• Journal of the Korean Society of Radiology
• /
• v.12 no.2
• /
• pp.193-199
• /
• 2018

In this research, 15 patients were diagnosed with 1.5T and 3.0T MRI instruments (Philips, Medical System, Achieva) to minize Ferromagnetic artifact and find the optimized Tesla. Based on the theory that the 3.0T, when compared to 1.5T, show relatively high signal-to-ratio(SNR), Scan time can be shortened or adjust the image resolution. However, when using the 3.0T MRI instruments, various artifact due to the magnetic field difference can degrade the diagnostic information. For the analysis condition, area of interest is set at the background of the T1, T2 sagittal image followed by evaluation of L3, L4, L5 SNR, length of 3 parts with Ferromagnetic artifact, and Histogram. The validity evaluation was performed by using the independent t test. As a result, for the SNR evaluation, mere difference in value was observed for L3 between 1.5T and 3.0T, while big differences were observed for both L4, and L5(p<0.05). Shorter length was observed for the 1.5T when observing 3 parts with Ferromagnetic artifact, thus we can conclude that 3.0T can provide more information on about peripheral tissue diagnostic information(p<0.05). Finally, 1.5T showed higher counts values for the Histogram evaluation(p<0.05). As a result, when we have compared the 1.5T and 3.0T with SNR, length of Ferromagnetic artifact, Histogram, we believe that using a Low Tesla for Spine MRI test can achieve the optimal image information for patients with disk operation like PLIF, etc. in the past.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.22 no.2
• /
• pp.151-159
• /
• 2004

The diversity, expansion of human activity and rapid urbanization make modem society to faced with problems like damage of nature and drain of natural resources. Under these circumstances rapid and accurate change detection techniques, which can detect wide range utilization changes, are needed for efficient management and utilization plan of national territory. In this study to perform change detection from remote sensing images, space analysis technique contained in Geographic Information System is applied. And from this technique, the software. that can execute new change detection algorithm, query, inquiry and analysis, is produced. This software is on the basis of graphic user interface and has many functions such as format conversion, grid calculation, statistical processing, display and reference. In this study, simultaneously change detection for multi-temporal satellite images can be performed and integrated one change image about four different periods was produced. Further more software user can acquire land cover change information for an specific area through querying and questioning about yearly changes. Finally making of every application module for change detection into one window based visual basic program, can be produced user convenience and automatic performances.

• Economic and Environmental Geology
• /
• v.51 no.3
• /
• pp.279-289
• /
• 2018

With the launch of the new government in 2017, National Planning and Advisory Committee (NPAC) announced the five-year plan for the government administration and the 100 national tasks. The Ministry of Science and ICT (Information & Communication Technology) (MSIT) and other government agencies issued work plans for 2018, including R&D plans. Analyzing the changes in government policy will be a major task of public research and development institutions. This study analyzed the changes of the R&D policy of the new government and the R&D policy direction and strategic plan of the government departments related to the geoscience and mineral resources in 2018. The results of the analysis are as follows: 1) to lead the innovation growth through the 4th industrial revolution, 2) to supply clean energy and to cope with climate change in the environment and energy field, 3) to improve the quality of life through problem solving in the life of the people and disaster prevention. Considering the investment direction of the government, it is necessary to lead the geoscience and mineral resources R&D to solve problems of the society and to grow by the science and technology.

• Journal of Internet Computing and Services
• /
• v.8 no.2
• /
• pp.117-135
• /
• 2007

There are two purposes of this study; 1) to identify the perception about Web accessibility of students with disabilities and their Web-based Instructional personnel (WBI personnel) in higher education, and 2) to find out effective WBI design strategies actually used by WBI personnel to design and develop accessible Web-Based instruction for students with disabilites. Sixteen students with disabilites and their WBI personnel at a mid-western university in US were recruited for individual interviews. The results showed that WBI personnel did not know about Web accessibility and were not well prepared to make their WBI accessible. They have to provide the equality and quality of life to students with disabilites by making their instruction accessible. They felt that they could not guarantee whether their WBI was accessible even after meeting current standards and guidelines. WBI personnel also suggested that they had to provide students with disabilites with various methods and use appropriate instructional design strategies in order to address their needs. Finally, some effective instructional design used by WBI personnel in order to make WBI accessible were listed.

• Journal of KIISE:Databases
• /
• v.34 no.5
• /
• pp.409-419
• /
• 2007

Database community focuses on the similar music retrieval systems for music database when a humming query is given. One of the approaches is converting the midi data to time series, building their indices and performing the similarity search on them. Queries based on humming can be transformed to time series by using the known pitch detection algorithms. The recently suggested algorithm, scaled and warped matching, is based on dynamic time warping and uniform scaling. This paper proposes Humming BIRD(Humming Based sImilaR mini music retrieval system) using sliding window and center-aligned scaled and warped matching. Center-aligned scaled and warped matching is a mixed distance measure of center-aligned uniform scaling and time warping. The newly proposed measure gives tighter lower bound than previous ones which results in reduced search space. The empirical results show the superiority of this algorithm comparing the pruning power while it returns the same results.

