• Transactions of the Korean Society of Automotive Engineers
• /
• v.3 no.3
• /
• pp.129-139
• /
• 1995

This study investigates the combustion characteristics of methane-hydrogen-air premixture in a constant volume combustion chamber. Primary factors of the combustion characteristics of methane- hydrogen-air premixture are the equivalence ratio and hydrogen supplement rate. In the case of $\phi$= 1.1, maximum combustion pressure and heat release rate have peaks, and they increase as the initial pressure and hydrogen supplement rate increase. The total burning time is also the shortest at the $\phi$= 1.1, it shorten by lowering the initial pressure and by increasing the hydrogen supplement rate. The maximum flame temperature is shown at the $\phi$= 1.0, and increasing the initial pressure and hydrogen supplement rate, it increases. The concentration of NO reveals the highest value at the $\phi$= 0.9, and it increases by increasing the initial pressure and hydrogen supplement rate. It is also found that the limit of lean inflammability of methane-hydrogen-air premixture is greatly widened by increasing the hydrogen supplement rate.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.5
• /
• pp.2054-2060
• /
• 2011

The purpose of this paper is to investigate spray characteristics of GDI injector that is economic and environment-friendly. Injector characteristics such as penetration length, spray angle and mixture formation were measured using experimental visualization technique. Especially, it has been analyzed that the influences of ambient pressure and injection pressure on penetration length and spray angle. To visualize the spray, a constant volume combustion chamber and fuel supply system have been manufactured. A high-speed camera and LED light source have been applied to obtain spray images. The experimental and visualization result shows that the penetration length is increased as decreasing ambient pressure and/or increasing injection pressure. Also, ambient pressure and injection pressure have minor effect on the spray angle variation.

• Journal of the Korean Society of Physical Medicine
• /
• v.7 no.1
• /
• pp.1-9
• /
• 2012

Purpose : This study aimed to compare the effect of two modes (proprioceptive neuromuscular facilitation combination patterns and ball exercise) of low back stability for chronic low back patients. Methods : The subjects were recruited fourty patients who had low back pain. All subjects were randomly assigned to PNF combination patterns group, ball exercise group. Measurements were performed fourtimes: pre test, 2weeks, 4weeks, and 6weeks. Main outcome measures comprised the visual analogue scale(VAS), balance performance monitor(BPM). Results : The results were as follows. In the comparison of VAS score, sway area, sway path, and sway velocity according treatment period, score was significantly reduced in both PNF combination pattern group and ball exercise group. In the comparison of the both VAS and sway area between groups, there were significant. PNF combination pattern group significantly more decrease than ball exercise group at 6 weeks. However, both sway path and sway max velocity between group, there were not significantly. Conclusion : These results of this study indicated that PNF combination pattern which performed for six weeks had a significant influence than ball exercise group on low back pain.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.7 no.6
• /
• pp.8-16
• /
• 1999

In this study, a new type of laser-induced ignition using a conical cavity has been developed to utilize all the available incident laser energy. In the method, it is possibile to ignite combustible methane/air mixtures by directing a laser beam of a constant small diameter into a small conical cavity, without focusing the laser beam. Shadow graphs for the early stage of combustion process show that a hot gas jet is ejected from the cavity, especially with lean mixture. After a very show time, the hot gas jet finishes issuing and the flame behavior is quite similar to flame propagation initiated by a conventional spark ignition. The combustion process using the new method exhibits more rapid pressure increase and a higher maximum pressure rise than that of the center ignition using laser-induced spark, with significant decrease in the combustion time. Also, the new ignition method is numerically modeled to simulate the flame kernel development and subsequent combustion process using the KIVA-IIcode. The calculated results show satisfactory agreement with experimental results.

• Proceedings of the KIEE Conference
• /
• 2006.07a
• /
• pp.317-318
• /
• 2006

전력 계통이 거대화되고 그 복잡성이 증가함에 따라 계통의 안정적인 운용을 위하여, 다양한 안정도 해석에 대한 요구가 제기되고 있다. 이에 따라 실시간 시뮬레이터를 이용한 계통의 과도현상 해석에 대한 연구 역시 증가하고 있는데, 이는 대규모 비선형 계통을 대상으로 할 경우 H/W의 제약으로 인해 현실적으로 많은 제한을 받는다. 하지만 FACTS등 새롭게 계통에 연계되는 전력 설비의 성능 검증 및 사례 연구를 위해서는 이러한 실시간 시뮬레이터를 이용한 실제 계통에 대한 다양한 과도현상 모의 및 해석이 필요하다. 이에 본 연구에서는 UPFC, SVC등 FACTS 기기가 포함된 한전의 실제 전력 계통을 대상으로 등가화 및 계통 축약 기법을 이용하여 해당 계통의 동적/정적 특성을 반영할 수 있는 등가계통을 PSS/E상에서 개발하고, 등가 계통과 실 계통에 대한 다양한 모의를 통해 그 타당성을 검증하였다. 이렇게 개발된 등가 계통 모델은 각 FACTS 기기에 대해 독립된 모델 계통으로 실시간 시뮬레이터를 이용한 FACTS 기기의 성능 검증 및 평가에 활용될 수 있을 것이다.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.10
• /
• pp.148-158
• /
• 2015

