• Journal of Preventive Medicine and Public Health
• /
• v.27 no.4 s.48
• /
• pp.747-761
• /
• 1994

Workers' periodic health examination is the main tools used to manage the health problems of most workers in Korea. The most common health problem found in workers' periodic health examination is liver disorder. Liver disorder is also one of the most common health problems in general population and one of the leading causes of mortality in adult population. Regulation proposed by government (No. 207, Ministry of Labor, 1992) defines the criteria for selection of workers with the liver dysfunction for further evaluative examination and the examination items used for diagnosis of the workers with liver dysfunction. This study was designed to evaluate the proficiency of each examination items presently defined in Regulation and propose the optimal examination items for detection of the liver disorders found by workers' periodic health examination. Study subjects are 186 workers with abnormal liver function tests in screening examination of workers' periodic health examination. Questionnaire survey including past history of liver disorder, drinking history, height and weight was done. Physical examination by physician, routine test items defined by Regulation (SGOT, SGPT, $\gamma$-GTP, protein, albumin, total and direct bilirubin, alkaline phosphatase, $\alpha$-feto protein, HBsAg and anti-HBs), anti-HCV antibody test and liver ultrasonography were done. Results are as follows; 1. Result of evaluative examination utilizing only the items defined in Regulation was; There were 75 workers with suspected live. disorder(40.3%), 63 with no liver dysfunction (33.9%), 13 with suspected hepatitis B(7.0%), 10 workers with hepatitis B(5.4%), 10 workers with hepatitis B carrier state(5.4%), 10 with alcoholic liver disorders(5.4%), 5 with fatty liver(2.7%). When alternative diagnostic criteria applying additional examination items (drinking history, body mass index, anti-HCV antibody and ultrasonography) diagnosability of liver disorder was increased. When all four items were included, final results were; 23 workers (17.8%) with hepatitis B (10 carriers, 13 suspects and 10 hepatitis B), 10 (5.4%) with hepatitis C(4 carriers, 5 suspects and 1 hepatitis C), 13(7.0%) with alcoholic liver disorder, 45(24.2%) with fatty liver (40 suspects, 5 fatty liver), 410%) with suspected liver disorders and 44 (23.7%) with normal liver. 2. Of examination items defined by Regulation, only SGOT, SGPT, $\gamma$-GTP and HBsAg were significantly different in abnormal rate and mean value, and all other laboratory findings did not showed significant difference between two groups. Drinking history, body mass index and anti-HCV antibody test which are the items that authors included in this study, also showed significant difference between two groups. Utilization of body mass index (BMI) for abnormal liver function group in diagnosis of fatty liver had high specificity (97.6%) but sensitivity (22.3%) was low. Therefore we suggest that SGOT, SGPT, $\gamma$-GTP, HBsAg, alcohol drinking history, BMI and anti-HCV Ab were useful for diagnosis of liver disorders among worker's periodic health examination.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.258-258
• /
• 2013

최근 건조 제품의 양질화, 고급화 및 편의화가 요구되어 이를 충족시키기 위한 새로운 건조방법이 계속 개발 되어 왔다. 이러한 방법들 중에서 저온과 진공하에서 건조가 이루어지는 진공 동결 건조는 가장 완벽한 건조 방법으로 최근 실용화 되고 있다. 진공동결건조란 건조의 한 종류로 수분을 함유한 시료를 동결시킨 후 진공펌프를 이용하여 수증기압을 3중점 이하로 낮추어 얼음을 직접 증기로 만드는 승화의 원리에 의해서 얻어진다. 분무진공동결건조의 특징은 (1) 물리적구조의 보존성, (2) 화학적인 안정성, (3) 생물학적인 활동의 보존성, (4) 제품의 높은 복원성 및 재생성이다. 따라서 분무진공동결건조 기술은 크게 진공, 분무, 동결, 건조, 멸균 등과 같은 요소기술의 복합기술이라 할 수 있다. 분말을 제조하기 위해서 진공동결건조 후 분쇄하는 방법을 사용하나 본 방법에서는 정밀화학품 제조를 위해서 분무진공동결건조 방식을 사용한다. 이를 통하여 적당한 크기인 5~10 um의 입경 제조가 가능하고, 공기동력학적인 입경이 기존 방식에 비해 작아서 허파까지의 운반효율이 1.5~2배 우수하다. 화학, 의학 분야에서의 분무동결 건조는 주로 민감한 제품, 즉 생물학적 고유성의 손상 없이 물을 제거하는데 사용되어 영구적으로 저장 가능한 상태로 보관할 수 있으며 물의 첨가로 원상태로 복구할 수 있어서 매우 각광을 받고 있다. 의약용 냉동건조 제품은 항생물질, 박테리아, 혈청, 백신, 검사 약물, 단백질을 포함하는 생물공학 제품들, 세포, 섬유, 화학제품 등이 있으며 주로 vial 또는 ampule 상태로 건조가 이루어진다.본 연구에서는 원료를 $-194^{\circ}C$의 액체질소에 분무시켜 동결된 미립자를 형성한 후 진공 및 저온상태에서얼음의 승화(sublimation)에 기반한 1차 건조와 수증기 탈착(desorption)에 기초한 2차 건조 과정으로 구성된 분무진공동결건조기를 개발하였다. 분무동결 과정의 해석을 통해 2유체식 노즐을 통해 분무된 미세 입경의 액적이 액체 질소 표면까지 도달하는 회수률, 분무 노즐의 위치, 운전 조건 및 용기의 설계의 최적화를 수행하였다. 초기 액적속도, 분무노즐의 높이, 흡입구 추가에 따른 액적 유동 및 회수의 특성을 제시하였으며 이를 통한 분사시스템 고도화 가능성을 제시하였다. 구형의 미세 입자가 적층된 제품의 동결건조 공정의 해석은 흡착승화 모델(sorption sublimation model)을 기반으로 다음과 같은 열전달, 물질전달, 상변화 모델을 고려하여 유도되었다. 분무노즐 및 냉동/진공 배기계 시작품을 개발하여, 표면의 고다공도를 갖춘 입경 3~20 m 정도의 시료를 얻을 수 있으며, 동역학적 입경 5 m 충족함을 확인하였다.

