• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.808-811
• /
• 2002

In thixoforming process, the size of Si particles is changed by many parameters of forming. Especially, reheating and heat treatment are very important parameters. It was found that the mechanical properties was significantly improved by the thixoforming process. In this study, to investigate the relation between the mechanical properties and Si particles, the experiment of semi-solid die casting has been performed. Large suspension part with A356 alloy was fabricated with controlled ram speed. The effect of the size and shape of silicon particles on microstructure of tensile test has been investigated.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.250-250
• /
• 2004

자동차의 시동을 걸기 위해서는 맨 처음 엔진을 강제로 가동시키는 기계장치가 있어야 하며, 이를 시동모터라 한다. 시동모터는 모터부와 그 부속장치 그리고 발생된 힘을 엔진으로 전달하는 동력전달 기구로 구성되어 있다. 동력전달기구는 플라이 휠이라는 부품을 크랭크 축 끝단에 장착한 후 그 원주상에 링 기어를 만들고, 시동모터의 축에 피니언이라는 작은 기어를 맞물리게 하여 시동 키를 돌리면 이 기어가 회전되는 원리를 이용하고 있다. 피니언 기어는 작고 반대로 플라이 휠에 장착되어 있는 링 기어는 크기 때문에 일정한 기어비가 형성되어 큰 부하의 엔진회전이 가능하다.(중략)

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.11
• /
• pp.140-148
• /
• 2004

Tight integration of product design and process planning in the early design stage would make bigger impact as wider spectrum of design and manufacturing alternatives can be pursued and evaluated. Thus the development of systematic computer-based supporting for this integration if desirable. For this integration and process planning in the early design stage, the systematic method to synthesize shape of part from functional requirements is crucial. This research presents the methods of functional decomposition from overall function of product and synthesizing shape of part based on functional relations extracted from functional decomposition using planetary gear transmission system as an example.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.4
• /
• pp.126-135
• /
• 1997

A sensorless motion planner which succeeds in grasping a polygonal part firmly into a desired orientation has been developed through the dynamic analysis. The analytical results on the impact process with friction are used for modeling the contact motionduring the parallel-jaw grasp operation, which is com- posed of the pushing and the squeezing process. The developed planner succeeds in grasping a part into a specified orientation in the face of uncertainties of initial position and orientation of the part, motion direction of the finger, and the physical parameters such as the coefficients of friction and restitution. The motion planner has been fully implemented into a viable package on the computer system, and verified experimentally. The motion of parts is recorded using a high-speed video camera, and then compared to the results of the planner and the graphic simulation results that illustrate the simulated motion of the grasp operation.

• 기계와재료
• /
• v.23 no.3
• /
• pp.96-113
• /
• 2011

녹색기술 및 친환경 공정의 필요성이 급증함에 따라 재료이용률 향상을 지향하는 차세대 압출공정의 대두가 필요하게 됨에 따라 유압 CNC(Servo) 제어를 이용한 가변단면 압출기술을 개발하게 되었다. 이러한 가변단면 압출(Varied section extrusion, VSE)기술은 공정 중에 압출구를 빠져 나가는 소재의 단면 형상을 변화시켜 재료이용률을 향상을 도모하였으며, 후가공 공정의 생략도 가능하여 국내 압출업체의 생산원가 절감 및 글로벌 기술경쟁력 확보에 큰 도움을 줄 수 있을 것이다. 아직은 소수의 선진국에서 시도한바 있으나 양산품 적용에는 생산원가 및 생산속도, 상품성 등에 문제가 있어 자동차 부품 적용에 한계를 보이고 있는 기술이다. 따라서 본 연구팀이 가변단면 압출용 금형을 포함한 최적의 압출공정 및 양산성 문제의 해결점을 거의 확보하고 있는 단계로 세계를 선도하는 리딩기술(Leading technology)을 보유하게 됨으로써 국가의 기술경쟁력 향상에 중요한 역할을 수행할 수 있을 것이다. 본 연구의 내용을 요약하여 정리해 보면 첫째로는 CNC 제어 가변단면 압출공정에 대하여 자세하게 소개하고 특징 및 장 단점을 설명하였으며, 자동차 부품군에로의 적용에 많은 이점들을 갖고 있음을 설명하였다. 두 번째로는 가변단면 압출을 위한 이동 금형(Moving die)부품을 갖는 구조의 압출금형에 관하여 기존의 압출금형과 비교하여 설명하였으며, 가변단면 압출용 금형의 구조 및 메커니즘의 최적화를 이루고자 하였다. 세 번째로는 가변단면 압출공정을 실현하기 위한 CNC 제어 압출시스템에 대하여 간략히 설명하였다. 네 번째로는 자동차 부품 적용을 위한 정밀 압출공정으로서 가변단면 압출공정에 대하여 유한요소해석을 통하여 가변단면 압출공정 변수 및 금형 변수 등에 대한 엄격한 검토를 선행적으로 수행하여 양산성 확보를 위한 정보들을 분석 정리하였다. 끝으로는 세 가지 단면형태를 갖는 가변단면 압출제 시제품에 대하여 CNC 제어 가변 단면 압출공정의 상용화 가능성을 확인 적용성 검토를 완료하였다. CNC 제어 가변단면 압출기술은 압출공정에 있어서 많은 경험과 기술적 검토가 선행되어져야 하는 고부가가치 성형공정으로써 재료 이용률을 획기적으로 향상시킬 수 있는 압출공법으로 향후 자동차 부품 뿐만아니라 다양한 알루미늄 제품군에 적용이 가능하다고 판단된다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.4 s.175
• /
• pp.811-823
• /
• 2000

