• 한국정밀공학회지
• /
• 제19권4호
• /
• pp.52-72
• /
• 2002

• 한국정밀공학회지
• /
• 제17권6호
• /
• pp.185-191
• /
• 2000

Recently, a slightest influence to the circuit can be a great damage because the size of semiconductor smaller. It must be controlled the chippingless dicing process and the precision dicing without any damage to tile circuit. In this study, the relationship between chipping effect and the force of dicing was analysed. The rate of chipping was decreased as the farce of dicing decreased. It was also examined that the farce of dicing decreased according to the lower feed rate and higher blade speed. The lower feed rate and the higher blade speed must be controlled to achieve the chippingless process.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.1016-1019
• /
• 2005

In the cutting of plate steel, the quality of the cut surfaces is strongly dependent on the cutting condition such as cutting speed, plate thickness, power, kerf width and gas pressure etc. The cutting tests of Steel Automobile Press Hot were carried out using $CO_2$ Laser cutting machine. The kerf width and surface roughness of a section are examined at various cutting conditions. This paper deals with cutting characteristics of Steel Automobile Press Hot(SAPH400) using $CO_2$ Laser Cutting Machine.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.947-951
• /
• 2002

During the hotwire cutting of EPS foam sheet, the dimensional accuracy and part quality of the cut par are highly dependent upon the thermal field in the EPS. The thermal field is determined by operating parameters such as heat input, cutting speed and cutting angle. The objective of this study is to investigate into the influence of cutting angle on the kerfwidth and part quality of the cut part in hotwire cutting of EPS foam using the experiments and the numerical analysis in the case of a single sloped cutting. In order to estimate an accurate temperature field, the transient thermal analysis using a moving coordinate system and the sloped heat flux model is carried out. From the results of the experiments and the analysis, it has been found that the effect of cutting angle on the kerfwidth and the melted area at the edge are 0.1 mm and 0.11 m$m^2$ respectively. The results of the experiments show that the surface roughness is not appreciably influenced by the cutting angle.

• 한국산학기술학회논문지
• /
• 제11권6호
• /
• pp.1955-1960
• /
• 2010

CNC 3축 파이프 형상절단기의 성능은 이송계의 위치결정 정밀도와 공작물의 가공 정밀도를 측정하고 검증함으로써 평가되었다. 위치결정 정밀도는 PLC의 모션 컨트롤러에 의하여 구동된 이송 거리와 레이저 간섭계를 이용 한 실제 이송 거리를 측정 비교하여 오차를 확인하였다. 그리고 가공 정밀도는 절단된 공작물을 스캐닝하고 3D 모델링하여 가공형상을 확보하고, 절단궤적에 해당하는 CL 데이터와 비교하여 오차를 확인하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1991년도 춘계학술대회 논문집
• /
• pp.77-86
• /
• 1991

레이저 빔이갖고있는 spatial coherence 특성에 의해서 렌즈를 이용하여 집광시키면 집광부에서 고출력 밀도를 얻을 수 있다. 이와같이 집광된 레이저 빔을 재료의 표면에 조사하면 재료로 부터 미세량을 용융, 증발시키므로 일반적인 방법으로는 가공이 어려운 단단한 재료의 절단과 미세 구멍가공이 가능하게된다. 본 논문에서는 출력, 펄스 수, defoucsing, pulse on-time, 보조가스 압력등을 변화 시키면서 드릴링 실험을 수행하고, 각 실험 조건에서의 구멍 형상과 깊이를 측정함으로써 가공 변수들의 process sensitivity를 평가하였다.

• 한국정밀공학회지
• /
• 제21권6호
• /
• pp.77-83
• /
• 2004

Cutting by a high speed laser cutting machine is one of most effective technologies to improve productivity. This paper has studied to obtain the cutting characteristics and optimal cutting conditions in a high speed feeding type laser cutting machine by Tacuchi method in design of experiments. A Lf(34) orthogonal array is adopted to study the effect of adjustment parameter. The adjustment parameters consist of cutting speed, laser power, laser output duty and assistant gas pressure. And the quality feature is selected as surface roughness of sheet metal. Variance analysis is performed in order to evaluate the effect of adjustment parameters on the quality feature of laser cutting process.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2002년도 추계학술발표논문집
• /
• pp.260-262
• /
• 2002

제품의 소재를 미리 테입 형태로 만들어 단면의 경계면을 따라 레이저로 절단하여 적층하는 방식은 제품의 표면에 계단 모양의 무늬가 생기므로 정밀한 제품을 제작하는데 어려움이 있었다. 이를 극복하기 위하여 단면의 경계선을 절단할 때 수직으로 절단하는 것이 아니라 경사면을 따라 절단하여 전체적인 제품의 옆면이 부드럽게 연결되는 경사절단형 임의형상가공시스템을 개발하였다. 이를 위하여 레이저 5축 경사절단기를 개발하였는데, x축과 y축은 상용화되어 있는 x-y table을 이용하였고 z축은 한 개의 z축 이송대를 이용하였다. 롤과 피치를 위하여는 서보모터 두 개를 이용하여 작업대가 회전할 수 있도록 하였다. 이와 같은 레이저 5축 경사절단기를 개발함으로써 시편의 어느 위치에서든 어느 각도로도 절단이 가능하게 할 수 있었다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.176-180
• /
• 2002

All types of VLM-s process include the linear heat cutting of EPS foam to generate a layer with 3D shape. The dimensional accuracy and part quality of the cut part are dependent on the thermal characteristics in the EPS foam. The thermal characteristics are determined by operating parameters such as an effective heat input and cutting angle. The objective of this study is to investigate into the influence of cutting angle on the kerfwidth and the melted length of the cut part using the numerical analysis and the experiments in generally sloped cutting with two cutting angles. In order to estimate an accurate temperature field, the transient thermal analysis using moving coordinate system, the fully conformed mesh and the heat flux model with two cutting angles is carried out. From the results of the analysis and the experiments, it has been found that the influence of the rotational angle about x-axis in which the rotational axis is normal with hotwire cutting direction is appreciably negligible in comparison with that of the rotational angle about y-axis.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.393-396
• /
• 2000

Spent fuel rod cutting device should cut a spent fuel rod to an optimal size in order to fast decladding operation. In this paper, for developing spent fuel rod cutting device with cutter blade, rod properties such as dimension and material of zircaloy tube and fuel pellet are investigated at first and then, various methods of existing cutting devices used commercially are investigated and their performance are analyzed and compared. This device is designed to be operated automatically via remote control system considering later use in Hot-Cell (radioactive area) and the mdularization in the structure of this device makes maintenance easy. SUS and Zircaloy-4 are selected as cut material used in the test of spent fuel rod cutting device by cutter blade. In order for constructing the high durable cutter blade, various materials are analyzed in terms of quality, shape, characteristic, and heat treatment, etc. and from these results, spent fuel rod cutting device is designed and manufactured based on the considerations of durability, round shape sustainability of rod cross-section, debris generation, and fire risk, etc.