• Journal of the Korean Arthroscopy Society
• /
• v.10 no.1
• /
• pp.39-44
• /
• 2006

Purpose: The object of this study is to compare the Insall-Salvati ratio and Carton index between the patients who have an anterior cruciate ligament (ACL) tear and the patients who have no ACL tear. Materials and Methods: The study group included 114 patients who had an ACL tear and received arthroscopic reconstruction. The group I was acute ACL tear group, within 3 weeks after injury. The group II was chronic ACL tear group who had MRI was done after 3 weeks from injury. The group III was normal control group. We measured the Insall-Salvati ratio and Carton index on Magnetic Resonance Images (MRI) for all patients. Results: The Insall-Salvati ratio of control group was $1.02{\pm}0.12$ and Carton index of control group was $1.14{\pm}0.16$. The ACL-tear study group was $0.91{\pm}0.12\;and\;0.89{\pm}0.20$ respectively. The Insall-Salvati ratio and Caton index in ACL tear group was significantly less than those of control group. There were no significant differences in comparing with acute and chronic ACL tear group. Conclusion: Our study show that patella baja has an association with ACL tears, therefore in patients with an ACL tear who had patella baja, ideal graft for reconstruction was seriously considered.

• Restorative Dentistry and Endodontics
• /
• v.34 no.1
• /
• pp.8-19
• /
• 2009

The purpose of this study was to investigate the effects of four restorative materials under various occlusal loading conditions on the stress distribution at the CEJ of buccal. palatal surface and central groove of occlusal surface of endodontically treated maxillary second premolar, using a 3D finte element analysis. A 3D finite element model of human maxillary second premolar was endodontically treated. After endodontic treatment, access cavity was filled with Amalgam, resin, ceramic or gold of different mechanical properties. A static 500N forces were applied at the buccal (Load-1) and palatal cusp (Load-2) and a static 170N forces were applied at the mesial marginal ridge and palatal cusp simultaneously as centric occlusion (Load-3). Under 3-type Loading condition, the value of tensile stress was analyzed after 4-type restoration at the CEJ of buccal and palatal surface and central groove of occlusal surface Excessive high tensile stresses were observed along the palatal CEJ in Load-1 case and buccal CEJ in Load-2 in all of the restorations. There was no difference in magnitude of stress in relation to the type of restorations. Heavy tensile stress concentrations were observed around the loading point and along the central groove of occlusal surface in all of the restorations. There was slight difference in magnitude of stress between different types of restorations. High tensile stress concentrations around the loading points were observed and there was no difference in magnitude of stress between different types of restorations in Load-3.

• Proceedings of the KOR-BRONCHOESO Conference
• /
• 1982.05a
• /
• pp.5.2-5
• /
• 1982

With the improvement of living standard and socioenvironmental change, esophageal stricture due to acetic acid, Hcl, insecticides and lye has led to decrease remarkably. Esophageal stricture has decreased because of immediate treatment and adequate management. However there are still sporadic incidents of esophageal stricture due to inadequate treatment and uncooperation of patients. The authors recently have experienced seven severe cases of esophageal stricture. All six patients were treated with 18-51 French Sippy esophageal dilating bougie. One patient was transfered to thoracic surgery department due to complete esophageal obstruction. Case 1. A 23 year old housewife who ingested Hcl for suicide. After Witzel's operation, she visited to dilate esophageal first constriction stircture due to swallowing difficulty postoperation 2 months later. We were treated successfully. Case 2. A case of esophageal stricuture in the second and third physiologic constriction part. The patient was 51 years old man who ingested lye accidently, and was dilated by bougination. Case 3. The patient was 43 year-old man who ingested acetic acid as a mistake and was treated inadequately at hopsital. Inspite of treatment, esophageal stricture developed at the third physiologic part. We are trying to dilate the esophagues now. Case 4. The patient was 55 year-old woman who had ingested Hcl for the purpose of suicidal attempt. 2 months later gastroduodenal anastomoisis due to pyloric region stenosis, the first physiologic constriction stricture was dilated successfully. Case 5. The patient was 41 year-old woman who ingested Hcl for suicide 4 months ago. There was indwelled orogastric tube for 1 month but esophageal stricture developed at the first and 3rd constriction part. She was treated by using a bougination. Case 6. An athlete 21 year old man, ingested acetic acid 2 spoonful per 3 days by purpose in order to soften the bone for last 14 months. There was complete esophageal obsturction in esophagogram and transferred to the thoracic surgery department. Case 7. A 3 year-old girl was ingested lye at a accident. She had a bougination for 16 months under the general anesthesia for dilation due to whole irregular esophageal stricture. She developed lower esophageal perforation, but healed eventually.

