• Journal of Digital Convergence
• /
• v.16 no.3
• /
• pp.487-495
• /
• 2018

The purpose of this study is to diagnose problems of the permanent judge system by examining the cases of practical running of the permanent judge system, and to provide basic materials for the settlement of fair and transparent judge culture. The findings of the case studies are as follows. First, the difficulties in selection, allocation, and education of judges caused by the operation of the permanent judge system. The problems in allocation are forceful allocation, conflict over allocation with general judges. The problems in evaluation are individual evaluation and limits of fairness, lack of evaluation rules. Second, the unpredictability of whether the permanent judge system survive or not. Third, there are some environmental constraints of the permanent judge system. Lack of protective apparatus is lack of rescue method and solution for intentional protest. Forth, there is a problem of low recognition of the permanent judge system. As the federation has been not active in publicizing the permanent judge system, the system is not well known.

• Proceedings of the KIEE Conference
• /
• 1999.07b
• /
• pp.894-896
• /
• 1999

PID 제어는 50년의 역사를 갖기 때문에 현장의 사용자는 이 제어방식에 익숙해져 있으며, 제어장치의 구성이 간단하며 제어기의 최적동조가 가능하므로 많은 분야에서 사용되고 있다[1]. 그러나 PID 제어기에 의해서 얻은 결과에 대하여 만족하기 위해서는 많은 시행착오를 겪어야 한다. 또한 만족하는 결과를 얻었다고 할지라도 외란, 플랜트의 동특성이 바뀌는 경우 시스템을 추종하지 못하기 때문에 파라미터를 재조정하여야 한다. 유전 알고리즘은 자연세계의 진화 현상에 기초한 계산모델로서 John Holland에 의해서 1975년에 개발된 전역적인 최적화 알고리즘이며[1][2], 비선형 고차원, 불연속, 다중모드, 노이즈 함수 등에 대하여 강건함을 보여주고, 복잡한 탐색 공간에서 최적 값을 스스로 발견하는 학습 능력을 갖는다. 이 방법은 재생산, 교배, 돌연변이를 통하여 최적해를 찾은 방법으로 1989년에 D. E. Goldgerg에 의해서 체계적으로 정리된 후 여러 분야에서 응용되고 있다[3][4]. 그러나 유전 알고리즘은 목적함수만을 이용하여 해집단을 탐색하기 때문에 숙련운전자가 원하는 제어 특성 명세인 상승시간, 정착시간, 초과량(oveshoot) 둥을 구체적으로 명시하여 제어에 반영할 수 없다. 또한, 유전 알고리즘은 입력 값이 크게 바뀔 경우 다른 시스템으로 인식하여 새로운 탐색을 수행하는 단점을 가지고 있다. 본 논문은 첫째, 기준모델을 도입하여 플랜트의 성능을 기준모델로 표현하여 플랜트가 요구하는 성능지표를 정량적으로 규정하는 것이 가능하였다. 또한, 이것은 미지 플랜트 동특성을 식별하기 위한 신호로 사용되어, 플랜트의 정보를 얻는데 이용되었다. 즉, 기준모델과 플랜트 출력사이의 추종 오차 정보가 적응기구인 PID 유전제어기의 입력으로 사용되며, 구형파 입력의 경우에도 기준모델과 플랜트의 출력차는 크게 변하지 않는다. 따라서, 유전 알고리즘의 목적함수에 기준 모델을 제안 적용하여 안정적이고, 세밀한 제어를 수행하였다. 둘째, PID의 간단하면서 확실한 제어가 가능하다는 점과 전역적인 최적값을 찾을 수 있는 유전 알고리즘을 적용하여 고속제어를 요하는 직류 서보 모터(DC Servo Motor) 운전 시 실시간 파라미터 동조에 적용하였다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.3
• /
• pp.48-54
• /
• 2015

In this study, we propose an innovative lateral force distribution building system between tall buildings by utilizing the difference of moment of inertia, resulting the reduction of lateral displacement and the lateral forces in terms of an alternative for the dense human and increased cost of lands in highly integrated city area. A successive collapse prevention means by providing additional bearing plate between connections is proposed. In addition to that, a more economical vibration reduction is expected due to the suggested tuned mass damper on the surface of spacial structure. In the considered verification examples, reduced drifts at the top location of the building systems are validated against static wind pressure loads and static earthquake loads. The suggested hybrid building system will improve the safety and reliability of the new or existing building system in terms of more than 30% reduced drift and vibration through the development of convergence of tall buildings and spatial structures.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.6
• /
• pp.46-52
• /
• 2002

Characteristics of flow rate control has been studied for a cavitating venturi adopted in a liquid rocket propellant feed system. Both experiment and numerical simulation have been performed to give about 10% discrepancy of mass flow rate for cavitating flow regime. Mass flow rate is confirmed to be saturated for pressure difference higher than $3{\times}10^5$pa when the upstream pressure is fixed to $22.8{\times}10^5$pa and the downstream pressure is varied. The evaporation amount depends substantially to non-condensable gas concentration. However the mass flow rate characteristics is relatively insensitive to the mass fraction of non-condensable gas. So it reduces by only 2% when the non-condensable gas concentration is increased from 1.5PPM to 150PPM. From the previous comparison the expansion of the non-condensable gas and the evaporation of liquid are verified to gave same effect to the pressure recovery pattern.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.7 no.3
• /
• pp.1-7
• /
• 2003

