• Proceedings of the KAIS Fall Conference
• /
• 2003.06a
• /
• pp.116-118
• /
• 2003

정밀주조에 사용되는 왁스형을 기존의 수작업과 금형을 이용하는 방법으로 제작하지 않고 SLS형 RP로 캐스트폼형을 만들고 여기에 왁스를 함침시켜 왁스형을 제작하는 공정을 제안하였다. 왁스형의 정밀도를 향상시키기 위해 캐스트폼형 예열시간, 왁스 함침시간, 왁스 함침 회수 등 중요한 공정변수를 변화시켜 가며 왁스형을 만들었다. 왁스형의 정밀도를 측정한 결과 예열시간이 적어도 30분 이상일 때 정밀도가 우수한 제품을 얻었으며, 왁수를 두 번이상 함침할 때 정밀도가 우수하였다. 왁스형의 표면거칠기는 예열시간이 늘어날수록 향상된 표면조도를 얻을 수 있었다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.306-306
• /
• 2004

최근 광학식 비접촉 3차원 스캐너의 측정 정밀도는 매우 빠르게 향상되고 있다. 이러한 측정정밀도의 향상으로 3차원 스캐너를 자동차나 전자제품의 인스펙션(Inspection) 툴로 활용하는 사례가 점차 늘고 있다. 3차원스캐너는 측정대상물의 곡면을 신속하게 측정하는 것이 가능하고 높은 해상도를 가지고 있다. 또한 CMM에 비하여 가격이 저렴하고 포터블하므로 향후 많은 산업분야에서 활용성이 점차 커질 것으로 기대된다.(중략)

• Proceedings of the Korea Information Processing Society Conference
• /
• 2013.05a
• /
• pp.386-388
• /
• 2013

합산 영역 테이블(Summed Area Table)을 사용하면 현재 픽셀 주변으로 임의의 사각 영역의 평균을 모든 픽셀을 읽을 필요 없이, 단 4번의 픽셀의 합과 차로 표시할 수 있다. 그러나 많은 픽셀의 값이 누적되는 경우 부동소수점 표현의 정밀도가 떨어지는 문제가 발생한다. 따라서 본 논문에서는 합산 영역 테이블의 정밀도를 향상시키기 위한 방법으로 선형 회귀분석(linear regression)을 이용한 오프셋을 사용할 것을 제안한다. 회귀분석을 통해 구축한 다항식을 통해 픽셀 그리고 채널 별로 다른 오프셋을 적용하여 정밀도를 효과적으로 향상하였다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.14 no.2
• /
• pp.199-207
• /
• 1996

According to the different baseline lengths, we quantitatively analyzed how much precision of the baseline de-termination is improved for GPS survey when using the precise ephemeris instead of the broadcast ephemeris of GPS satellites. For this research, we selected seven baselines ranging from 15 km to 201 km and performed GPS measurements more than six times for each baseline. The observed data for each baseline were processed two times with the same conditions alternately changing the broadcast and the precise ephemeris. The standard deviations from the repeated measurements for each baseline are compared between the results of using the broadcast ephemeris and the precise ephemeris. As the result, the precision, stability and reliability of the base-line determination using the precise ephemeris is better than those of using the broadcast ephemeris for all base-lines. When using precise ephemeris for the baselines longer than 65 km, the precision less than 0.1ppm is always obtained and the precision improvement rate by using the precise ephemeris is considerably greater than that for the shorter baselines. We expect that this result might be a quantative basis for the decision about what ephemeris is better for the baseline length and the demanded precision in GPS survey.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.10a
• /
• pp.193-198
• /
• 2001

생산현장 업무에서는 측정검사업무의 비중이 크다. 측정검사의 업무는 품질향상을 위한 활동이며 또한 고부가가치의 제품을 위해서도 중요하다. 고품질 고정밀도는 철저한 측정검사를 통하여 이루어진다. 제품의 치수를 정확히 측정하여 정밀도 있는 부품을 제작하고 불량부품이나 파손된 부품을 검사하여 제거함으로써 제품의 성은과 품질이 우수하게 인정된다. 이러한 측정검사작업의 정밀도향상, 생산성 향상을 위해서는 자동화가 필요하다. 측정검사의 자동화 (CAT : Computer Aided Testing)에는 영상처리를 이용하는 시각검사의 자동화가 중요한 분야이다. 영상처리를 이용한 시각검사의 대상은 결함검사, 두께검사, 형상칫수 검사, 물체의 위치, 방향, 종류의 파악 등이 있다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.267-267
• /
• 2004

