조건에서 다환방향족탄화수소(PAHs)로 오염된 토양의 미생물 분해 연구를 수행하였다. 대표적인 다환방향족탄화수소인 phenanthrene과 fluorene을 토양과 물에 오염시켜서 약 100일 동안 저감정도를 관찰하였고, 실제 다환방향족탄화수소로 오염된 현장 토양을 이용 혐기성하에서 다환방향족탄화수소의 생분해 가능성을 확인하였다. 미생물 접종원은 혐기성 조건에서 다환방향족탄화수소에 노출시킨 슬러리가 사용되었다. 황산염 환원조건, 질산염 환원조건, 메탄생성조건 등의 다양한 혐기성 조건에서 실험을 수행한 결과, 메탄생성조건 > 질산염 환원조건 > 황산염 환원조건의 순서로 분해가 잘 일어났다. 또한 현장오염토양의 경우 34일간 처리 후 메탄생성조건에서 최대 72%의 분해율을 보였다.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1995.04a
• /
• pp.106-110
• /
• 1995

Chloride ion is considered one of the most common culprits in the corrosion of steel in concrete. It breaks down the passive film and allows the steel to corrode actively at a high rate. The main objective of this study is to determine the critical chloride ion concentrations in the pore solutions and chloride binding effect of cement pastes made with and without fly ash. Cement pastes with water-ratio of 0.5 allowed to hydrate in sealed containers for 28 days and to express poresolution. T도 expressed pore fluids were analyzed for chloride and hydroxyl ion concentrations. It was found that the replaced cement with fly ash have little effect on Chloride binding capacity ratio.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.4
• /
• pp.704-708
• /
• 2006

This study was designed to investigate the effect of Fenton reaction and consecutive rhizosphere biodegradation on diesel-contaminated soil. According to the result, the TPH removal rate was increased with the concentration of hydrogen peroxide in Fenton's treatment and showed 83.5% for soybean, 81.5% for rice, and 76% for control in rhizosphere biodegradation.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2007.05a
• /
• pp.450-452
• /
• 2007

낙동강 중하류지역에 있어서 본류와 주요지천에 있어서의 환경특성과 식생현황을 조사하여 하천관리방안의 기초자료를 마련하고, 본류와 지류의 물리적 특성, 토지이용현황, 수질특성, 토양특성 및 식생 현황을 조사하였다. 조사결과 하천에서 육역으로 갈수록 귀화식물의 유입이 많았는데, 같은 하천이라도 회천의 경우 강가보다 제방부근이 더 높게 나타났고, 상대적으로 사람의 접근이 어려운 낙동강 본류의 매리나 물금지역이 낮게 나타나 귀화식물의 유입은 하천의 형태와 더불어 인간의 접근용이성에도 영향을 많이 받고 있음을 보여주었다. 조사 대상 지역 중 서낙동강 습지와 묵정논 등 습지에서 수생식물의 출현율이 높게 나타나, 이들 지역에 있어서 수생식물을 이용한 하천 수질정화에 있어서 습지의 조성 혹은 관리가 매우 유용할 수 있음을 보여주었다. 조사지역에서의 비소와 크롬의 경우 대부분의 지역에서 토양오염우려기준 이상으로 조사되어 이에 대한 대책이 시급한 것으로 나타났다. 현재와 같은 열약한 수변조건에서 강수시에 범람이나 침식으로 인하여 수체로 유입된 가능성이 매우 높은 것으로 판단되어지며 이를 방지하기 위한 수변녹지의 확보가 절실한 것으로 나타났다.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2004.03b
• /
• pp.469-474
• /
• 2004

본 연구는 유류로 오염된 지반을 개선하는데 초음파를 사용한다는 점에 초점을 둔다. 초음파의 원리는 고체의 재료가 음파의 좋은 전도체라는 사실에 근거를 두고 있다. 초음파에 의한 정화는 초음파의 적용에 의해 재료의 표면이 변화되고 그것에 의해 오염물질이 제거된다는 것을 의미한다. 본 연구에서는 초음파의 지속, 간극률, 초음파력, 입자의 크기와 유속율 같은 초음파 취급에 영향을 끼치는 요소들을 고려하여, 초음파를 쓴 것과 쓰지 않은 오염된 흙을 다룬 결과를 비교 분석하였다.