• Membrane Journal
• /
• v.14 no.3
• /
• pp.207-217
• /
• 2004

In this study, we prepared nanofiltration membrane by applying the interfacial polymerization method as a way of manufacturing composite membranes. We have examined the effects of various preparation factors such as monomer concentration and composition, thermal curing condition, post treatment condition. In addition to preparation conditions, we also monitored the effects of operation conditions such as feed solution concentration and operation pressure on the permeation properties of the resulting nanofiltration membrane. We intended to increase the permeation rate of nanofiltration membrane by the enlargement of effective surface area using additives during interfacial polymerization step. With increasing the monomer concentration, membrane permeation rate are decreased with maintaining almost constant rejection. With respect to curing condition, with increasing the curing temperature both permeation rate and rejection are decreased. With increasing the ratio of MPD in amino monomer composition, permeation rate decreased drastically with high rejection. With increasing the feed solution concentration, both permeation rate and rejection decreased. Both permeation rates and rejection increased with increasing the operating pressure. Nanofiltration membrane have higher surface roughness with increasing additive concentration in the case of using MPD contained amine composition than using piperazine alone. Permeation rates are much lower than the nanofiltration membrane prepared by piperazine.

• Proceedings of the Korean Society of Developmental Biology Conference
• /
• 2003.10a
• /
• pp.129-129
• /
• 2003

번식효율이 높은 우수한 후보종빈돈의 조기선발기술을 개발하기 위해 후보종빈돈의 첫발정일령과 첫수정일령에 미치는 요인을 분석한 결과는 다음과 같다. 본 시험에 공시된 후보종빈돈은 충남 천안시에 위치하고 있는 양돈장에서 자돈을 생산ㆍ육성하여 체중 80~90kg에서 선발하였고, 체중이 약 110kg 도달하였을 때 최종 선발하여 이용하였으며, 사양관리는 양돈장의 관행에 따라 실시하였다. 첫발정조사는 생후 22주령때 부터 매일 아침, 저녁으로 2회씩 외음부의 충혈과 부종상태를 관찰하고 승가허용 자세유지 등을 통하여 발정여부를 조사하였다. 교배는 첫발정발견 후 2차 발정이 발현되었을 때 실시하는 것을 원칙으로 하였다. 첫발정 및 첫수정시에 등지방측정기(Lean-meater; Renco, U.S.A.)를 이용하여 제 10늑골의 정중선으로부터 좌측 또는 우측으로 약 5cm 이격된 지점을 2회 측정하여 평균치로 하였다. 후보종빈돈의 품종별 첫발정일령과 첫수정일령은 랜드레이스종이 171.91일과 202.18일, 요크셔종은 178.56일과 208.39일, 랜드레이스종과 요크셔종의 F$_1$은 190.20일과 213.60일로 랜드레이스종이 첫발정일령과 첫수정일령이 가장 빨랐으나 품종간 첫수정일령에 대한 유의적인 차이는 없었다. 출생계절별 첫발정일령 및 첫수정일령은 봄에 출생한 후보종빈돈은 194.14일 및 222.05일, 여름에 출생한 후보종빈돈은 163.25일 및 193.00일, 가을에 출생한 후보종빈돈은 160.25일 및 199.20일, 겨울에 출생한 후보종빈돈은 159.72일 및 190.11일로 봄에 출생한 후보종빈돈의 첫발정일령 및 첫수정일령이 겨울, 가을, 여름에 출생한 후보종빈돈보다 유의적으로 늦게 나타났다(P〈0.01). 등지방두께가 13~16mm인 후보종빈돈의 첫발정일령 및 첫수정일령은 180.32일 및 211.12일, 17~20mm인 후보종빈돈은 172.24일 및 202.43일, 21~23mm인 후보종빈돈은 162.20일 및 195.43일로 등지방두께가 얇을수록 첫발정일령 및 첫수정일령이 지연되었으나 유의적인 차이는 인정되지 않았다.

• The korean journal of orthodontics
• /
• v.36 no.5
• /
• pp.388-396
• /
• 2006

Treatment of skeletal Class III malocclusion with mini-implant anchorage is discussed in relation to vertical control of the maxillary posterior dentoalveolar region and horizontal control of mandibular anterior teeth. A midpalatal mini-implant provided anchorage for intruding the maxillary posterior teeth. Mandibular mini-Implant implants were used to bring about labioversion of mandibular anterior teeth. After mandibular setback surgery, improvement of the facial profile was obtained both horizontally and vertically, Total treatment time was 11 months. Stable occlusion was maintained after 18 months of retention, The effectiveness and efficacy of mini-implants for the treatment of skeletal Class III malocclusion are also discussed.

