• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2009.04a
• /
• pp.302-303
• /
• 2009

최근 수심측량 기술의 발달로 싱글빔 수심측량기에서 정밀 다중빔 음향측심기로 진보되었으며, 이 장비를 통하여 취득된 데이터의 정확도를 확보하기 위한 연구가 다양하게 진행되고 있다. 일반적으로 수심측량 정확도는 장비의 성능 및 S/W에 의한 Calibration의 검증만 수행되고 있을 뿐, 절대측량성과에 의한 정량적인 정확도평가가 이루어지지 않고 있다. 따라서 이 연구에서는 정확도가 검증된 수위계를 이용하여 취득된 데이터의 수심별 오차를 규명하고 IHO의 수심 허용오차와 비교하여 정확도를 평가하였다. 정확도 평가 결과, 성과는 수심이 깊은 지역일수록 오차가 크게 발생하며, 수심이 낮아질수록 오차가 감소함을 알 수 있다. 또한 수위계를 이용한 성과검증시 발생된 수심별 오차를 다중빔음향측심기에서 취득된 성과에 대하여 재보정을 수행함으로 정확도 높은 성과를 취득할 수 있다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.22 no.2
• /
• pp.117-125
• /
• 2004

This paper describes the orthometric correction for determining the orthometric height obtained from height difference by precise leveling or GPS leveling. Five formulas are used to calculate the orthometric correction for two level lines as an examples. Based on the comparison results Strang van Hees' formula that use the surface gravity is better than the others to compute the orthometric corrections on spirit leveling and GPS/Leveling in an area where mean hight is high and terrain relief show high variability. Further research is necessary to improve the results of this study using Mader method, etc..

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.18 no.1
• /
• pp.75-83
• /
• 2000

This paper deals with the application of two dimensional filtering technique for strain calculation using old and new geodetic data, and discusses the characteristics of general strain pattern in terms of seismic activity and tectonics. The mean rate of maximum shear strain is $0.12{\mu}/yr$. The mean direction of principal axes distribution of the compression is about $N80^{\circ}E$.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2009.04a
• /
• pp.157-162
• /
• 2009

Korea established a King Sejong Station in King George Island in 1988. With the establishment of a station, various researches such as geology, biology, geophysics and meteorites have been conducted. Surveying and mapping has been performed since 1990, however, the results had a large errors due to old GPS instrument and autonomous positioning with SA. In this study new GPS surveying was tried using a state-of-the-art GPS instrument and relative positioning.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2010.04a
• /
• pp.211-215
• /
• 2010

This study is on the effective methods for non metric camera calibration for its use in accurate close range photogrammetric surveying. We tested four estimation methods used for calculating interior orientation parameters and two methods for building calibration field, one is using targets which have three dimensional coordinates and the other is using two dimensional grid targets. By analysing test results effective and accurate calibration methods were suggested.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.5 no.2
• /
• pp.12-23
• /
• 1987

This paper deals with the analysis and adjustment computation for the Korean 1st order levelling data obtained by the National Geography Institute from 1974 to 1986. An evaluation of the accuracy of level lines using forward/back discrepancies and adjustment residuals has been carried out. A general assessment of the network in the light of current standards with other countries is discussed. The results of this study show that systematic errors are relatively high but the accuracy of the primary levelling is good enough within the limitation of precision levelling according to International Association of Geodesy(IAG) Resolution, and therefore it is concluded that this levelling will satisfy the present mapping and engineering survey.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.8 no.2
• /
• pp.31-34
• /
• 1990

In this study, the closed errors appeared in traverse surveying are precisely adjusted in consideration of the weights both observed angle and distance. The results of this study show that the theoretical adjustment is more accurate than the compass rule or the transit rule by distribution of the observed angle errors.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.1 no.2
• /
• pp.30-41
• /
• 1983

This study aims at carrying out the precision leveling by getting the coeicffients of refraction (K) through experiment presented necessarily in the zenith distance measurements of trigonometrical leveling. Thus, the process and characteristics of seasonal and hourly variation of the coefficients of refraction (K) in the Honan district are presented in this paper, especially in the mountainous area surrounded with the Mt. Mudeung, in the coastal area of Mokpo and Yeosu district, and in the plain area of Gwangju district.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.210-210
• /
• 2023

하천에서 범람이 발생하는 위험단면을 획득하는 것은 인명 및 재산을 보호하기 위해 매우 중요하다. 이제까지는 특정단면을 현장에서 확인하여 직접측량을 통해 획득하고 이를 위험단면으로 하여 실제 하천 인근에서 홍수로 인해 가장 먼저 범람이 발생하는 위험단면과는 차이를 보일 수 밖에 없었다. 하지만 최근에 UAV(Unmanned Aerial Vehicle) 항공사진측량을 통해 3차원 정보를 획득함으로써 각 세부단면에 대한 분석이 가능해져 보다 정밀한 위험단면을 산정할 수 있다. 각 세부단면을 활용하여 시뮬레이션을 통해 위험단면을 획득한다면 이제까지 직접측량으로 획득한 위험단면보다 홍수로 인해 가장 먼저 범람하는 지점과 최소홍수량 산정이 가능하다. 본 연구에서는 UAV 항공사진측량을 통해 하천의 각 세부단면을 분석하여, 최소 홍수량에서 범람하는 위험단면을 자동으로 산정하는 연구를 진행하였다. 본 연구를 통해 소하천에서 UAV를 활용하여 자동으로 위험단면을 산정한다면 조기경보시스템 등을 설정하는것에 유용할 것으로 판단된다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.23 no.1
• /
• pp.69-76
• /
• 2005

The purpose of this study was to establish the accuracy of the industrial photogrammetry system constructed with INCA2 metric camera and V-STARS system on steel box girder measurement under industrial measurement condition. The objective of the measurement was to determine the distances of plane to plane or plane to libs, precise positions of the bolt holes and angles of the plane to plane on the steel box girder using coded targets, tape targets, edge targets and target adapters. The measurement undertaken has shown that industrial photogrammetry method were a very accurate and more importantly were produced quickly to measure the steel box girder.