• Journal of Sasang Constitutional Medicine
• /
• v.19 no.3
• /
• pp.51-61
• /
• 2007

1. Objectives The Face is an important standard for the classification of Sasang Constitutions. We are developing 3D Automatic Face Recognition Apparatus(3D-AFRA) to analyse the facial characteristics. This apparatus show us 3D image and data of man's face and measure facial figure data. So We should examine the Measurement of Facial Figure data error of 3D Automatic Face Recognition Apparatus(3D-AFRA) in Software Error Analysis. 2. Methods We scanned face status by using 3D Automatic Face Recognition Apparatus(3D-AFRA). And we measured lengths Between Facial Definition Parameters of facial figure data by Facial Measurement program. 2.1 Repeatability test We measured lengths Between Facial Definition Parameters of facial figure data restored by 3D-AFRA by Facial Measurement program 10 times. Then we compared 10 results each other for repeatability test. 2.2 Measurement error test We measured lengths Between Facial Definition Parameters of facial figure data by two different measurement program that are Facial Measurement program and Rapidform2006. At measuring lengths Between Facial Definition Parameters, we uses two measurement way. The one is straight line measurement, the other is curved line measurement. Then we compared results measured by Facial Measurement program with results measured by Rapidform2006. 3. Results and Conclusions In repeatability test, standard deviation of results is 0.084-0.450mm. And in straight line measurement error test, the average error 0.0582mm, and the maximum error was 0.28mm. In curved line measurement error test, the average error 0.413mm, and the maximum error was 1.53mm. In conclusion, we assessed that the accuracy and repeatability of Facial Measurement program is considerably good. From now on we complement accuracy of 3D-AFRA in Hardware and Software.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.47 no.5
• /
• pp.43-51
• /
• 2010

Attenuation coefficients of medical ultrasound not only reflect the pathological information of tissues scanned but also provide the quantitative information to compensate the decay of backscattered signals for other medical ultrasound parameters. Based on the frequency-selective attenuation property of human tissues, attenuation estimation methods in spectral domain have difficulties for real-time implementation due to the complexicity while estimation methods in time domain do not achieve the compensation for the diffraction effect effectively. In this paper, we propose the modified VSA method, which compensates the diffraction with reference phantom in time domain, using adaptive bandpass filters with decreasing center frequencies along depths. The adaptive bandpass filtering technique minimizes the distortion of relative echogenicity of wideband transmit pulses and maximizes the signal-to-noise ratio due to the random scattering, especially at deeper depths. Since the filtering center frequencies change according to the accumulated attenuation, the proposed algorithm improves estimation accuracy and precision comparing to the fixed filtering method. Computer simulation and experimental results using tissue-mimicking phantoms demonstrate that the distortion of relative echogenicity is decreased at deeper depths, and the accuracy of attenuation estimation is improved by 5.1% and the standard deviation is decreased by 46.9% for the entire scan depth.

