• 한국체육학회지인문사회과학편
• /
• v.51 no.3
• /
• pp.353-362
• /
• 2012

The purpose of this research was to find effects of high fat diet and endurance exercise on mitochondria biosynthesis and insulin resistance in male Wister rat. Th rats were randomly separated into 4 groups: A, Isocaloric high fat diet group (50% of calories from fat), B. Chow group, C. Isocaloric high fat diet with endurance exercise (treadmill running, slop 8%, 23 m/min, 120 min/day, 5 days per week), D. Chow group with endurance exercise. Both Isocaloric high fat diet group and chow group were given an equal caloric composition with 3.2kcal/g. equal amount of food were checked every day and given to both groups. 4 weeks of high fat diet did not show any change in body weight and amount of body fat. Further the level of glucose and insulin in blood, and insulin-stimuilated glucose transport rate in epitrochlearis muscle was not affected by Isocaloric high fat diet. However, the endurance exercise showed statistically significant change in the level of insulin in blood. Although either Isocaloric high fat diet or endurance exercise alone did not change on mitochondria biogenesis marker, Isocaloric high fat diet with endurance exercise could induce the increased level of marker (p<0.05). Also, plasma free fatty acids were increased in this group. From this investigation, Isocaloric high fat diet with moderate-intensity endurance exercise is effective way to induce mitochondrial biogenesis.

• Clean Technology
• /
• v.15 no.3
• /
• pp.172-179
• /
• 2009

The thermoplastic polyurethane waste (TPU-S) with good tensile properties, hardness, NBS abrasion resistance, specific gravity and low wet coefficient of kinetic friction was melt-blended with ethylene propylene diene monomer rubber (EPDM) with high wet slip resistance and low mechanical properties to form EPDM/TPU-S blend films, and their composition-property relationship was investigated to find the optimum composition for shoe outsole material. The properties except the wet slip resistance increased with increasing TPU-S contents in the blend. All the properties except elongation at break, specific gravity and the wet coefficient of kinetic friction in the range of $0{\sim}65\;wt%$ of TPU-S did not attain the values predicted by the simple additive rule. The optimum weight ratio of EPDM/TPU-S for the application to the typical shoe outsole material was found to be 30/70.

• Journal of the Korean Geotechnical Society
• /
• v.26 no.5
• /
• pp.57-64
• /
• 2010

Kriging techniques have been used to estimate the spatial distribution of soil layers and soil properties in the geotechnical engineering area. Since the selected kriging technique may provide different values of estimation, the selection of method is important in the geotechnical estimation. In this paper, the spatial distribution of the thickness of consolidation layer of Songdo International City is estimated using simple, ordinary, and universal kriging techniques, and the reliability of estimated results is analyzed. It is shown that the consolidation layer thickness estimated by the simple kriging technique is larger than those by other kriging techniques when the location of estimation is far from the locations where the measured data exist. In this case, the reliability of the simple kriging technique is observed to be lower than those of other techniques. Universal kriging gives a negative value for thickness of consolidation layer in some locations away from the data. It is concluded that the ordinary kriging is the most optimized estimation technique because the reliability of ordinary kriging technique is higher than those of other ones and the consolidation layer thickness estimated by the ordinary kriging locates within the reasonable range.

• Journal of the Korean Geotechnical Society
• /
• v.24 no.6
• /
• pp.57-67
• /
• 2008

Two test methods, nonrepetitive plate loading test (NPLT) and repetitive plate loading test (RPLT) are being used to control the quality of compaction through the evaluation of the stiffness of subgrade soils in the Korea railway industry. Subgrade reaction modulus ($k_{30}$) from the NPLT and strain modulus ($E_v$) from the RPLT are the index values to check them. The methods have similar aspects, but they differ in the modulus evaluation method, the numbers of loading stage, termination procedures, etc. This paper analyses the differences of the two test methods and evaluates the relationship between subgrade reaction modulus and strain modulus. In order to develop the relationship, total 22 tests were performed including the NPLT and the RPLT at the 6 original grounds, and 5 upper or lower subgrades in Kyungbu High Speed Railway II stage construction sites. According to the soil conditions, the relationship between subgrade reaction modulus and strain modulus was proposed with corrections by considering strain states, mean confining pressures, and Poisson's ratio.

• Journal of agriculture & life science
• /
• v.50 no.1
• /
• pp.73-81
• /
• 2016

The objectives of this study were to determine the effects of thinning intensity on the changes of vegetation structure in Japanese Evergreen Oak(Quercus acuta Thunb.) stands in Wando-arboretum. The flora were composed of 24 families, 33 genera, and 36species in thinned sites. The dominant layer of control site showed higher number of plant species than that of treatment sites. On the while, the sub-dominant layer, shrub layer, and herbaceous layer treatment sites showed higher number of plant species than control site. According to the analysis of importance value, Q. acuta in the dominant layer, Q. acuta and Camellia japonica in sub-dominant layer, and Camellia japonica in shrub layer showed the highest importance values, respectively. The importance value of Trachelospermum asiaticum was the highest in the herbaceous layer. According to the results, species diversity was higher in descending order of heavy thinning, light thinning, and control. This result could be explained by increased light transmissions from higher thinning intensity than in other treatments. In this context, the results of this study may be useful for selecting appropriate tending methods in terms of forest management and biodiversity conservation.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.234-234
• /
• 2022

