• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.5
• /
• pp.95-102
• /
• 2008

Typical household loads have nonlinear loads including a personal computer, video, refrigerator, microwave oven, TV, and audio set. These nonlinear loads generate harmonic currents and create distortions on the sinusoidal voltage of the power system. Harmonic field measurements have shown that the harmonic contents of a waveform varies with time. A cumulative probablistic approach is the most commonly used method to solve time varying harmonics. This paper provides in depth analysis on harmonics field measurement of the typical household loads for one year period and the survey is conducted with the objectives to identify the trends of harmonic distortion level present and indentify the future trends of metering in the presence of nonsinusoidal current and voltage waveforms in the system.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.16 no.5
• /
• pp.466-476
• /
• 2011

In this paper, a high-performance current control for the single-phase PWM converter under distorted source voltages is proposed using a composite observer. By applying the composite observer, the fundamental and high-order harmonic components of the source voltage and current are extracted without a delay. The extracted fundamental component is used for a phase-lock loop (PLL) system to detect the phase angle of the source voltage. A multi-PR (proportional-resonant) controller is employed to regulate the single-phase line current. The high-order harmonic components of the line current are easily eliminated, resulting in the sinusoidal line current. The simulation and experimental results have verified the validity of the proposed method.

• Proceedings of the KIPE Conference
• /
• 2008.10a
• /
• pp.25-28
• /
• 2008

본연구는 부스트형 대기압 플라즈마 전원장치에 대한 연구로서 부스트형 전원장치는 플라즈마의 발생을 원활하게 하기위해 커패시터로 모델링되는 부하단에 인가되는 전압을 직접 제어하는 방식을 의미한다. 기존의 정현파 공진형 전원장치는 PWM기법을 이용하여 펄스의 폭을 증감하는 방식으로 전압의 크기를 제어하지만 이 방식은 별도의 공진회로를 이용하여 공진을 일으킨 다음 이를 부하에 인가하는 방식으로 구성되기 때문에 속응성이 떨어지고 균일한 플라즈마를 발생시키기 어렵다. 부스트형 전원장치는 별도의 부스트 컨버터로 직류전압을 제어하여 부하단에 입력되는 전압을 직접 제어하므로 매우 균일한 플라즈마를 발생시킬 수 있는 이점이 있으나 별도의 부스트용 스위치가 필요하고 이로 인한 효율의 감소 및 사이즈의 증가가 되는 문제점이 생긴다. 본 연구에서는 커패시터로 모델링되는 부하를 이용하여 직접 공진을 일으키고 공진된 부하 전압을 직접 부스트 스위치에 인가시키는 방식으로 부스트용 스위치의 소프트 스위칭이 가능한 새로운 방식을 개발하였다. 개발된 방식에서는 부스트용 스위치가 ZCS형태로 켜지고 ZVS형태로 꺼지는 특성을 갖게 되므로 별도의 추가 회로 없이도 획기적인 효율 증가와 방열판 사이즈의 감소로 인한 제품의 경량화가 가능한 장점이 있다. 또한, DC링크 커패시터의 최소화로 인하여 부하단의 아크 문제가 자동적으로 해결되는 장점도 있다. 제안된 제어 방식은 시뮬레이션과 실험으로 그 타당성을 입증하였다.

• Proceedings of the KIPE Conference
• /
• 2014.07a
• /
• pp.118-119
• /
• 2014

왜곡된 역기전력을 갖는 매입형 영구자석동기전동기를 정현파 전류로 제어할 경우 역기전력의 왜곡으로 인해 발생하는 토크리플은 전동기의 진동, 소음, 효율 저하의 요인이 된다. 저속운전의 경우 토크리플을 상쇄할 수 있는 고조파전류를 인가하여 전류제어에 의해 토크리플을 줄일 수 있다. 그러나 고조파 전류제어에 의한 토크리플 저감은 전류제어기의 대역폭에 의해 전류제어 특성이 좌우되므로 고조파 보상전류의 주파수가 높은 경우 적절한 보상이 되지 않는다. 본 논문에서는 전동기의 고속운전 시 고조파 전류에 해당되는 고조파 전압을 보상함으로써 역기전력에 의한 토크리플을 저감한다. 제안된 토크리플 저감 알고리즘은 시뮬레이션을 통해 검증한다.