It is difficult to test a detection system in underwater acoustics channel environments. The system can be evaluated by using simulation analysis tool. In this paper, a simulation tool is proposed to analyze the effectiveness of underwater acoustics detection based on database for real environments. First, the underwater environment is built based on HYCOM underwater environment database. Then, a multipath characteristic is considered through calculating underwater acoustics propagation path/pressure based on the ray theory. Also, hydrophone thermal noise and underwater ambient noise are considered to reflect underwater noise characteristics.

• Journal of Korean Society of Steel Construction
• /
• v.26 no.5
• /
• pp.441-452
• /
• 2014

In this paper, steel reinforced concrete(SRC) column and composite beam connections were statically tested under gravity loading. The composite beam consists of H-section and U-section members. Five full-scaled specimens were designed to investigate the effect of a number of parameters on behavior of connections such as H-section size, the presence of stud connector, the presence of stiffeners and top bars. In addition, structural performance of welded joint between the H-section and the U-section members is mainly discussed, with an emphasis on initial stiffness, strength, deformation capacity.

• Journal of Advanced Marine Engineering and Technology
• /
• v.28 no.7
• /
• pp.1055-1062
• /
• 2004

As for the Production of internal combustion engines there has been further movement toward development of high Performance engines with improved fuel efficiency as well as a lightweight and a small size. These tendencies help to solve the problems in engines for example, such as thermal load. abnormal combustion and so on. In order to investigate these Problems, a thin film-type probe for measuring instantaneous temperature has been suggested. A method for manufacturing such a probe was established in this study The instantaneous surface temperature of a constant volume combustion chamber was measured by using this probe and the heat flux was obtained through Fourier analysis In order to thoroughly understand the characteristics of combustion. authors measured wall temperature of combustion chamber and calculated heat flux through a cylinder wall while varying the protrusion height of probe. For these Purposes, the instantaneous surface temperature probe was developed. thereby making possible the analysis of instantaneous temperature of wall surface and the detection of unsteady heat flux in the constant volume combustion chamber.

• Journal of ILASS-Korea
• /
• v.19 no.4
• /
• pp.188-196
• /
• 2014

The spray and combustion characteristics of n-dodecane fuel were investigated in a CVCC (constant volume combustion chamber). The selection of ambient conditions for the spray followed ECN (engine combustion network) guidelines, which simulates the ambient condition of diesel engines at start of fuel injection. ECN is a collaboration network whose main objective is to establish an internet library of well-documented experiments that are appropriate for model validation and the advancement of scientific understanding of combustion at conditions specific to engines. Therefore repeatability of the experiments with high accuracy was important. The ambient temperature was varied from 750 to 930 K while the density was fixed at around $23kg/m^3$. The injection pressure of the fuel was varied from 500 to 1500 bar. The spray was injected in both non-reacting ($O_2$ concentration of 0%) and reacting conditions ($O_2$ concentration of 15%) to examine the spray and the combustion characteristics. Direct imaging with Mie Scattering was used to obtain the liquid penetration length. Shadowgraph was implemented to observe vapor length and lift-off length at non-reacting and reacting conditions, respectively. Pressure data was analyzed to determine the ignition delay with respect to the spray and ambient conditions.

• Journal of the Korean Home Economics Association
• /
• v.45 no.6
• /
• pp.113-122
• /
• 2007

The purpose of this study was to examine the relationship between online apparel impulse buying behavior and apparel website characteristics. The data were collected using an online survey with a structured questionnaire. To recruit participants, online surveys were collected and a total of 236 college students were used in the study. The results of factor analysis showed that website characteristics consisted of two factors (i.e., promotion, product/policy information). The results of MANOVA and multiple regression showed that the impulse purchase group evaluated the website where they bought the last apparel item significantly better in promotion and product/policy information than the non-impulse purchase group. Based on the results, H1, H2, and H3 were supported. The evaluations of the characteristics of websites where impulse purchases and non-impulse purchases of apparel products were made were significantly different.