도로에서의 우수를 원활하게 처리하기 위해서 빗물받이 및 연결관 등의 노면 배수시설이 설치되고 있으며, 노면 배수는 측구부를 통해 흘러 빗물받이 유입부로 차집되고 연결관을 통해 하수관거로 배수된다. 그러나 최근 국내 기상패턴의 변화로 국지성 집중호우와 같이 시간당 강우량 증가로 도로부와 저지대에서 배수시설의 배수불량에 따른 도심지 내수침수 피해가 발생하고 있다. 이에 정부에서는 다양한 우수관거 개선사업, 빗물펌프장, 지하저류조와 같은 방재시설을 설치하고 있으나 우수유출저감시설은 대규모 예산이 소요되고 실제 침수지역에 피해 저감효과에 대한 효용성 문제에 대한 제기뿐만 아니라 과밀화된 도심지에서는 지하공간 활용에 한계가 있는 실정이므로 도심지의 다양한 공간을 활용한 도시 배수 및 저류시설에 대한 연구가 필요하다. 따라서 본 연구에서는 유휴 공간인 도로 측구부 공간을 활용하여 도로 노면수를 저류 및 지체할 수 있는 노면수 측구 저류시설의 개념을 제시하고 측구저류조의 활용성을 판단하기 위하여 빗물받이 유입구, 빗물받이, 측구 저류조 및 빗물받이와 측구저류조 연결부에서의 노면수 유입, 유출 및 저류 등의 다양한 흐름 변화를 확인하기 위하여 Fluent 모형의 적용성을 분석하였다. 수치모의 전체 형상은 50x50cm 크기의 빗물받이를 기준으로 양쪽에 2m 길이의 측구 저류조를 원형관으로 연결하여 1/5 축소모형으로 구성하고 격자는 빗물받이 유입부, 빗물받이 및 측구 저류조 내부의 복잡한 3차원 흐름을 모의하기 위해 사면체와 육면체로 조밀하게 생성하였다. 다상유동해석을 위해 VOF(Volume of Fluid)방법을 적용하였고, 수치해석 방법으로는 비정상류, 난류 모형으로는 SST k-ω모형을 적용하였다. 수치모의 조건으로는 설계빈도별(5~30년) 우수유출량을 산정하여 유입 유량별 기존 빗물받이 유입부에서의 유입흐름, 빗물받이 내부에서의 와 발생흐름, 측구 저류조 및 연결관에서의 흐름을 구현하여 분석하였다. 수치모의 결과 빗물받이 유입부에서 연결관을 통한 측구 저류조로 유입되는 유입흐름과 빗물받이 하단부의 배수관을 통해 유출되는 흐름을 정상적으로 구현하였으며, 빗물받이 유입부 및 측구 저류조 연결관에서의 유속변화도 확인할 수 있었다. 또한 빗물받이와 측구 저류조에서 다양한 흐름을 구현하기 위한 Flunet 모형의 적용성을 검토하였으며, 향후 수리실험을 통하여 실제 흐름과의 매개변수 최적화 및 다양한 도로 조건의 변화를 고려한 수치모의 분석을 통하여 지속적인 모형의 검증이 가능할 것으로 판단된다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.219-219
• /
• 2022

지구 온난화와 함께 발생하는 해수면 상승은 한반도의 해안지역을 비롯하여 울릉도 등 도서지역 전반에 걸쳐 진행 중이다. 또한 해수면의 온도 상승으로 인한 열대저기압의 생성 시 에너지 공급이 증가하며 연안으로 내습하는 파랑 내습 에너지가 커지게 된다. 경상북도 울릉군에 위치한 남양항은 최근 2019년 태풍 다나스 및 2020년 태풍 마이삭 등에 의해 고파랑 혹은 침수 피해가 발생하여 항 내에서는 물양장과 선박이 파괴되고 방파제가 전도되는 등의 피해가 속출하였다. 동해안의 태풍 내습, 지구 온난화와 저기압 발달에 의한 수위 상승 등과 같은 다양한 해양기후를 고려한 연안 구조물의 파랑 영향을 검토하는 것이 중요할 것으로 판단되었다. 기상청 태풍센터에서 제공하는 1979년부터 2020년까지 한반도 해역에 내습한 태풍 중 울릉도에 영향을 미친 태풍은 18개로 울릉도 인근에 영향을 준 내습 태풍을 10년 단위로 분석해 보면, 1980년대 3개, 1990년대 2개, 2000년대 8개, 2010년대 3개, 2020년 2개로 2000년대에 울릉도 영향권에 들어간 태풍이 가장 많았으며, 심해파 추산 기간 이후 2020년 1년 동안 울릉도 인근으로 마이삭, 하이선과 같은 2개의 태풍이 연속적으로 영향을 주었다. 울릉도에 영향을 미친 18개 태풍을 대상으로 일본 기상청(JMA)에서 제공하는 1시간 바람장을 이용하여 파랑 후측 수치 모의를 수행하였으며, 해양수산부와 기상청 관측 부이를 이용하여 파랑에 대한 정확도를 확보하였다. 고파랑 내습 시 연안에 조우하는 수위 조건은 파랑 에너지의 증가를 결정하게 되며, 항만 구조물의 설계에 적용되고 있는 약최고고조위 이상(4대분조의 최대 조위)의 최극조위 조건에서 해안 구조물에 월파 및 침수 피해를 주는 요인으로 작용할 수 있다. 이를 바탕으로 울릉도 남양항에서 폭풍 시 내습한 최극고조위(0.65m)와 IPCC 5차 보고서에 제시한 최악의 시나리오(RCP 8.5) 조건에서 울릉도에서 확인된 0.79 cm 상승고를 반영하여 범람위험평가를 광역에서의 계산 결과를 입력자료로 하여 준 3차원 비 정수압 파랑 변형 수치 모형인 MIKE 3 Wave를 사용하여 실험하였다. 해수면 상승에 의한 수위 상승고는 연안 파랑 증가에 영향을 주었으며 연안 구조물의 침수 피해에 영향을 줄 것으로 판단되었다. 월파 차단, 파랑 차폐의 목적으로 건설되는 구조물의 규모 및 천단고 등을 설정하는데 설계 수위의 선정은 중요하다. 수치 실험 결과를 바탕으로 방파제 및 호안의 범람 위험 평가를 수행하고 구조물 설계 시 이러한 해수면 상승고가 반영된 설계가 중요하다는 것을 위험 평가를 통해 확인할 수 있다.