• Journal of Environmental Impact Assessment
• /
• v.27 no.3
• /
• pp.241-250
• /
• 2018

Recently, negative effects on human health such as disease caused by harmful environment have been dealt with seriously. In particular, studies on the effect of radon exposure, which is known as a primary carcinogen in lung cancer due to radioactive materials, have been actively studied. In Korea, since January 1, 2018, radon measurement is mandatory when building a new apartment, so it is necessary to measure the radon concentration and submit it to the local government and it should be posted where residents can see it. Radon has only recommended standards for multi-use facilities, but now it has decided to set recommendation standards for private homes. Therefore, it should now be possible to manage the radon in the environmental impact assessment phase as well as in the Post-environmental Impact Assessment. It should be possible to share health information such as the radon concentration and the risk of radon, and participation of health experts in the environmental impact assessment stage is required. Soil, air quality, hygiene and aerial items should be improved to take into account the effects of radon on human health during the environmental impact assessment process. If the level value of conncentration of radon shows above the recommended level, then alternative measures should be prepared and mitigation measures should be prepared as well.

• Journal of Internet Computing and Services
• /
• v.16 no.1
• /
• pp.1-8
• /
• 2015

Ultra-wide-angle wireless endoscopes are demonstrated in this paper. The endoscope is composed of an ultra-wide-angle camera module and wireless transmission module. A lens unit with the ultra-wide FOV of 162 degrees is designed and manufactured. The lens, image sensor, and camera processor unit are packaged together in a $3{\times}3{\times}9-cm3$ case. The wireless transmission modules are implemented based on UWB- and WiFi-based platform, respectively. The UWB-based module can transmit HD video to a computer in resolution of $2048{\times}1536$ (QXGA) and the frame rate of 15 fps in MJPEG compression mode. The maximum data transfer rate reaches 41.2 Mbps. The FOV and the resolution of the endoscope is comparable to a medical-grade endoscope. The FOV and resolution is ~3X and 16X higher than that of a commercial high-performance WiFi endoscope, respectively. The WiFi-based module streams out video to a smart device with th maximum date transfer rate of 1.5 Mbps at the resolution of $640{\times}480$ (VGA) and the frame rate of 30 fps in MJPEG compression mode. The implemented components show the feasibility of cheap medical-grade wireless electronic endoscopes, which can be effectively used in u-healthcare, emergency treatment, home-healthcare, remote diagnosis, etc.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.12B
• /
• pp.1556-1564
• /
• 2011

The increased life expectancy of human due to the advance of medical techniques has led to many social problems such as rapidly aging populations, increased medical expenses and a lack of medical specialists. Thus, studies on improving the quality of life with the least amount of expense have been going on by incorporating advanced technologies, especially for Personal Health Devices (PHDs), into the medical service market. However, compatibility and extensibility among manufacturers of PHDs have not been taken into account in most of the researches done on the development of PHDs because most of them have been supported by individual medical organizations. The interoperability among medical organizations can not be guaranteed because each medical organization uses different format of the messages. Therefore, in this paper, an expansion module that can enable commercially-available non-standard PHDs to support the IEEE 11073, and a smart-phone-based manager that can support easy and comprehensive management on receiving and transmitting the collected data from each PHD using IEEE 11073 standard were developed. In addition, a u-health system that can transmit the data collected in the manager using the standard data format HL 7 to medical center for real-time medical service from every medical institutions that support this standard was designed and developed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.6C
• /
• pp.349-354
• /
• 2011

Passive millimeter wave imaging has the capability of detecting concealed objects under clothing. Also, passive millimeter imaging can obtain interpretable images under low visibility conditions like rain, fog, smoke, and dust. However, the image quality is often degraded due to low spatial resolution, low signal level, and low temperature resolution. This paper addresses image registration and fusion between passive millimeter images and visual images. The goal of this study is to combine and visualize two different types of information together: human subject's identity and concealed objects. The image registration process is composed of body boundary detection and an affine transform maximizing cross-correlation coefficients of two edge images. The image fusion process comprises three stages: discrete wavelet transform for image decomposition, a fusion rule for merging the coefficients, and the inverse transform for image synthesis. In the experiments, various types of metallic and non-metallic objects such as a knife, gel or liquid type beauty aids and a phone are detected by passive millimeter wave imaging. The registration and fusion process can visualize the meaningful information from two different types of sensors.

• Journal of Korea Society of Industrial Information Systems
• /
• v.23 no.2
• /
• pp.63-73
• /
• 2018

Academia and research institutes mainly use qualitative methods that rely on expert judgments to understand and predict research trends and science and technology trends. Since such a technique has the disadvantage of requiring much time and money, in this study, science and technology trends were predicted using keyword network analysis. To that end, 13,618 AI (Artificial Intelligence) patent abstracts were analyzed using keyword network analysis in three separate lots based on the period of the submission of each abstract: analysis period 1 (January 1, 2002 - December 31, 2006), analysis period 2 (January 1, 2007 - December 31, 2011), and analysis period 3 (January 1, 2012 - December 31, 2016). According to the results of frequency analyses, keywords related to methods in the field of AI application appeared more frequently as time passed from analysis period 1 to analysis period 3. In keyword network analyses, the connectivity between keywords related to methods in the field of AI application and other keywords increased over time. In addition, when the connected keywords that showed increasing or decreasing trends during the entire analysis period were analyzed, it could be seen that the connectivity to methods and management in the field of AI application was strengthened while the connectivity to the field of basic science and technology was weakened. According to analysis of keyword connection centrality, the centrality value of the field of AI application increased over time. According to analysis of keyword mediation centrality during analysis period 3, keywords related to methodologies in the field of AI application showed the highest mediation value. Therefore, it is expected that methods in the field of AI application will play the role of powerful intermediaries in AI hereafter. The technique presented in this paper can be employed in the excavation of tasks related to regional innovation or in fields such as social issue visualization.