In design and manufacturing airframe structures which are composed of a lot of sub-assemblies and large complex profile shapes it is difficult to reduce so called hardware variations. Accordingly cost increasing factors for manufacturing airframe parts are much more than other machine parts because of the variability of fabricated details and assemlies. To improve cost and quality, accurate assembly methods and DPD techniques are proposed in this paper which are based upon using CAD/CAM techniques, the concept of KC's and the coordinated datum and index throughout the design, tooling, manufacturing and inspection. The proposed methods are applied to produce fuselage frame assemblies and related engineering aspects are described regarding the design of parts and tools in the context of concurrent digital definition. First articles and consequent mass production of frame assemblies shows a great improvement of the process capability ratio from 0.7 by the past processes to 1.0 by the proposed methods in addition to the cost reduction due to the less number of tools, reduced total assembly times and the space compaction needed by massive inventory. The need to achieve better Cpk, however, and future studies to be investigated will be addressed briefly.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.11
• /
• pp.132-142
• /
• 1996

This paper presents a technique to model and control a manipulator which has a flexible link and moves in a vertical plane. The flexible link is modeled as an Euler-Bernoulli Beam. Elastic deformation of the flexible link is represented using the assumed modes method. A comparison function which satisfies all geometric and natural boundary conditions of a cantilever beam with an end mass is used as an assumed mode shape. Lagrange's equation is utilized for the development of a discretized model. This paper presents a simple technique to improve the correctness of the developed model. The final model including the shortening effect due to elastic deformation correlates very well with experimental results. The free body motion simulation shows that two assumed modes for the representation of the elastic deformation is proper in terms of the model size and correctness. A control algorithm is developed using PID control technique. The proportional, integral and derivative control gains are determined based on dominant pole placement method with a rigid one-link manipulator. A position control simulation shows that the control algorithm can be used to control the position and residual oscillation of the flexible one-link manipulator effectively.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.5
• /
• pp.53-59
• /
• 1996

Warm deep drawing of single-action dies using local heating has appeared to be an alternative attractive production method of multi-operation die sets generally used at room temperature in deep drawing of rectangular cup. Uniaxial tensile tests and deep drawing tests of various materials are carried out and the effect of temperature on tensile properties and drawability are examined at temperatures up to 200 .deg. C under three kinds of lubricants of teflon film, vinyl film and drawing oil. Good formability is achieved when punch and die temperature were differentiated intentionally in order to get large tensile strength(TS) at punch shoulder protion and small TS at die side. Throughout the experiments, it has been shown that the limiting drawing height of STS316L was increased with heating die and blank holder at 100 .deg. C, but that of STS430 wasn't. When vinyl or teflon film was attached on the plates, the drawability was increased considerably.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.11 no.1
• /
• pp.110-117
• /
• 1987

A new kinematically admissible velocity field for a generalized three-dimensional flow is introduced, in which the flow is bounded by an analytic die-profile function. Then, by applying the upper-bound method th the velocity field, the flow patterns as the upper-bound method are obtained. Extrusion of elliptic sections from round billets is chosen as a computational example. Computation and experiments are carried out for work-hardening material such as aluminum alloy 2024. In order to visualize the plastic flow, the grid marking technique is employed. The theoretical predictions both in extrusion load and deformed pattern are in good agreement with the experimental data.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.7
• /
• pp.1348-1356
• /
• 2002

The present work concerns the optimal design for injection molding processes by using the design of experiments (DOE) and numerical analysis. The DOE approaches is planned to be able to consider two-way interaction, and have been applied progressively for both mold design and process design. Numerical analyses have been carried out as a design of experiments for mold parameters such as runner specifications and cooling channel configurations. In order to determine optimal process parameters, experiments have been performed for various process conditions with the DOE scheduling. As a result, the quality and productivity of the product have been improved, and the proposed approach can be successfully reflected on the industrial injection molding process of precision electronics parts.