• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.28 no.2
• /
• pp.289-295
• /
• 2010

Yangsan fault system is a large fault more than 170km and one of the important structures Geologically that has been create recently in the Korean Peninsula. Debates have been made incessantly and widely throughout the Yangsan fault system because it's a lot of earthquake record. In this study, GPS data that was received from Yangsan GPS station in were processed by the Precise Point Positioning and the movement velocity was calculated by the statistical process about the results, where is the fault zone. The results showed that Yangsan is moving by azimuth angle of $126^{\circ}$ and the velocity of 49mm/year. It is respected that this results will be utilized in basic data about geophysics.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.26 no.5
• /
• pp.529-536
• /
• 2008

Researches about 3-D Positioning system using GPS were carried out many-sided by national organs, laboratories, the worlds of science. And most of researches were development of relative positioning algorithm and its applications. Relative positioning has a merit, which can eliminate error in received signals. But its error increase due to distance of baseline. GPS absolute positioning is a method that decides the position independently by the signals from the GPS satellites which are received by a receiver at a certain position. And it is necessary to correct various kinds of error(clock error, effect of ionosphere and troposphere, multi-path etc.). In this study, results of PPP(Precise Point Positioning) used Bernese GPS software was compared with notified coordinates by the NGII(National Geographic Information Institute) in order to analyze the positional accuracy of permanent GPS sites. And the results were compared with results of AUSPOS - Online GPS Processing Service for comparison with relative positioning.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.38 no.4
• /
• pp.391-399
• /
• 2020

Autonomous driving can be limited by only using sensors if the sensor is blocked by sudden changes in surrounding environments or large features such as heavy vehicles. In order to overcome the limitations, the precise road-map has been used additionally. In korea, the NGII (National Geographic Information Institute) produces and supplies high definition map for autonomous vehicles. Accordingly, in this study, errors occurring in the process of e data editing and dtructured esditing of high definition map are systematically typed providing by the National Geographic Information Institute. In addition, by presenting the error search process and solution for each situation, we conducted a study to quickly correct errors in high definition map, and largely classify the error items for shape integrity, spatial relationship, and reference relationship, and examine them in detail. The method was derived.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.34 no.1
• /
• pp.11-19
• /
• 2016

Recently, global companies are developing the automobile technologies, converged with state-of-the-art IT technologies for the commercialization of autonomous vehicles. These autonomous vehicles are required the accurate lane information to enhance its reliability by controlling the vehicles safely. Hence, the study planned to examine possibilities of applying UAV photogrammetry of high-resolution images, obtained from the low altitudes. The high-resolution DSM and the ortho-images were generated from the GSD 7cm-level digital images that were obtained and based on the generated data, when the positions information of the roads including the lanes were extracted. In fact, the RMSE of verifying the extracted data was shown to be about 15cm. Through the results from the study, it could be concluded that the low alititude UAV photogrammetry can be applied for generating and updating a high-accuracy map of road areas.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.364-364
• /
• 2017

미계측 유역에서의 홍수위 예측을 위해서는 실제 지형에 가까운 하천 지형 자료의 취득이 필수적이다. 대부분의 경우 하천 지형 자료는 하천정비기본계획을 위한 횡단 측량 자료를 활용하고 있으나, 지방 하천 및 농촌의 소하천은 하천 단면 측량 자료가 존재하지 않는 경우가 많아 홍수위 모의에 어려움이 있다. 기존의 하천 단면을 추정하는 연구는 기 측정된 자료를 기반으로 미계측 된 구간 사이를 세밀하게 보간하는 기법을 제시하거나 최신의 장비 등을 활용하여 고도로 정밀한 측량 기법 등을 제시해왔다. 그러나 이러한 방법들은 유역의 전 구간에 대한 하천 단면을 추정하기에는 한계가 있으며, 소하천에 고도로 정밀한 측량 기법을 적용하기에는 시간과 비용의 과다한 소모가 우려된다. 이에 따라, 비교적 간단한 방법으로 유역의 전 구간에 대해 하천의 폭으로 하천 단면의 높이와 넓이를 추정하는 미측정 하천 단면 추정 기법이 개발된 바 있으나, 실제 미계측 유역에의 적용을 통한 검증은 수행되지 않았다. 본 연구에서는 미계측 유역에서의 홍수위 예측을 위하여 개발된 하천 단면 추정 기법을 적용하여, 홍수위를 모의하고 실측 수위와의 비교를 통해 단면 추정기법의 적용성을 평가하고자 한다. 이를 위해 하천정비계획을 참고하여 단면 자료가 존재하는 하천의 본류에 대하여 하천의 폭과 넓이, 높이 사이의 회귀식을 생성한 후, 지류의 미계측 유역에 적용하여 하천 단면을 추정하였다. 추정된 단면으로 부정류 흐름의 실측 홍수 사상으로 홍수위를 모의하였으며, 실측 수위와의 비교를 통해 단면 추정 기법의 적용성을 평가하였다. 본 연구를 통해 미측정 하천 단면 추정 기법의 평가 및 검증을 수행하였으며, 이를 적용하여 지방 하천 혹은 소하천 등에 대한 침수 대책 마련에 기여할 수 있을 것으로 기대된다.