In this research, it is intended to measure shape of the nozzle throat of the KL-3 engine, which is the main engine of the KSR-III rocket. For the purpose, an image-based method was invented to replace the 3D pointer, which is actually inaccessible to such large scale engines. As a result, our equipment showed satisfactory Performances. Analysing the results of experiments, we find that the pattern of ablation is determined by the spray pattern and that the process of thermal ablation phenomena can be categorized in three regimes - the first regime that the shape of nozzle throat is maintained and ablation is negligible, the second regime that saw-tooth form is developed and ablation is accelerated, and the third regime that the saw-tooth form is already established and the growth of ablation rate is reduced Also, we find that the ratio of area increase after 60 seconds combustion is +5.82% and conclude that the ratio is acceptable and satisfactory.

• Journal of Ginseng Research
• /
• v.1 no.1
• /
• pp.79-88
• /
• 1976

A determinatien of the saponins in ginseng tea and extract was carried out by using the quantitative TLC autodetector equipped with a hydrogen flame ionization detector. In order to apply to the Quality central of the ginseng tea and extract. the optimum condition and recovery percentage for the quantitative determination of saponins in these products duo studied. The results obtained were as follows: The method was adequate to estimate whether the ginseng extract used for the Products and She raw ginseng extract were the same quality or net. Most of the individual peak area was increased with the concentration of the total saponin. But some of the peak areas were net increased quantitatively in the ease of the sample containing high concentration ginseng extract. To deternine the saponins in ginseng tea correctly high volume low concentration was better than the low volume high concentration. Optimum concentration of ginseng extract in sample to determine the individual saponins was in the range of 0.5∼1.5g. The recovery percentage of the total saponin was 99.5% on the average.

• Journal of Energy Engineering
• /
• v.28 no.3
• /
• pp.34-41
• /
• 2019

It is essential to introduce EERS (Energy Efficiency Resource Standards) according to the trend of the era in which energy saving is emphasized, and it is time to settle down in a stable manner. Electric motors and lighting devices, which account for more than 60% of the nation's electricity use, are the most effective items of the EERS. And accurate methods of calculating savings must be preceded. In this study, the operation rate and load rate are measured through the demonstration of energy use at 400 businesses and the measured rates are used for EERS savings calculation. The results imply that the proposed method can be successfully applied to calculate cost-effective and reliable energy savings.

• International Area Studies Review
• /
• v.13 no.2
• /
• pp.741-769
• /
• 2009

We have been analyzed by research on the characteristics of professional consciousness, professional preparation, employment, and career life aimed at Chinese students. There is a tendency that overall trend is almost the same, even though there might be a small difference according to the characteristics of Chinese students' gender and scholastic year. Especially, a drift to the economic aspect of professional consciousness is a reflection of increasing hardship on our society. In spite of now is the era of disappearing permanent job and being changed to the concept of lifelong career, there is exceedingly rare places for getting education of professional consciousness or related information. It is needed to inform upright professional consciousness and to educate the Chinese students.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.30 no.12 s.159
• /
• pp.1800-1809
• /
• 2006

The wearable technology takes the concept of clothing over its limits -integrating software, communication devices, and sensors into the garments to enable them to 'think' for the wearer. A dress is no longer just a dress, but a dress as well as a wearable computer interface. This wearable computer network transports the data power and control signals within the wearer's personal space. The purpose of this thesis is to explore the wearable technology from a commercial perspective. On this theme I made a survey and interviewed 20 men and 20 women in London to find out if many people are familiar with the concept of the wearable technology. The main results of this study include: Firstly, according to the survey, people are not familiar with the concept of the wearable technology, and further people thought negatively about the wearable computer rather than positively they worried about hish prices, inappropriate technology and side effects. Secondly, people are especially interested in items related to health and security, so in this area there are huge potential opportunities for the wearable technology, Finally, wearable technology needs to be a simplified set of interactive devices, which are in a user friendly format for marketability because convenience was one of the biggest concern for consumers. Therefore, development of the wearable computer should be promoted not only through computer engineering but also through the connection with human lift.

• Korea journal of population studies
• /
• v.25 no.2
• /
• pp.231-270
• /
• 2002

US government and leaders in education have deeply paid an attention to the transition from school to work as we live in an era of globalization and fierce competion between countries. Industrial leaders, on the one hand, stress that schools should be reformed to adapt to changing technical environment. On the other hand, general educators still maintain that school education should strive to educate people to be a good citizen. However, fierce competition between countries under the remarkable development of computer and information technique has led the US government to create new programs of the transition from school to work. However, parents as well as students are still suspicious that diplom of high school with stress in skills is enough to keep a stable job, guarantee a satisfactory salary, and mai lain a social status. Accordingly they are more likely to use the school-to-work program as a supplement to the transition to college than to participate in the program to get a good job after high school. Each state in the US prepares its own program of the school-to-work transition with financial supports from the federal government. But the prospect of the programs in each state is not optimistic as financial supports from the federal government have decreased. The school-to-work transition program is strongly needed not only for those half who do not go to college but also for the US government that requires workers with a high level of skills. Nonetheless, the program is not firmly established in the US yet.