• Journal of the Korea Institute of Building Construction
• /
• v.24 no.2
• /
• pp.203-213
• /
• 2024

This study delves into the mechanical properties of fiber-reinforced cement composites(FRCC) concerning the dispersion method of multi-walled carbon nanotubes(MWCNTs). MWCNTs find utility in industrial applications, particularly in magnetic sensing and crack detection, owing to their diverse properties including heat resistance and chemical stability. However, current research endeavors are increasingly directed towards leveraging the electrical properties of MWCNTs for self-sensing and smart sensor development. Notably, achieving uniform dispersion of MWCNTs poses a challenge due to variations in researchers' skills and equipment, with excessive dispersion potentially leading to deterioration in mechanical performance. To address these challenges, this study employs ultrasonic dispersion for a defined duration along with PCE surfactant, known for its efficacy in dispersion. Test specimens of FRCC are prepared and subjected to strength, drawing, and direct tensile tests to evaluate their mechanical properties. Additionally, the influence of MWCNT dispersion efficiency on the enhancement of FRCC mechanical performance is scrutinized across different dispersion methods.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.17 no.1
• /
• pp.17-24
• /
• 2024

In this paper, we propose a highly secure technique to hide confidential data in image pixels using a quadruple encryption techniques. In the proposed technique, the boundary surface where the image outline exists and the flat surface with little change in pixel values are investigated. At the boundary of the image, in order to preserve the characteristics of the boundary, one bit of confidential data that has been multiply encrypted is spatially encrypted again in the LSB of the pixel located at the boundary to hide the confidential data. At the boundary of an image, in order to preserve the characteristics of the boundary, one bit of confidential data that is multiplely encrypted is hidden in the LSB of the pixel located at the boundary by spatially encrypting it. In pixels that are not on the border of the image but on a flat surface with little change in pixel value, 2-bit confidential data that is multiply encrypted is hidden in the lower 2 bits of the pixel using location-based encryption and spatial encryption techniques. When applying the proposed technique to hide confidential data, the image quality of the stego-image is up to 49.64dB, and the amount of confidential data hidden increases by up to 92.2% compared to the existing LSB method. Without an encryption key, the encrypted confidential data hidden in the stego-image cannot be extracted, and even if extracted, it cannot be decrypted, so the security of the confidential data hidden in the stego-image is maintained very strongly. The proposed technique can be effectively used to hide copyright information in general commercial images such as webtoons that do not require the use of reversible data hiding techniques.

• The Journal of the Acoustical Society of Korea
• /
• v.43 no.1
• /
• pp.29-38
• /
• 2024

The Matched Field Processing (MFP) is an estimation method for a source range and depth based on the prediction of sound propagation. However, as the frequency increases, the prediction inaccuracy of sound propagation increases, making it difficult to estimate the source position. Recently proposed, the Frequency-Difference Matched Field Processing (FD-MFP) is known to be robust even if there is a mismatch by applying a frequency-difference autoproduct extracted from the auto-correlation of a high frequency signal. In this paper, in order to evaluate the performance of the FD-MFP using a horizontal line array, simulations were conducted in the environment of the East Sea of Korea. In the area of Bottom Bounce (BB) and Convergence Zone (CZ) where detection of a sound source is possible at a long range, and the results of localization were analyzed. According to the the FD-MFP simulations of horizontal line array, the accuracy of localization is similar or degraded compared to the conventional MFP due to diffracted field and mismatch of sound speed. There was no clear result from the simulations conforming that the FD-MFP was more robust to mismatch than the conventional MFP.