• Magazine of the Korea Concrete Institute
• /
• v.10 no.5
• /
• pp.101-107
• /
• 1998

본 논문은 비선형 스트럿-타이 모델에 의한 프리스트레스트 콘크리트 정착부의 거동해석 및 설계에 관한 연구이다. 프리스트레스트 콘크리트 구조물의 정착부는 긴장재의 인장력 도입으로 인해 비교적 작은 단면에 큰 집중하중으로 발생하는 매우 중요한 구조부위이며, 기존의설계가 비교적 다른 구조부위의설계에 비하여 경험적으로 이루어지고 있을 뿐 만 아니라 해석에도 많은 시간과 계산량이 소요되는 단점이 있다. 비선형 스트럿-타이 모델을 대상 정착부의 비선형 재료거동을 따르도록 비선형 해석을 실시하여 설계를 수행하고 구조물의 극한하중을 추정하는 방법이다. 본 논문에서는 긴장력이 정착부의 중앙에 도입되는 경우, 편심으로 도입되는 경우, 다중 정착구가 존재하는 경우에 대하여 선형과 비선형 스트럿-타이 모델을 구성하여 정착부의 역학적 거동을 고찰하였고 실험결과와 비교하였다. 비교로부터 비선형 모델을 사용한 경우 선형 모델을 사용한 경우보다 안정성을 유지하면서 경제적인 설계가 가능하고 추정극학강도도 실험결과에 더욱 근접함을 알았다.

• Microbiology and Biotechnology Letters
• /
• v.29 no.3
• /
• pp.169-175
• /
• 2001

This study was conducted to investigate the effects of bifidobacteria on the growth and Caco-2 cell-adherence of Escherichia coli O157:H7 .Dur-ing momo-culture of E. coli O157:H7 and mixed culture with Bifidobacterium infantis K9, pH viable cell count, and ammonia concentration were measured Co-cultivation of E. coli O157:H7 with bifidobacteria. producing acidic metabolites rapidly decreased the viable cell count of E. coli O157:H7 In addition rapid decrease of ammo- nia concentration was observed during mixed culture after 8 hrs incubation compared to single culture of E. coli O157:H7 Therefore it is likely that bifidobacteria assimilate ammonia produced by E. coli O157:H7 P4 B, infantis K9 showed quite similar adherence on the Caco-2 cells in either case. On the other hand adherence of E. coli O157:H7 decreased from 2.6% to 1.86% when B infantis K9 was adhered to Caco-2 cell 2 hrs prior to the application of E. coli O157:H7 In conclusion in adherence of E coli O157:H7 to Caco -2 cell was inhibited by competition of its binding to the adherence site with bifidobacteria. In addition inhibitory effects of bifidobacteria on E coli O157:H7 appeared to be much higher with increae of the number of bifidobacteria and its ability of adherence to Caco-2 cells.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.41 no.2
• /
• pp.1-8
• /
• 2004

This paper presents an optimal robust LQ-PID controller design method for the second order system with time-delay to meet design specifications. By LQR formulation of the second order system with time-delay, the tuning parameters of PID controller are related by weighting factors Q and R of cost function. The selection of weighting factors Q and R are chosen to satisfy such the design specifications as overshoot and settling time.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.619-622
• /
• 2011

케이블 정착구 검토를 위해서 사장교 전 체계를 모델링하는 것은 전체모델링 해석시 많은 노력과 시간이 요구되고 해석결과의 분석 또한 어려움이 많다. 따라서 문제가 예상되는 부분만을 국부 상세해석하여 구조적 거동을 정확히 파악하는 것이 필요하다. 케이블 정착부에는 여러 보강재들로 구성되어 있어 국부해석에 어려움이 있다. 따라서 실제와 가능한 한 근접하도록 모델링을 하고 전체 구조물의 거동을 국부 상세모델에 적적히 반영할 수 있도록 경계조건을 설정하는 것이다. 본 논문에서는 부산 지하철 4호선의 아치형 사장교를 국내 범용 구조해석 프로그램인 MIDAS/CIVIL을 이용하여 아치리브와 거더정착구 모델링을 실시하였다. 해석 후 해석의 타당성을 검토하고 정착부의 안전성을 확보할 수 있는지 검토 분석 하고자 한다.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.41 no.1
• /
• pp.17-24
• /
• 2004

This paper proposes an optimal robust LQ-PID controller design method for the second order systems to satisfy the design specifications in time domain. The tuning parameters of LQ-PID controller are determinated by the relationships between the design parameters of the overshoot and the settling time which are design specifications in time domain, and the weighting factors Q and R in LQR. we can achieve the performance-robustness in time domain as well as the stability-robustness.

