• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.4
• /
• pp.437-442
• /
• 2010

Flow-accelerated corrosion (FAC) leads to thinning of steel pipe walls that are exposed to flowing water or wet steam. From experience, it is seen that FAC damage to piping at fossil and nuclear plants can result in outages that require expensive repairs and can affect plant reliability and safety. CHECWORKS have been utilized in domestic nuclear plants as a predictive tool to assist FAC engineers in planning inspections and evaluating the inspection data so that piping failures caused by FAC can be prevented. However, CHECWORKS may be occasionally ignore local susceptible portions when predicting FAC damage in a group of pipelines after constructing a database for all the secondary side piping in nuclear plants. This paper describes the methodologies that can complement CHECWORKS and the verifications of CHECWORKS prediction results using numerical analysis. FAC susceptible locations determined using CHECWORKS for two pipeline groups of a nuclear plant was compared with determined using the numerical-analysis-based FLUENT.

• Journal of the Korean Institute of Gas
• /
• v.17 no.6
• /
• pp.58-66
• /
• 2013

Among the risks which can be faced with fire, combustion toxicity is a significant influence on the survival. Fire toxicity researches have been limited generally on the lethal aspects. In this study, HF gas which can be generated from fire, and also found in general industrial site was used for analysis. Blood analysis and biochemistry analysis performed to find internal demage of experimental animals which were used for measuring average activity stopping time from Animal test(KS F2271: Gas hazard test). In addition, Using the malondialdehyde analysis, indicators of oxidative damage, we had quantitative analysis to target lymphocyte for measuring the oxidative damage caused by toxic substances.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.9 no.3
• /
• pp.59-66
• /
• 2010

Around a toll plaza, vehicles do such maneuvers as slow down, stop, and speed up to pay their tolls when they use ordinary toll gates. They can be expected more fuel consumptions compared to the vehicles which use the Hi-pass, a Korean type of Electronic Toll Collection System(ETCS). To measure the exact amount of difference between the two gas consumptions, we equipped a test vehicle with a measurement system and constructed a model toll gate on our test field. Through the field tests on fuel consumptions, we could confirm a 36.7 % of energy saving when the test car used the Hi-pass. Then we projected the result on the total traffic volumes which had used national expressway network for five months from January 2009. Projected to the whole traffic, potential cost savings reached 5.34 billion won. We expect this result be frequently mentioned of to prove the fuel efficiency of the Hi-pass system.

• Current Industrial and Technological Trends in Aerospace
• /
• v.8 no.1
• /
• pp.55-61
• /
• 2010

Thermal vacuum test should be carried out to verify the performance of the S/C on the ground under the simulated space environment. KARI already completed the construction of a Large Thermal Vacuum Chamber(LTVC) with 8 m of diameter and 10 m of length dimension. LTVC is for the purpose of performing the orbital environment test for large Space Craft(S/C). Inside LTVC, S/C is much smaller than LTVC. For the function test of S/C during the thermal vacuum test, the S/C has to be connected to Electrical Ground Support Equipment(EGSE) which includes several cable and RF wave guide inside LTVC. Also, MLI should be installed on S/C before the test. But it is very difficult to access the S/C inside big LTVC. To solve the accessibility to the S/C inside LTVC, KARI designed an access fixture. This fixture provides easy access to the any S/C thus can help safe installation and saving time for the related work inside LTVC. This paper describes whole process for the design of the access fixture.

• Polymer(Korea)
• /
• v.33 no.3
• /
• pp.237-242
• /
• 2009

This study examined the transdermal delivery of alendronate across hairless mouse skin. The effects of iontophoresis, perforation with a microneedle, and a combination of a microneedle pretreatment and iontophoresis were evaluated in vitro test. Hydrogel patches were polymerized by UN polymerization to supply a hydrogel patch to the iontophoretic transdermal drug delivery system. The alendronate content in the iontophoretic delivery patch was $5.0\;mg/cm^3$. The amounts of alendronate that permeated across the hairless mouse skin when current densities of 0.25 and $0.50\;mA/cm^2$ were supplied to the iontophoretic alendronate patch were $0.80{\pm}0.03$ and $2.00{\pm}0.02{\mu}g$, respectively. After pretreatment with a microneedle, the amounts of alendronate that permeated across the hairless mouse skin increased to $70.65{\pm}0.37$ and $162.23{\pm}0.40{\mu}g$, respectively. The biocompatibility of the iontophoretic alendronate patch was examined according to the international standardization organization 10993.

• Journal of the Korean Society for Railway
• /
• v.20 no.4
• /
• pp.466-473
• /
• 2017

Recently, domestic railway related institutes are developing pantographs for high speed trains; to lighten the upper arm, this device has a composite structure of CFRP (Carbon Fiber Reinforced Plastic) and aluminum instead of conventional steel. In the case of KTX-Sancheon, the pantograph must have a large current capacity because this system is of power-car type, supplying all necessary power for the train through a single pantograph. If the thickness of the pipe is arbitrarily increased in order to increase the current carrying capacity, without analyzing the thermal characteristics of the aluminum pipe, the increase in the weight of the upper arm may cause degradation of the current collecting performance. Therefore, in this paper, using the thermal analysis technique, we analyze the temperature change characteristics of the aluminum pipe of the upper arm over time, while receiving power at the stationary state of the KTX-Sancheon; we also examine the adequacy of the minimum thickness of the aluminum pipe in accordance with the proposed pantograph flow capacity.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.13 no.4
• /
• pp.278-286
• /
• 2008

