• Aerospace Engineering and Technology
• /
• v.7 no.2
• /
• pp.46-52
• /
• 2008

The instrumentation was studied in order to measure aerodynamic performance and efficiency of a compressor as a component of a 5MW-class gas turbine for power generation. In case of an axial compressor, the distributions of static pressure on a casing can be obtained by averaging at each stage and those of total pressure and temperature in the flow field of the compressor can be measured with a Kiel temperature probe. In case of a centrifugal compressor, the static pressures at the hub and the tip, respectively, of an impeller exit are considerably different, so the pressures need to be measured at both positions and thereafter averaged. The distributions of static pressures in a diffuser and a deswirler are measured at ten positions along five streamlines in one pitch. In addition the flow field can be measured in detail by 5-hole Pitot tube in order to analyze the flow characteristics of the core flow region and wake region and the rotor-stator interaction of the compressor.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.1924-1928
• /
• 2009

다중패커시스템은 격리된 어느 특정 구간의 지하수를 채수할 수 있으며 그 구간의 온도, 압력 등의 자료를 연속적으로 관측할 수 있어 이를 통해 각 구간별 수리전도도를 구할 수 있다. 심도별 수직적 지하수두는 지상에서 연결 롯드를 통해 압력 측정 센서를 해당 심도까지 내려 롯드에서 설치된 압력 측정용 장비에서 관측할 수 있으며, 다중패커시스템을 이용한 수리시험으로는 양수시험, 순간충격시험, 간섭시험 등이 있는데, 본 논문에서는 순간충격시험을 이용한 결과를 제시하였다. 도출된 구간별 수리전도도를 다중패커시스템을 설치하기 전 나공에서 이중 패커를 이용한 정압주입시험의 결과와 비교하여 보았다. 다중패커시스템을 통해 획득된 심도별 지하수두는 정수두 (hydro-static)상태의 일정한 경향성이 없이, 각 심도에 존재하는 투수성 구조에 영향을 보이고 있음을 알 수 있었으며, 이는 다수의 관측공을 통해 수평 방향의 수리경사를 산출함에 있어 관측공의 심도에 대한 충분한 고려가 있어야 한다고 판단된다. 또한, 다중패커시스템을 이용한 수리시험 결과를 나공 상태에서 이중 패커를 이용한 정압주입시험 결과에 대해 심도별 도출되는 수리전도도가 국지적으로 분포하는 투수성 구조에 영향으로 인해 투수량계수 (transmissivity)로 환산한 유효 투수계수로 비교하여 결정질 암반의 수리 특성으로 제안하는 것이 타당한 것으로 분석되었다.

• Tunnel and Underground Space
• /
• v.33 no.5
• /
• pp.348-372
• /
• 2023

In relation to the high-level radioactive waste disposal project in deep fractured rock aquifer environments, it is essential to evaluate hydrogeological characteristics for evaluating the suitability of the site and operational stability. Such subsurface hydrogeological data is obtained through in-situ tests using boreholes excavated at the target site. The accuracy and reliability of the investigation results are directly related to the selection of appropriate test methods, the performance of the investigation system, standardization of the investigation procedure. In this report, we introduce the detailed procedures for the representative test method, the constant pressure injection test (CPIT), which is used to determine the key hydrogeological parameters of the subsurface fractured rock aquifer, namely hydraulic conductivity and storativity. This report further refines the standard test method suggested by the KSRM in 2022 and includes practical field application case conducted in volcanic rock aquifers where this investigation procedure has been applied.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.26 no.4
• /
• pp.10-20
• /
• 2022

The performance analysis test of the scramjet engine intake was conducted under the Mach 5 condition of the scramjet engine test facility, a free-jet ground test facility of the Korea Aerospace Research Institute. A pitot/static pressure rake installed at the rear of the isolator was designed and manufactured to measure the total pressure recovery rate and mass capture ratio, which are typical performance factors of the scramjet engine intake. The effect of the rake mounted at the rear of the isolator on the intake, the performance analysis measured by the rake, and the change in wall static pressure distribution according to the angle of attack were performed. Finally, the point at which the intake unstart occurred was confirmed by using the rear back pressure adjusting device, which simulates pressure rise in the combustor, and the results are summarized in this paper.