• Journal of the Korean Geotechnical Society
• /
• v.33 no.10
• /
• pp.59-69
• /
• 2017

The tension load of the ground anchor inserted in the ground gradually changes over time. In this regard the change of the initial tension load is primarily decreased by the fixation condition of the fixing head and the mechanical characteristics of the tensile material. The subsequent additional tension load is a time-dependent loss mostly due to the fixing conditions of the bonded length and the surrounding ground properties of the field. In this paper, therefore, a measurement system using a relative displacement detector that can relatively easily measure the change of tension load is discussed. As a result of the review, it was confirmed that the results using the relative displacement detector are similar to those of the real scale model test, and it was also confirmed that similar results were obtained with the result of the pull-out test conducted on the ground anchors fixed to weathered rocks condition. In addition, a pull-out test was conducted on the test anchors whose initial tension load loss was relatively large and through this test pull-out behavior of the tension type ground anchors was verified.

• Korean Journal Plant Pathology
• /
• v.13 no.3
• /
• pp.160-166
• /
• 1997

Number of bacterial isolates were collected from high mountainous areas at various locations in the whole country to select promising biocontrol agents. Most of selected isolates belonged to fluorescent pseudomonads. Population densities of fluorescent pseudomonads were examined by DLF method. Alll selected isolates rapidly multiplied on spermosphere after seed inoculation upto 24, and then the population abruptly declined. When seeds were germinated fully, bacteria moved to newly emerging radicle. The good root colonizing isolates, B16 and V13 proliferated on the growing root and moved down to the root tip and lateral roots. but the poor root colonizing isolates, MC07 and X01 moved much slower. Scanning electron microscopic observations showed that the cells of the good colonizing isolates were arranged linearly on the growing root and parallel to growing root axis and continuously existed on the root tip, Whereas the cells of poorly colonizing isolates were gathered and scattered randomly on the root surface.

• Journal of Advanced Marine Engineering and Technology
• /
• v.24 no.1
• /
• pp.75-81
• /
• 2000

To provide the appropriate direction for development of transient control in a gasoline engine, transient performance analysis and evalution under four accelerating types based on typical driver's acceleration type were implemented by experimental study. In order to evaluate the characteristics of transient performance quanititatively, the concept and method by transient response specifications were introduced. Several performance parameters in terms of engine speed(RPM), manifold absolute pressure(MAP), fuel injection duration($\DeltatI_{nj}$) and air excess ratio($\lambda$) were emasured simultaneously during the four types of the throttle valve opening with the step motor controlled by PC. The result showed that transient response specifications in terms of delay time, rising time and settling time characterized the transient performance for four acceleration types quantitatively. Intensified acceleration type was most economical and linear acceleration type revealed the best emission performance.

• Journal of Sericultural and Entomological Science
• /
• v.26 no.2
• /
• pp.16-25
• /
• 1984

The sericin fixation of silk fabrics by epoxy resins was studied in the presence of aqueous salt solution in different solvents at the indicated temperature for the desired time. Heavy weight gains were obtained in the reaction with glycerol diglycidyl ether (EX-313) and ethylene glycol diglycidyl ether (EX-810) catalyzed by potassium thiocyanate in such solvents as carbon tetrachloride and p-chloroethylene. The obtained results were summarized as follows; 1) The tested resins were found similar in reaction behavior to silk fabric. The effect of fixation and weight gains was higher in EX-810 than EX-313. 2) The weight gains were increased with reaction time and temperature, and degumming ratio reached a constant value in 90 min at 70$^{\circ}C$. 3) The weight gains and the degumming ratio reached an equilibrium at 3-5% of epoxy concentration. 4) The weight gains were remarkably influenced and increased by the concentration of salt solution. The degumming ratio reached an equilibrium over 0.5N concentration of salt. 5) The weight gains were increased with the dipping time in gently-sloping. The degumming ratio reached an equilibrium over 15 min dipping. 6) The effect of sericin fixation of hydrophobic solvents, such as Carbon Tetrachloride, p-Chloroeth-ylene, Cyclohexane, Xylene and Toluene, was found suitable. 7) The effect of drying temperature was not remarkable on the weight gains and the degumming ratio. 8) There was a slight decrease in the moisture regain of sericin-fixed silk and it may be possible to maintain the moisture regain in the sericin-fixed silk by the epoxy resins. 9) The results on testing physical properties of sericin-fixed silk fabric were as follows; The crease recovery was almost not different from undegummed fabric, but inferior to degummed fabric. The tensile strength was improving in accordance with the effect of sericin fixation, either the elongation did.

• Digital Contents
• /
• no.12 s.151
• /
• pp.116-118
• /
• 2005

제도가 알려져서 정착하기 까지는 많은 시간이 걸리는 경우가 있는데 SW 임치제도가 그러한 경우에 해당한다. 2003년에 미국의 유명한 임치기관인 DSI사를 방문했을 때 한 관계자가 1970년대에 미국에 소개된 SW 임치제도는 그 유용성이 알려져서 정착하기까지 20년이라는 세월이 걸렸다고 했다. 이 글은 우리나라에게 생소한 SW 임치제도에 대한 기본적인 이해를 돕고자 SW 임치제도의 메커니즘과 국내외 임치기관 등을 살펴보고, 임치사례를 통해 임치제도의 유용성을 소개한다. 그리고 최근 하도급 거래에 있어서 불공정한 관행을 시정하기 위해 도입된 기술자료 예치 제도의 주요내용도 함께 살펴보고자 한다.