• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.5
• /
• pp.97-102
• /
• 2018

In this paper, W-band Waveform Generator for compact radar has been designed and fabricated. DDS (Direct Digital Synthesizer) is applied to generate CW (Continuous Wave) and FMCW (Frequency Modulation Continuous Wave) waveform at high speed. We designed two LO (Local Oscillator) paths for functions of distance delay and distance tracking tests at the prpposed system without extra test equipment. Two mode selections are provided by switch. It is observed that fabricated waveform generator performs -91 dBc/Hz phase noise at offset 1 kHz and -63.2 dBc spurious. Proposed W-band Waveform Generator is expected to apply for W-band compact radar transceiver module.

• Current Industrial and Technological Trends in Aerospace
• /
• v.5 no.2
• /
• pp.58-66
• /
• 2007

지상, 항공 및 우주를 이동하는 모든 물체는 반드시 자신의 자세를 결정하기 위해서 여러 가지 센서들을 장착하여 그 신호를 이용해서 자동 항법, 유도 및 제어를 수행한다. 이때, 동역학 특성이 빠른 시스템들은 반드시 각속도를 측정할 수 있어야 하는데 이를 해결하는 장비가 자이로인 것이다. 본 논문에서는 다양한 자이로를 소개하며 그 원리와 성능 그리고 적용 분야에 이르기까지 현황을 집중 분석하고 특히 세계적인 자이로 개발업체를 소개하면서 그 업체가 보유하고 있는 제품들을 일부 소개한다. 자이로는 초창기 김벌 시스템을 이용한 관성원리를 적용한 것부터 시작하여 현재는 광학 시스템을 적용한 RLG 및 FOG 자이로가 많은 분야에서 사용되고 있고, 최근 새롭게 부각되어 개발을 시작하고 있는 MEMS 자이로가 있는데 아직 우주 비행체 분야에서는 적용되지 못하고 있다. 그리고, 자이로의 큰 범주로 다루어지지는 않지만 자기력을 이용해서 회전체인 로터와 고정체인 플랫폼 사이에 기계식 접촉이 전혀 없는 새로운 시스템인 ESG 자이로도 일부 상용으로 생산되고 있다. 현재까지는 기계식 자이로의 정밀도 및 안정성이 광학식 자이로보다 우수하여 많이 사용되고 있지만 최근의 개발 추세로 보면 곧 광학식 자이로의 강세가 두드러질 것으로 보인다.

• Journal of Korean Society for Geospatial Information Science
• /
• v.1 no.2 s.2
• /
• pp.97-104
• /
• 1993

The Cadastre assumed as one of the most important Part of GIS has the highest priority in GIS model and Organization of the Cadasual embraces the modern methods of gaining and collecting geometric type cadastral data concerning on the land and it's ownership. Geneally, the measurement of the topologigraphic map offers great convenience for the architects to device. But the graphic precision of the value from the map is too low for many users, the large scale digital map as well as cadastral map can solve these problems. So it is necessary to get the coordinates of the characteristic points and the graphic information. In this paper, for calculating the point of measured element such as distance, and it's adjustment. This paper dicusses the methodes also, the combination of GIS data and Cadastral data and the geo-reference system, topology, data system, data modeling and so on.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.19 no.2
• /
• pp.147-154
• /
• 2001

The development of equipments which are for the collection and processing of digital images in digital photogrammetry is actively performed at the research about practical use. The close-range digital photogrammetry is widely using to determine accurate position, feature, and size of objects. The goal of this study is to judge the precise surveying possibility of a streamline object, like a vehicle, using digital close-range photogrammetry. The standard deviation of the calculated coordinates is respectively ${\sigma}_x$=0.434mm, ${\sigma}_y$=0.619mm, ${\sigma}_z$=0.387mm. The result values is enough to converge an accuracy required for the field of an automobile design. Therefor we suggest that the digital close-range photogrammetry could be use for the majority of industries.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.13 no.4
• /
• pp.303-310
• /
• 2008

Recently, IEC 61850 supports the standardized communication technique in both station bus and process bus, and presents substation automation model. In order to implement the IEC 61850 based communication in a substation using the MU (merging unit) which is one of the important data acquisition equipments in substation automation, the time synchronization is demanded for cooperative operation between the devices. This paper proposes the precision time synchronization technique using IRIG-B protocol to develop the MU under IEC 61850 communication protocol. The proposed technique is implemented and its performance is verified experimentally.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.8 no.6
• /
• pp.512-518
• /
• 2003

Position controls are very important in semiconductor manufacturing devices, machine tools Precision measuring instruments, etc. To measure the distance of movement of moving objects in minute units and the accuracy of measurement for the moving distance in these devices affect the performance of the whole devices. Therefore, in those Precision instruments, a sensing device that can measure the distance of movement with high-precision resolution is required. In this paper, a novel encoder of digital and analog hybrid type is proposed. It is shown that from this experiment a high-resolution angle measurement device can be designed by a low cost incremental encoder.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.383-383
• /
• 2015