• Geotechnical Engineering
• /
• v.20 no.5
• /
• pp.58-65
• /
• 2004

일반적으로 토압, 사면안정, 기초의 지지력 계산 등에 이용하는 강도정수를 결정하기 위한 시험법으로는 일축$.$삼축시험과 직접전단시험이 많이 이용되고 있다. 일축$.$삼축시험은 흙 공시체를 축방향으로 압축 또는 신장 파괴시켜서 압축강도를 구하는 것으로, 활동면의 응력을 Mohr-Coulomb의 파괴 기준으로부터 간접적으로 구하기 때문에 간접전단시험으로 불리고 있다. 특히. 삼축시험은 공시체의 주응력 상태가 명확하기 때문에 연구$.$실용면에서 폭넓게 이용되고 있다. (중략)

• Journal of the Korean Geotechnical Society
• /
• v.21 no.2
• /
• pp.137-144
• /
• 2005

A direct shear test is classified roughly by one side simple shear test of confining horizontal displacement type and torsional shear test of non-confining one. Direct shear test that has been widely used so far has some problems with test apparatus, testing and the analysis, and in particular that its strength value is everestimated in sandy soils. Also, progressive failure of shearing process happens from shear apparatus restriction and because the shear strain and shear stress are erratic in specimen, we can not define the shear strain value. In the meantime, a simple shear test having advantage of direct shear test is an ideal test method that can get stress-strain relation on shear because it can deliver constant shearing deformation to specimen. However, simple shear test cannot be used practically, because its structure makes tester manufacturing difficult. This paper described a on outline of test apparatus, improvement of test method, and constant pressure test results based on the obtained from improved direct shear apparatus and the standardization of JGS soil testing method.

• Journal of the Korean Institute of Gas
• /
• v.22 no.6
• /
• pp.104-108
• /
• 2018

Experimental studies have been done to examine the aging characteristics by regulator diaphragms of gas pressure, governor room of city gas. Various testing samples with different service periods were manufactured. The results of SEM observation indicated that the surface and thickness of the samples tested were slightly sensitive to the service periods. It was found that as the service periods increased, the tensile strength of diaphragm samples decreased. For samples over 25 years of service, the strength decreased to approximately 60 % of that of new diaphragms. It was also found that as the service periods increased, the elongation increased.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.04a
• /
• pp.645-649
• /
• 1997

In case of swash plate type axial piston hydraulic motor, hydrostatic bearing used to achieve the lubrication effect on the mechanical sliding contact areas between the following parirs ; sliooer-pad and swash plate,piston and cylinder bore,valve plate and cylinder block, etc. This study discussed the basic charateristic for the hydrostatic slipper-pad bearings with the capillary or orifice restrictor under static load condition. And, we also development of hydrostatic bearing tester for hydrostatic balancing test of pistion & slipper-pad assembly, and some experimental data on supply pressure step responce are reported.

• The Journal of Engineering Geology
• /
• v.3 no.2
• /
• pp.149-165
• /
• 1993

Nowadays, the field hydraulic test is still an only method to evaluate groundwater characteristics in subsurface. The results of hydraulic test are very important for the concept model of fracture hydrogeology as well as the geometric pattern of fractures. The hydraulic tests performed in Korea are generally analysed under such assumption as steady radial flow in homogeneous aquifer or along simple geometry of fractures. Also the transmissivity measured in a fixed interval length is equivalent to a sum of individual fracture transmissivities in test legth. The boundary effects of weH hydraulics and the geometry of flow paths are hardly obtained from the test results analysed by a steady flow method. To circumvent this problem, the flow dimensional analysis was attempted from the results of constant pressure injection test carried out in a fractured granite area. A comparison of the hydraulic conductivity values from the transient and steady analysis shows that the latter is about a factor of 2~3 higher than the former. However, it was possible to analyse a flow dimension of each test interval from flow rate variation with time. The upper part of the bedrock(<10m deep) indicates an open boundary and the flow dimension shows nearly steady states, while the lower part of the bedrock(>25m deep) is characterized as sublinear flow dimension with a dosed boundary. In one of the test sections(15m deep), the flow dimension was changed from linear flow to spherical flow. From the experience of this study, one of the immediate problems to be solved is to enhance the field testing equipments, i.e., an accurate flowmeter with autorecording and a pressure detecting device to be able to install in the test section.

• Korean Journal of Materials Research
• /
• v.5 no.3
• /
• pp.261-267
• /
• 1995

IN 617의 시편으로 1073K의 온도와 107과 180 MPA의 응력에서 $\varepsilon$=0.18까지 정압크\ulcorner을 한 직후 107 MPa로 응력을 낮추고 (응력강하시험), 또 다른 시편에는 180 ↔ 0.2 MPa의 응력으로 각각 17초씩 반복주기변형을 수행하여 정압크\ulcorner 변형시의 크\ulcorner곡선과 비교를 하엿다. 그 결과 IN 617 의 반복주기변형에서는 변형속도둔화(CCD)가 발생함을 알 수 있었고, 응력강하와 반복변형시험은 모두 거의 같은 모양의 회복 크\ulcorner곡선을 나타내었다. 이러한 회복 크\ulcorner은 아결정립크기와 자유전위밀도로서 그 회복기구를 설명할수 있었다.