• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.4
• /
• pp.369-373
• /
• 2016

Accurate identification of damping matrix in structures is very important for predicting vibration responses and estimating parameters or other characteristics affected by energy dissipation. In this paper, damping matrix identification method that use normal frequency response functions, which were estimated from complex frequency response functions, is proposed. The complex frequency response functions were obtained from the experimental data of the structure. The nonproportional damping matrix was identified through the proposed method. Two numerical examples (lumped-mass model and cantilever beam model) were considered to verify the performance of the proposed method. As a result, the damping matrix of the nonproportional system was accurately identified.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1994.04a
• /
• pp.34-38
• /
• 1994

진동계측, 충격실험 및 진동해석등을 통하여 대형 다기능 공작기계(planomiller) 구조의 진동특성을 규명하고자 하였다. 정상적인 기존 모델에 대해 다양한 운전조건에서의 진동을 계측하여 그 주파수 특성으로부터 실험과 해석의 대상 주파수대역을 선정하고 주된 진동의 성분과 수준을 조사하여 향후 유사공작기계의 개발시 비교평가의 기준으로 삼고자 하였다. 또한 정지상태의 공작기계 구조물에 대한 충격시험을 통하여 실험 주파수응답함수를 구하고 이로부터 공작기계가 가지는 기본적인 고유진동수와 진동모드, 동강성 수준등을 파악하였다. FEM 모델에 대한 진동해석을 수행하여 실험결과와 비교함으로써 이러한 대형공작기계의 동특성 규명에 대한 해석적 예측의 가능성을 검토하였는데 특히 하부지지조건, 습동면 접촉부의 연결조건 및 감쇠력등이 동특성에 미치는 영향을 고찰하였다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.5
• /
• pp.28-33
• /
• 2005

Nonlinear aeroelastic characteristics of a two dimensional typical section model with bilinear plunge spring are investigated. Doublet-point method(DPM) is used for the calculation of supersonic unsteady aerodynamic forces which are approximated by using the minimum-state approximation. For nonlinear flutter analysis structural nonlinearity is represented by an asymmetric bilinear spring and is linearized by using the describing function method. The linear and nonlinear flutter analyses indicate that the flutter characteristics are significantly dependent on the frequency ratio. From the nonlinear flutter analysis, various types of limit cycle oscillations are observed in a wide range of air speeds below or above the linear flutter boundary. The nonlinear flutter characteristics and the nonlinear aeroelastic responses are investigated.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.2
• /
• pp.54-59
• /
• 2005

Nonlinear aeroelastic analyses of a missile control fin are performed considering backlash and dynamic stiffness of actuator. Doublet-Hybrid method is used for the calculation of subsonic unsteady aerodynamic forces, and aerodynamic forces are approximated by the minimum-state approximation. For nonlinear flutter analysis backlash is represented by a free-play and is linearized by using the describing function method. Also, dynamic stiffness is function of frequency and is calculated by solving equation of motion for actuator. The linear and nonlinear flutter analyses show that the aeroelastic characteristics are significantly dependent on the backlash and dynamic stiffness. From the nonlinear flutter analysis, various types of limit cycle oscillations are observed in a range of air speeds below the linear divergent flutter boundary. The nonlinear flutter characteristics and the nonlinear aeroelastic responses are also investigated in the time domain.