• The Korean Journal of Applied Statistics
• /
• v.22 no.1
• /
• pp.163-170
• /
• 2009

The purpose of this article is to measure the level of insurance industry's social cognition based on the university students' survey questionnaire. For this, this study analyzes the cognition of students on the level of social reliability, the causes of low reliability, and the measures of enhancing the reliability level about insurance industry. For the analysis of survey questionnaire, partially ranked data analysis was employed. The results show that most students recognize that the reliability of insurance industry is lower than that of other financial industry such as banks and securities firms. The main reason for this low reliability is the lack of sales forces' specialty, the complexity of insurance products and contracts, and negative media release about insurance industry. To enhance the social reliability level of insurance, establishment of the future insurance image is essential, and that can be achieved through strengthening the insurance education and public relations and simplifying insurance products and contracts.

• Microbiology and Biotechnology Letters
• /
• v.6 no.1
• /
• pp.17-22
• /
• 1978

The microbial and chemical changes, and characterization of the predominant acid-producing bacteria in the fermenting pig feces blended with corn meal at a ratio of 50：50 were studied. The fermentation was dominated by lactobacilli, which multiplied rapidly for the first 24 hours. The acid produced during the fermentation caused rapid pH drop to pH 4.5 and halted the growth of E. coli and yeast. The initial acid producing bacteria in the mixture was predominantly Streptococcus species, which were reduced in number rapidly. After 7 days of fermentation, three lactobacilli species were appeared L. acidophilus, L. fermenti, L. delbrueckii. Chemical changes during the fermentation were also studied. The lactic acid fermentation imparted a good tangy acid flavor to the corn-feces mixture by removing or covering the .fecal ordour and made the corn-feces mixture palatable for the animal as well as halted the unwanted microbial flora. We hope the lactic acid fermentation will replace the heat processing in the utilization of animal feces.

• Proceedings of the KIEE Conference
• /
• 2008.10b
• /
• pp.139-140
• /
• 2008

지상라이다는 고정도의 3차원 영상을 제공하고 레이저 빔을 현장이나 대상물에 발사하여 짧은 시간에 수백만점의 3차원좌표를 기록할 수 있는 최신 측량장비로서 다양한 응용분야에서 두각을 나타내고 있다. 본 연구에서는 지상라이다를 이용한 건축물의 3자윈 자동 윤곽선 추출을 다룬다. 지상라이다는 건축물의 3차원 윤곽선을 신속하게 추출할 수 있지만 지상기반 시스템이므로 여러 가지 장애물 때문에 건국물의 하단부에서는 추출이 쉽지 않다. 기존 항공라이다를 이용한 알고리즘에서는 사진의 색상차나 모폴로지 특성에 의존하여 범위를 제한하고, 이를 기반으로 윤곽선을 추출하였다. 하지만 지상라이다의 경우 항공라이다에 비해 분해능이 월등히 높다. 또한, 지상라이다는 지상에서 측정하기 때문에 항공라이다에서 어려운 건축물의 측면이나 정면도 윤곽선 추출이 가능하기 때문에 본 논문에서는 사진을 이용하지 않고 전처리를 하지 않은 데이터를 직접 이용하여 건물의 정면 윤곽선을 추출하는 것을 제안한다. 건물의 크기와 데이터 수 즉, 라이다로 측정한 포인트 수를 고려한 효율적인 Decimation방법을 제안하고 또한, Decimation된 데이터이서 지역적으로 제일 큰 값과 작은 값을 찾아낸다. 그 중 많이 벗어난 점을 편차를 이용하여 제거한다. 이렇게 찾아낸 건축물의 외곽점들을 이어 만든 윤곽선을 최종적으로 보간하여 좀 더 현실과 가까운 윤곽선 추출 방법을 제안한다.

• Journal of the Society of Naval Architects of Korea
• /
• v.32 no.3
• /
• pp.98-106
• /
• 1995

In ship and offshore structures, there exist many local structural systems which may be regarded as a combined structural systems composed of thick plates or double wall panels and attachments reducible to damped spring-mass systems. For vibration analysis of such a combined system an analytical method based on the receptance method is presented in this paper. The free vibrational characteristics and forced vibration responses of the combined system can be calculated by synthesis of receptances of the panel and attachments. To calculate receptances of the panel, it may be regarded as a Mindlin plate for consideration of effects of shear deformation and rotary inertia and the assumed mode-Lagrange's equation method is applied using Timoshenko beam function or polynomials having properties of Timoshenko beam function as trial functions. Through some numerical calculations, accuracy and efficiency of the presented method are shown.