• Proceedings of the KIEE Conference
• /
• 2001.10a
• /
• pp.180-182
• /
• 2001

Input Current Correction of Single-Phase Buck Rectifier is studied in the paper. To sinusoidal waveform the input current with a near-unity power factor over a wide variety of operating conditions, the output capacitor is operated with voltage reversibility for the supply by arranging the auxiliary diode and power switching device. Then the output voltage is superposed on the input voltage during on time duration of power switching devices in order to minimize the input current distortion caused by the small input voltage when changing the polarity. The tested setup, using two insulated-gate bipolar transistors(IGBT) and a microcomputer, is implemented and IGBT are switched with 20[kHz], which is out of the audible band. Moreover, a rigorous state-space analysis is introduced to predict the operation of the rectifier. The simulated results confirm that the input current can be sinusoidal waveform with a near-unity power factor and a satisfactory output voltage regulation can be achieved.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.11
• /
• pp.117-124
• /
• 2004

Recently, nano-methodology is increasingly important as the ruler for measuring nano-technology, and we applied the linear encoder to nano-methodology. The quadrature output in the linear encoder has an effect on increasing the resolution in some techniques. Already, various interpolation techniques based on the quadrature signal have applied to the precision servo system. In this paper, we propose a new interpolation algorithm for ultra-precision positioning in the low speed with simulation by MATLAB SIMULINK. This method modified previous methods and was properly designed for some given control system. To verify, we first fulfilled the encoder signal test to find main parameters fer the signal transformation, then we proved the proposed interpolation algorithm by experiments, which show that the result of the interpolation algorithm corresponds with the measurement of the laser interferometer in 100 nm unit approximately. In addition, we can get more precise measurement by more accurate and noise-free signal. So we need to compensate imperfections in the encoder signal. After that, we will apply this algorithm to nano positioning system.

• Journal of the Korea Society of Computer and Information
• /
• v.6 no.4
• /
• pp.104-109
• /
• 2001

In this paper, we designed a 3D shape measuring system with high speed and high measurement resolution using line-shaped sine stripes of a LCD projector We proposed an effective method to improve measurement efficiency for a 3D shape measuring system by finding the deficient shape information areas and recovering the shape information efficiently. We experimentally confirmed the improvement of measurement efficiency. Deficient shape information areas can be inevitably existed in a acquired image caused by the camera view angle and surface shapes of an object. The measurement efficiency is turned out to be improved by extracting these shadow areas and recovering the shape information efficiently using both a variable rated normalization and a variable sized phase recovering windows.

• Journal of the Institute of Convergence Signal Processing
• /
• v.21 no.1
• /
• pp.7-12
• /
• 2020

Various parameters are used to measure anesthetic depth during surgery using brain waves, and in actual clinical use, the linear analysis SEF is widely used. However, with recent studies showing that biological signals including EEG, contain nonlinear properties interest in nonlinear analysis of brain signals is increasing and parameters based on these are being developed. In this study, we are going to develop a parameter that can measure EEG using the nonlinear analysis method and extract noise that can be mixed with external electronic equipment and EEG instrumentation by comparing it with the data from the bispectrum analysis of static waves.

• Journal of IKEEE
• /
• v.27 no.3
• /
• pp.296-302
• /
• 2023

As Multimedia industry has evolved, it has become possible to display resolutions in various formats. Therefore, the performance of a scaler algorithm that converts resolutions while maintaining high quality and its hardware implementation are important. Considering the hardware design of an image up/down scaler, this paper proposes a combinatorial scaler algorithm that uses modified bilinear interpolation in the vertical direction and bicubic interpolation in the horizontal direction to reduce the line memory burden. Through quantitative and qualitative evaluations, this paper compared the performance of the proposed algorithm with three other well-known algorithms, and also compared the hardware burden of its hardware implementation. This paper used a sinusoidal signal and eight typical images for performance evaluation.

• The Journal of the Acoustical Society of Korea
• /
• v.27 no.1
• /
• pp.33-39
• /
• 2008

Void fraction of air bubble in the seagrass bed by photosynthesis was estimated with sound speed dispersion. A field experiment was conducted at Seagrasss bed of which bottom type is sandy mud and 120 kHz CW waveform was transmitted to obtain backscattered signals from seagrass bed. The differences of the arrival time of received signal from seagrass bed were observed between day and night. The diurnal variation of arrival time was caused by sound speed dispersion of air bubble generated by photosynthesis of seagrass.