하천의 하상고 측량은 하상변동 분석, 서식처 구조 등을 이해하는데 매우 중요한 정보를 제공한다. 하지만, 현재까지 대부분의 하상고 측량은 일정한 간격의 하천 단면 측량에 의해서 행해져 왔다. 최근 GPS와 다중 빔 측심기를 이용하여 하상의 3차원적 형상을 조밀하게 측량하고 있으나 비용이 많이 들기 때문에 긴 하천 구간을 전부 측량하지는 못하고 특정한 부분에 대해서만 집중하고 있다. 항공 LiDAR의 경우 넓은 지역에 대해 신속하고 고해상도로 지형을 측량할 수 있으나 수중 투과 장비가 고가이며, 일반 적색 레이져 기반 LiDAR는 수중을 측정하지 못하여 하상 측량에 한계가 있다. 이에 대한 대안으로 활용할 수 있는 방법은 광학 기반의 원격 탐사에 의한 수심 측량 방법이다. 이 방법은 얕은 수심의 하천에 대한 활용되었는데, 광학 센서 이미지나 항공사진 등을 이용한다. 본 연구에서는 저고도에서 촬영한 고해상도 디지털 항공사진을 이용하여 모래하천의 수심을 추정하였다. 이 방법은 항공사진의 적색 및 녹색 색상값과 현장에서 정밀한 측위 하에 측량한 수심값 사이의 관계를 이용한다. 이를 통해 보정식을 수립하고 검사 자료를 이용하여 검증한 후 항공사진의 해당 지역에 대해 수심 부분을 마스킹 처리하여 하상고를 구축하였다. 검사 자료에 대한 RMSE는 약 12 cm로 나타났다. 이를 활용하여 대상 구간의 3차원적 지형 형상을 구축하였다.

• Journal of IKEEE
• /
• v.18 no.4
• /
• pp.544-551
• /
• 2014

This paper suggests an algorithm to measure low-level radiation by radiation measuring devices, and the other algorithm to improve reaction speed of the device to better respond to dramatic changes in radiation amount. The former algorithm to improve the accuracy of measuring low-level radiation takes advantage of a dual window radiation measurement method which is based on accumulated average of pulses gathered by a radiation measuring sensor. The latter algorithm is to enhance reaction speed of a measuring device to more sensitively react to dramatic changes in radiation amount by adopting a dual window radiation measurement method which analyzes data patterns newly put into for six seconds. To verify the suggested algorithms, a hardware-which consists of sensor and high-voltage generator, controller, charger and power supply circuit, wireless communication part, and display part-was used. Tests conducted on the dual window radiation measurement method as used in the suggested algorithm have proved that accuracy improves to measure low-level radiation of 5uSv/h, and linearity also gets better. Other tests were conducted to see whether the suggested algorithm enhances the reaction speed of a radiation measuring device so that the device responds better to dramatically changing radiation amount. The experimental results have shown meaningful changes in numbers after six seconds. Therefore, the conclusions are made that the algorithm enhances the reaction speed of the device.

• Journal of Conservation Science
• /
• v.28 no.2
• /
• pp.101-112
• /
• 2012

The Donggwanwangmyo Shrine was built in the period of Joseon Dynasty in 1602. There are Clay Statues (Gwanwo, Jangbi, Woojanggun, Juchang, Jojaryoung and so on) enshrined in the inside of the main hall. Original color of these Clay Statues are deteriorated by inorganic pollutant like dust. And the origanal forms were damaged during several process of restorations and repaintings. This study carried out XRD, SEM-EDS, P-XRF and chromaticity measurement for characterization of pigments which painted on Clay Statues. As a result, cinnabar, hematite and red lead were used to paint in pigments for the red and brown colors. Light red pigment was made by gypsum with these minerals that make colors. Graphite and gold were used to color of black and gold pigment, respectively. Green pigment is identified of malachite, atacamite and glauconite. Blue pigment which is clearly painted on Clay Statues is interpreted a morden industrial pigment that were painted at repair work. White pigments are detected calcite, gypsum and silver white. Orpiment and litharge were used to color of yellow and light yellow pigment.

• Journal of Biomedical Engineering Research
• /
• v.21 no.3 s.61
• /
• pp.303-309
• /
• 2000

An accurate quantitative biomechanical evaluation for the spasticity caused by the disorder of central nervous system was made in this study. A sudden leg dropper was designed to generate objective testing environment at every trial. 3-dimensional motion analysis system(Elite. B.T.S. Italy) was used to measure kinematic data which were angle. and angular velocity of a lower limb. A program was developed to analyze the kinematic data of lower limb motion. and dynamic EMG data at the same time. To evaluate spasticity quantitatively. total 26 parameters including 14 parameters newly driven were analyzed, and statistical analysis were made for bilateral correlations. Results showed possibility to make accurate quantitative and objective evaluation for spasticity with various new parameters using new devices and program.