• Economic and Environmental Geology
• /
• v.48 no.3
• /
• pp.205-212
• /
• 2015

We have verified applicability of UAV(Unmanned Aerial Vehicle) photogrammetry to a mining engineering. The test mine is a smectite mine located at Gyeongju city in Gyeongnam province, Koera. 448 photos over area of $600m{\times}380m$ were taken with overlapped manner using Cannon Mark VI equipped to multicopter DJI S1000, which were processed with AgiSoft Photoscan software to generate orthophoto and DEM model of the study area. photogrammetry data with 10 cm resolution were generated using 6 ground control positions, which were exported to the 3D geological modeling software to make a topographic surface object. Monitoring of amount of ore production and landsliding could be done with less than 1 hours photographing as well as low cost. A direct link between UAV photogrammetry and 3D geological modeling technology might increase productivity of a mine due to appling the topographical surface change immediately according to the mining operation.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.29 no.3
• /
• pp.237-247
• /
• 2011

As of 2011, 72 Permanent GPS Stations are installed to control DGPS reference points by the National Geographic Information Institute in South Korea. As the center of the Earth's mass continues to move, the coordinates of the permanent GPS stations become inconsistent over time. Thus, a reference frame using a set of coordinates and their velocities of a global network of stations at a specific period has been used to solve the inconsistency. However, the relative movement of the permanent GPS stations can lower the accuracy of GPS relative positioning. In this research, we first analyzed the data collected daily during the past 30 months at the 40 permanent GPS stations within South Korea and the 5 IGS permanent GPS stations around the Korean Peninsula using a global network adjustment. We then calculated the absolute and relative amount of movement of the GPS permanent stations. We also identified the optimum renewal period of the permanent GPS stations considering the accuracy of relative GPS surveying. Finally, we developed a Korean a Korean crustal movement model that can be used to improvement of accuracy.

• Spatial Information Research
• /
• v.18 no.3
• /
• pp.1-11
• /
• 2010

Recently, the construction of three dimensional spatial information of Dam reservoir area is very important part in Dam management work such as sediment survey, but it is difficult to acquire detailed terrain data because totalstation and single beam echo sounder are applied to terrain survey. This study presented method to construct detailed terrain data of Dam reservoir area using LiDAR and multi beam echo sounder. First, LiDAR survey was carried out in land zone and calibration process was applied by ground control point. And also the DEM of land zone was constructed by using algorithm, which eliminated building and vegetation class. As the result of validation of LiDAR DEM using GPS terrain survey, it was possible to construct three dimensional terrain data that was satisfied with the tolerance error of LiDAR, which was the standard error of LiDAR DEM showed as 0.108m. Also multi beam echo sounder was applied to the survey of water zone and it could construct spatial information that was satisfied with bathymetry surveying tolerance error of International Hydrographic Organization by validation with terrain survey data. And LiDAR and multi beam echo sounder data were integrated and it was possible to construct three dimensional spatial imagery information that can be applied to Dam management work such as the estimation of sediment amounts or the monitoring of terrain change by linking with high resolution orthophoto.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.30 no.6_1
• /
• pp.539-547
• /
• 2012

Volume survey for earthwork is conducted periodically at every month at large scaled construction sites for request payment for the construction. Currently, the earthwork volume is calculated on the overlapped drawing for two cross sections which were created by new and previous surveying data observed by GPS and TS. However the survey is required lots of time and expenses as it is a pin-point surveying method thus surveyors intend to get data only for the heavy undulated topographic features chosen by himself to save time and expenses. Consequently, it causes poor results due to low dense measurement as well as it's not matched with the results by another surveyors. As a result, the conflicts related in earthwork volume calculation often arises among the owner, contractors and sub contractors. In this study, we developed a method to get surveying data for fast and accurate volume calculation using 3D Mobile Laser System and conducted an application test. Also we carried out experiments for topographic survey using MLS to judge for the application additionally. The results showed that we could reduce a time for cross section survey from 48 hours to 2 hours and collected high dense data which have 0.2m interval instead of 3m interval compare with existing method. Also we could make a map which has high accuracy within 10cm in horizontal through topographic survey using MLS.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.4D
• /
• pp.407-419
• /
• 2012

It is difficult to obtain the accurate and homogeneous height information over the whole Korea due to the effect of different vertical datums have been divided into land and sea part. In this study, we tried to unify the different vertical datums using the precise spirit leveling between TBM (tidal bench mark) and BM (bench mark) in order to solve the problems caused by different vertical datums. For this, the vertical datum offsets at observed points which were calculate from leveling results and then transformation model of vertical datum will be modelled using calculated offsets along the coastal line. For suggesting the precise modelling method to vertical datum transformation, we analyzed results from various interpolation methods such as Spline and LSC method. As the results from analysis, the LSC method combined with 4-parameters trend model is more suitable for modelling the offsets between vertical datums. The final transformation model of vertical datum using the combination of LSC and 4-parameter model which provides the transformation accuracies of ${\pm}10.4cm{\sim}14.8cm$ level. And, the software for vertical datum transformation that was also developed using the final model in order to convert the height information included in various spatial data effectively. Therefore, the transformation model between vertical datums of land and sea part, which is developed in this study, is expected to minimize the confusion caused by mismatch of height information in the use of spatial data, and it also can be minimize economic and time losses in various application fields such as coastal development project, coastal disaster prevention, etc.