엔드밀은 산업현장에서 정밀 금형과 다이 제조 시 넓게 사용되는 절삭 공구이며 공작기계의 향상에 따라 많은 발전을 거듭해 왔다 공작기계의 고속화에 따라 공작기계의 측면에서는 강성 증가, 열변형의 억제와 동적 안정성의 개선 및 응답성 개선을 통하여 정밀도를 향상시키고 이송속도와 절삭속도의 증가를 통해 생산성을 증대시키고 있으며 공구의 측면에서는 새로운 재종 및 코팅기법의 개발을 통해 공구수명의 향상을 달성하고 있다. 또한 공구형상의 최적화를 통해 동적 안정성을 확보하고 가공 정밀도를 개선하고자 하는 다양한 시도가 이루어지고 있다.(중략)

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.1
• /
• pp.79-88
• /
• 2014

Enhancing the working speed and positional accuracy of high-speed press machines is essential for improving the parts accuracy and productivity. However it is known that the positional accuracy decreases and the risk of parts failure increases as the working speed of press machine increases. Therefore predicting such problems during the stage of press structure design is necessary for precise design of high-speed press machines. In the present investigation, the dynamic-elastic deformation of press drive module parts with eccentric masses was examined by finite element analysis and experiment. Then the positional accuracy and parts failure of high-speed press machines was evaluated.

• Journal of Astronomy and Space Sciences
• /
• v.18 no.1
• /
• pp.63-70
• /
• 2001

IDGPS(Inverted Differential Global Positioning System) is one of technique improving the accuracy of GPS positioning and is mostly used for tracking an automatic vehicle. In the IDGPS, the user send it’s GPS position and related satellite information to dispatcher, and the corrections are made at the dispatcher to get corrected user position. IDGPS suffered correction degradation as the baseline become large. This problem is resolved using NIDGPS(Network IDGPS). As the experimental results are demonstrated, the improvement of position accuracy using IDGPS and NIDGPS is verified.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.29 no.1
• /
• pp.81-89
• /
• 2011

The previous land gravity data in Korea showed locally biased irregular distribution. Especially, this problem was more serious in the mountainous area where the data density was significantly low. The same problem appeared in GPS/Levelling data thus the precision of the geoid could not be improved. From 2008, new gravity and GPS/Levelling data has been collected by the unified control point and survey on the benchmark project which were funded by the national geographic information institute. The newly obtained data has much better distribution and precision so that it could be used for update precision of geoid model. In this study, the new precision geoid has been calculated based old and new gravity data and this model showed 5.29cm of precision compared to 927 points of GPS/Levelling data. And the degree of fit and precision of hybrid geoid has been calculated 2.99cm and 3.67cm. The new gravimetric geoid has been updated about 27% over whole country. And it showed 42% of precision update due to collection of new gravity data on the Kangwon/Kyeongsang area which showed quite low distribution. In 2010, about 4,000 points of gravity and 300 points of GPS/Levelling data has been obtained by unified control and survey on benchmark project. We expect that new data will contribute to updating geoid precision and veri tying precision more objectively.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.30 no.5
• /
• pp.493-500
• /
• 2012

The previous geoid model developed in early 2000s shows 14cm level of precision due to the problems on distribution, and quality of the land gravity and GPS/Leveling data. From 2007, the new land and airborne gravity data as well as GPS/Leveling data having high quality and regular distribution has been obtained. In 2011, a new gravimetric geoid model has been constructed with precision of 5.29cm which was improved about 27% comparing to the previous model. However, much more land gravity data has been collected at the control point, bench marks and triangulation points since 2010. Also, GPS/Leveling data having 10km spacing over whole country has been obtained through the project which is for the construction of new control points. In this study, new gravimetric geoid has been calculated based on the all available gravity data up to present. The geoid height shows the range from 18.05m to 32.70m over whole country and its precision is 5.76cm. The degree of fit and precision of hybrid geoid model are 3.60cm and 4.06cm, respectively. At the end, 3.35cm of the relative precision in 15km baseline has been calculated to confirm its practical usage. Especially, it has been founded that regional bias occurred at the Kangwon and coastal area due to problems on the leveling data. Also, some inland points show inconsistent large difference which needs to be verified by analyzing the unified control points results.