• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.5
• /
• pp.77-87
• /
• 1995

In-process detection of drill wear is one of the most important technoligies for automatic, unmaned machining systems. In this study, an on-line drill wear estimation model based on spindle/Z-axis motor currents generated during the drilling process is proposed. The theoretical model is obtained by integrating the drilling process model and the servomechanism model. The drilling process model describes the relationship of drill wear and drilling torque/ thrust force, whereas the servomechanism model describes the relationship of drilling torque/ thrust force applied to motor and spindle/Z-axis motor current. Evaluation tests have shown that the proposed model is a good real-time estimator for drill wear.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.2
• /
• pp.120-128
• /
• 1997

In this paper, A design strategy of the Surface Mounting Device for accurate and better performance is studied. Analytical modeling, sensitivity analysis, and optimization are being conducted. The ANSYS software and experimental method are used for the verification of the analytical equations with boundary conditions. Through the sensitivity analysis, the most dominant design parameter can be detected. The optimum design parameters for improving the given performances are selected by using the optimiza- tion algorithm. The design tool based on the design strategy for the analysis, modeling, and optimization will be useful for are-design and better improving of the SMD.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.10
• /
• pp.50-56
• /
• 1995

Chatter Vibration is an unwanted phenomenon in metal cutting and it always affects surface finish, tool life, machine life and the productivity of machining process. The real-time detection of the chatter vibration is is necessarily required to automation system. In this study, we constructed the multi-sensing system using Tool Dynamometer, Accelermeter and AE sensor. Especially, Acoustic Emission(AE) generated during turning was investigated the possibility for real-time detection of chatter vibration. Turning experiments were performed using carbide insert tip under realistic cutting conditions and tapered workpiece of SM45C. Consquently, the real-time detection using multi-sensing system can be used for Inprocess monitoring of chatter vibration.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.12
• /
• pp.100-108
• /
• 1995

The In-process minitoring of the chatter vibration is necessarily required to an automatic manufacturing system. In this study, we constructed a multi-sensing system using tool dynamoneter, accelerometer and AE(Acoustic Emission) sensor for a more credible detection of chatter vibration. And a new approach using a multiple neural network to extract the features of multi-sensor for the recognition chatter vibration is proposed. With the Back-propagation training process, the neural network memorize and classify the features of multi-sensor signals. As a result, it is shown by multiple neural network that the chatter vibration can be monitored accurately, and it can be widely used in practical unmanned system.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.5
• /
• pp.22-28
• /
• 2003

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.12
• /
• pp.11-18
• /
• 2003

• Journal of the KSME
• /
• v.24 no.6
• /
• pp.422-427
• /
• 1984

최근의 높은 생산성을 향한 NC 혹은 CNC 공작기계를 이용한 기계가공의 자동화 및 작업 공간 내부에서의 오차측정이라는 시대적 조류와 함께, 기계가공 오차의 보상 제어, 혹은 형상 및 치 수의 적응 제어(Geometric Adaptive Control, GAC)는 이미 여러 선진국가에서 주목을 받아 왔고, 병기 공학을 포함한 여러 분야에서 정밀도의 향상에 대한 요구는 높아만 가고 있어 이 방향에 대한 계속적인 연구가 요망된다. 더군다나 전자 및 광전자적인 계측 제어 기구의 발달과, 저렴 하고 높은 성능의 마이크로 컴퓨터의 등장으로 GAC를 통한 정밀도 향상은 더욱 가능하여졌다.

• Transactions of Materials Processing
• /
• v.28 no.1
• /
• pp.27-33
• /
• 2019

The effect of hardening methods and process parameters on surface hardening of a Ti-6Al-4V Alloy has been investigated in this study. To characterize the effectiveness of the respective surface hardening methods, samples of a Ti-6Al-4V alloy were self-quenched, laser-nitrided, laser-carburized, laser-carbonitrided at the same laser irradiation conditions. This experimental procedure was followed by comparing the microstructural evolutions and mechanical properties of the respective samples after the laser surface hardenings. The hardening characteristics of the respective laser surface hardenings were well defined in this study, and the hardness was significantly influenced by the reaction compounds and laser energy density.

• Journal of the Korean Society for Precision Engineering
• /
• v.10 no.4
• /
• pp.30-41
• /
• 1993

Developed in this paper is a feature based modeling system for the design of welded plat construction(WPC) which is composed of flat or bended plates represented as reference plane with a constant thickness. First, the necessity and the characteristics of the modeing system for WPC as compared with the assembly of mechanical parts are investigated. Secondly, feature library for the assembly of WPC is shown which contains several types of features like joint feature, groove feature, material feature, and precision feature. Thirdly, the assembly procedures are presented which mainly consist of both the assembly transformation and the correct assembly checking. Fourthly, weld lines of the assembled WPC are defined so that those can be used in the process planning or the manufacturing stage. Finally, a prototype by a geometric modeling software Pro/Engineer, a graphic software GL(Graphic Library), and C language on a CAD workstation IRIS.

• Journal of the Korean Society for Precision Engineering
• /
• v.10 no.2
• /
• pp.170-177
• /
• 1993

In robotic arc welding, the roll (rotation) of the torch about its direction vector does not have any effect on the welding operation. Thus we could use this redundant degree of greedom for the motion control of the robot manipulator. This paper presents an algorithm for the pseudo- inverse kinematic motion control of the 6-axis robot, which utilizes the above mentioned redunancy. The prototype welding operation and the tool path are also graphically simulated. Since the proposed algorithm requires only the position and normal vector of the weldine as an input data, it is useful for the CAD-based off-line programming of the arc welding robot. In addition, it also has the advantages of the redundant manipulator motion control, like singularity avoidance and collision free motion planning, when compared with the other motion control method based on the direct inverse kinematics.