This paper investigates the fault generation type and the cause of output interruptionsin bulky with $30^{\sim}500[KVA]$ double conversion UPS, and proposes the fault detection method to improve the reliability of power supply used in the critical load in industry. Identifies its existing way of detecting a quality of inverter output it to bypass when exceeds its expectation. Under a UPS managing system, when an inner (Power device, Controller, CPU) fault occurs it disrupts the power supply and these occurrences has been verified by the results of experiments and application results. To overcome these problems, the proposed method constructs independently a fault-detection, a bypass-control device and a triple power supply apart from the conventional UPS operation. Also the detection point is changed to the preceding of a circuit breaker, a reference of fault detection is modified to avoid any clash and the breaking equipment is attached to intercept a spread of accident. As a result of applications of these developed systems to 242 UPS which was installed purposefully to the communication power supply, the service errors has not occurred in the UPS for two years since 2006.

• Journal of Mushroom
• /
• v.22 no.2
• /
• pp.53-59
• /
• 2024

This study analyzed the effects of different nitrogen sources in substrate composition on the growth of Pleurotus ostreatus, as well as the subsequent changes in flavor and antioxidant activity. The T2, composed of poplar sawdust, beet pulp, cotton seed dregs, and cotton seed coat in a ratio of 40:20:20:20, exhibited the highest yield at 156.6 g. The total polyphenol content and ABTS and DPPH radical scavenging activities were 8.25 mg GAE/g, 70%, and 49%, respectively, showing higher radical scavenging activity compared to the Control and T1. Additionally, varying nitrogen content resulted in distinct aroma patterns and is presumed to influence taste profiles such as sourness, umami, and saltiness.

• Progress in Medical Physics
• /
• v.18 no.2
• /
• pp.81-86
• /
• 2007

The cone-beam CT (CBCT) which is acquired using on-board imager (OBI) attached to a linear accelerator is widely used for the image guided radiation therapy. In this study, the effect of respiratory motion on the quality of CBCT image was evaluated. A phantom system was constructed in order to simulate respiratory motion. One part of the system is composed of a moving plate and a motor driving component which can control the motional cycle and motional range. The other part is solid water phantom containing a small cubic phantom ($2{\times}2{\times}2cm^3$) surrounded by air which simulate a small tumor volume in the lung air cavity CBCT images of the phantom were acquired in 20 different cases and compared with the image in the static status. The 20 different cases are constituted with 4 different motional ranges (0.7 cm, 1.6 cm, 2.4 cm, 3.1 cm) and 5 different motional cycles (2, 3, 4, 5, 6 sec). The difference of CT number in the coronal image was evaluated as a deformation degree of image quality. The relative average pixel intensity values as a compared CT number of static CBCT image were 71.07% at 0.7 cm motional range, 48.88% at 1.6 cm motional range, 30.60% at 2.4 cm motional range, 17.38% at 3.1 cm motional range The tumor phantom sizes which were defined as the length with different CT number compared with air were increased as the increase of motional range (2.1 cm: no motion, 2.66 cm: 0.7 cm motion, 3.06 cm: 1.6 cm motion, 3.62 cm: 2.4 cm motion, 4.04 cm: 3.1 cm motion). This study shows that respiratory motion in the region of inhomogeneous structures can degrade the image quality of CBCT and it must be considered in the process of setup error correction using CBCT images.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.28 no.1
• /
• pp.1-11
• /
• 2010

This study examines the authentic meaning, location, garden layout, and structural characteristics of Suwoojae(守愚齋), the birth house of Garam Byungi Lee, which was the very epitome of the traditional house structure based on literature review, field survey, and the existing measured drawings. The followings explain how rusticity and spirit of scholars, the core concepts of Garam's poetry, were featured in structural and spacial arrangements of Suwoojae as well as its location and physical layout. 1. Suwoojae is enclosed by Cheonho mountain which fans out of Noryoung mountains in East and located on the tail of Yongwha mountain in West. It has proved to be Yangtack Myoungdang according to the Poongsoo theory, Inguljiryoungron; The energy of earth at a certain location results in the better fortune together with the energy emitted from human body. 2. Suwoojae is an official local monument which was built in 1844, late Joesoen Dynasty by Joheung Lee, Garam's grandfather. Some parts of inner-structure connect with the kitchen in the shape of called Gopae. Suwoojae consists of 4 Sarangchae, 3 Gobangchae, and a Jangdokdae behind Anchae. 3. Since inner and outer walls of Suwoojae are distinctly separate from the main structure, its look varies significantly from different angles. Suwoojae, in its entirety, discloses Garam's philosophy, ideas, and ideology on life and the universe. 4. Apricot trees, Japanese-magnolias, aromatic-trees, crape myrtle, white-magnolias, camellia-trees were planted on the left of the walls, and persimmon trees, jujube trees, plum trees, quince trees were at the inner-yard. Especially, trifoliate orange trees a natural monument of Jeonrabukdo draw substantial attention from visitors. 5. The main garden facilities are located in front of Sarangchae: A rectangle pond(14.72m in length and 3.87m in height), the surroundings of the pond and Anchae, rocks that have distinctive shapes. In general, the garden was designed to incorporate the scenery around Suwoojae as a part of its structure and contain the love for nature and aesthetic sense. 6. It seems that the natural surroundings of Suwoojae had helped form motives of Garam's poetry and assisted him in finding subject-matters and identifying the themes of his works. This is well revealed in his poem, Seungwoonjungee.