• Resources Recycling
• /
• v.11 no.3
• /
• pp.37-45
• /
• 2002

Triboelectrostatic Separation procese is a technology that different particles charged after contact and rubbing different materials are separated in an electric field. At this time, charged polarity of different materials depends on their own work function. Therefore this study discovers work functions of various plastics and determines charging characteristics for the specific optimum operation condition. The experiment is conducted with two sample sets composed of various different plastics. Each sample is charged by contact and rubbing different materials. Surface charge of charged particles is measured by Faraday Cage. The specific work function of an each plastic is driven by measured charging amount and charged particles are separated in a certain electric field ($\pm$20 kV). At last, the relationship between charging amount and separation efficiency is induced by the separation experiment.

• Resources Recycling
• /
• v.13 no.1
• /
• pp.39-46
• /
• 2004

Triboelectrostatic separation process is a technology that different particles charged after contact and rubbing different materials are separated in a high electric field. This technology has an advantage in that it can be used for separating non-conducting materials such as plastics unlike other electrostatic separation processes. There are two objectives in this study. One is to develop an effective continuous tribo-electrostatic separation process. The other is to apply the developed device for the separation of mixed plastics. Results show that almost all tested plastics reaches over 95% in yield and grade after separation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.10
• /
• pp.1835-1841
• /
• 2006

Demand of enhanced bilge separation sensor system has been recently increased due to the severe regulation reinforcement of MEPC(Marine Environment Production Committee). Up to date bilge separation sensor has to be extremely accurate and highly reliable. To design and build such a bilge separator. a precise oily water separation level sensor that distinguishes oil from water is critical. Three dimensional simulations have been carried out to figure out the characteristics of capacitive level sensors, which grounds the finding of the parameters required to design the sensors. The parasitic capacitance problem which is inherent to capacitive level sensors has been taken care of. This paper concludes with the future research direction that can be pursued with the newly defined parameters of the capacitive level sensors.

• Resources Recycling
• /
• v.22 no.1
• /
• pp.29-35
• /
• 2013

The study on the recovery of Nylon from a radiator of End-of-Life Vehicle was conducted by using triboelectrostatic separation technique. For the effective separation of the sample(Nylon, PP glass), charge polarity and amount of each sample with various charging materials have been investigated by faraday cage. And then, charging material was selected as carrying out basic separation experiments with materials that can be possible to polarize samples. Finally, the continuos type triboelectrostatic separator was developed with selected charging material and the recovery possibility of the sample was confirmed as carrying out various separation experiments.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2003.05a
• /
• pp.124-125
• /
• 2003

본 연구에는 대부분 매립이나 소각에 의해 처리되고 있는 폐플라스틱을 재활용할 수 있는 선별기술 개발을 목적으로 물리적 선별 방법인 마찰하전형정전선별법을 이용해 플라스틱 재질분리 실험을 수행하였다. 이때 PVC와 ABS 분리 실험의 최적조건은 전극판의 전극 세기 20,000 (volt) 이상, 공기압 2(kg/$\textrm{cm}^2$), 입도 2mm이하, 습도함량이 40% 이하였으며, ABS grade와 recovery가 각각 약 98%와 97%, PVC 함량 2% 이하인 선별기술을 개발하였다.

• Resources Recycling
• /
• v.22 no.6
• /
• pp.33-40
• /
• 2013

Due to the environmental problem caused by plastics largely used in various fields, the importance of recycling is being emphasized. A research on material separation of ABS and PS mixed plastic waste, using a triboelectrostatic separator, was carried out for recovery the ABS. As a results of research on charging characteristic for choosing charging material, it was confirmed that ABS was optimum charging material for a tribo-charger in the material separation of ABS and PS. In the material separation using ABS charger, ABS grade of 99.5% and recovery of 92.5% were achieved at 20 kV, splitter position +2 cm from the center and 30% relative humidity. Therefore, material separation technique for recycling ABS and PS mixed plastic waste was established.

• Resources Recycling
• /
• v.10 no.3
• /
• pp.14-22
• /
• 2001

For the recycle of coal fly ash generated from power stations, we developed an electrocyclone system which can separate unburned carbon form coal fly ash, based on the fact that coarse fly ash particles contain higher amount of unburned carbon and unburned carbon particles are charged positively, and pure ash particles are charged negatively on contacting each other. Additionally, guide vanes were installed in the cyclone to control the cut size. Two types of electrode, stick and grid type, were designed to investigate the effect of electrode type. Results show that by introducing an electric field inside the cyclone, the yield increases by 5 to 15e1o. But the content of unburned carbon in the clean ash does not change significantly.

• Resources Recycling
• /
• v.15 no.1 s.69
• /
• pp.28-36
• /
• 2006

The development of material separation technique for waste plastic recycling are the necessary situation restricted by law the reclamation and incineration of waste plastic after 2004, with enforcement of EPR (Extended Producer Responsibility) system. As the this study is the research on the development of electrostatic separation techniques for recycling of life circles waste plastic by development of charging material and charger, the separation efficiency can be improved. Therefore, we developed the charger and electrostatic separator to increase charging efficiency and material separation per object plastics, rising these equipments, we removed PVC up to $99\%$ from two kinds of mixed plastics. And in case of restricting PVC content such as PET, we developed the separation technique that can remove PVC up to $99.99\%$ from PET with PET recovery about $80\%$. Also, as we separated over $98\%$ for three kinds of mixed plastics, and then established material separation technique to increase recycling of plastic.

• Proceedings of the Korean Institute of Resources Recycling Conference
• /
• 2005.10a
• /
• pp.23-33
• /
• 2005

The development of material separation technique for waste plastic recycling are the necessary situation according to restrict by law the reclamation and incineration of waste plastic after 2004 year, pith enforcement of EPR (Extended Producer Responsibility) system. As the this study is the research on the development of electrostatic separation techniques for recycling of life circles waste plastic, it can improve separation efficiency according to development of charging material and charger. Therefore, we developed the charger and electrostatic separator to increase charging efficiency and material separation per object plastics, using these equipments, we removed PVC up to 99% from two kinds of mixed plastics. And in case of restricting PVC content such as PET, we developed the separation technique that can remove PVC up to 99.99% from PET with PET recovery about 80%. Also, as we separated over 98% for three kinds of mixed plastics, and then established material separation technique to increase recycling of plastic.

• Resources Recycling
• /
• v.16 no.2 s.76
• /
• pp.56-62
• /
• 2007

In this study, we carried out the research on triboelectrostatic separation for heavy group plastics (PET, PVC) recovered from wet gravity separation. From the research on charging characteristic for the choice of charging materials, it was found that PP was optimum charging material to make high charging amount with opposite polarity for PET and PVC of heavy group. Therefore, we manufactured a charger of cyclone type using PP material for separation of PET and PVC. At optimum test conditions that used PP cyclone charger developed in this study, we developed a triboelectrostatic separation technique that can separate PET plastic up to grade of 98.5% and recovery of 86.2%. We established new separation technology that could recycle the PET and PVC heavy group plastics recovered from wet gravity separation.