• Korean Journal of Optics and Photonics
• /
• v.5 no.3
• /
• pp.423-430
• /
• 1994

We designed and fabricated the single mode fiber pigtailed DFB-LD module for 2.5 Gbps optical communication system. In the design of the DFB-LD module, we made the module divided into two parts of inner sub-module and outer 14-pin butterfly package and cylindrical shaped sub-module contain quasi confocal 2 lens system including optical isolator and electrical connection between these parts via hybrid substrate of bias T circuit. Laser welding was used to assemble the sub-module which requires accurate fixing between optical elements. The fabricated DFB-LD module showed optical coupling efficiency of 20% and - 3 dB small signal response of more than 2.6 GHz. We confirmed mechanical reliability of the module by temperature cycle test where the tested module exhibit optical power fluctuation of less than 10%. Finally we evaluated the performance of the fabricated DFB-LD module as light source of 2.5 Gbps optical communication system, sensitivity of - 30.2 dBm was obtained through 47 km optical fiber transmission under the criterion of $1\times10^{-10}$ BER and transmission penalties were 1.5 dB caused by extinction ratio and 1.0 dB caused by chromatic dispersion of normal single mode fiber. fiber.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.40 no.4
• /
• pp.306-313
• /
• 2013

Speech is complex psycho-physiological mutual process which includes many orofacial organs. Especially, teeth play an especially important role as an articulation organ in conjunction with the lips and tongue. When teeth are missing, the position of tongue and mandible is adjusted to produce correct sound. If a patient's adaptive function is inadequate for modification of malocclusion, prosthodontic and orthodontic interventions are necessary. Missing teeth of young patients should be reconstructed bacause it can cause malocclusion, decreased masticatory efficiency, articulation disorders, esthetic problem, and temporomandibular disorder. Valplast$^{(R)}$(Valplast International Corp, New York, USA) flexible denture is useful for rehabilitation due to its excellent physical properties, esthetics, and small volume. This case is regardingan intellecturally disabled patient with anarticulation disorder caused by missing lower incisors due to trauma. The patient showed improvement in articulation by using flexible partial denture. The purpose of this report is to figure out the influence of missing lower anterior teeth on articulation.

• Journal of Veterinary Clinics
• /
• v.23 no.2
• /
• pp.133-143
• /
• 2006

Diagnosis on reproductive failures of dairy cows by ultrasonography was performed for 151 dairy cows. To diagnose types of reproductive failures, ultrasonography (SA 600, Medison, 5.0 MHz rectal linear transducer) was carried out in combination with rectal examination. Of 151 dairy cows, pregnant cows were 13 and the cows in normal estrual cycle were 40 cows, thereby the cows with reproductive failures were 98 cows. 1. Of 98 cows with reproductive failures, the cows with ovarian diseases were 34 cows (34.7%) and the cows with uterine diseases were 41 cows (41.8%). 2. The diameter of follicle in proestrus was 1.94 cm and it was longer than that of follicle in diestrus (p<0.05). 3. The mean size of corpus luteum of pregnant cows was bigger than that of corpus luteum in normal diestrus (p<0.05). 4. The length of cystic corpus luteum was 3.26 and the width of that was 1.91 cm. The length of corpus luteum tissue was 1.95 and the width of that was 1.91 cm excluding the size of cavity in corpus luteum. 5. The mean length of follicular cyst was 3.31 and the mean width of that was 2.3 cm. 6. The mean length and width of luteal cyst was 3.45 and 2.25 cm, respectively. The mean length and width of corpus luteum tissue was 1.15 and 0.67 cm, respectively, excluding the size of cyst in the luteal cyst. 7. The width of uterine horn associated with endometritis was significantly reduced as the period after parturition was elapsed (p<0.05). The mean width of uterine horn within 40 days after parturition was 4.55 cm. These results indicated that ultrasonography is of great use for accurate diagnosis both on ovarian diseases and uterine diseases and that it is very effective to diagnose endometritis in dairy cows.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.30 no.6_1
• /
• pp.539-547
• /
• 2012

Volume survey for earthwork is conducted periodically at every month at large scaled construction sites for request payment for the construction. Currently, the earthwork volume is calculated on the overlapped drawing for two cross sections which were created by new and previous surveying data observed by GPS and TS. However the survey is required lots of time and expenses as it is a pin-point surveying method thus surveyors intend to get data only for the heavy undulated topographic features chosen by himself to save time and expenses. Consequently, it causes poor results due to low dense measurement as well as it's not matched with the results by another surveyors. As a result, the conflicts related in earthwork volume calculation often arises among the owner, contractors and sub contractors. In this study, we developed a method to get surveying data for fast and accurate volume calculation using 3D Mobile Laser System and conducted an application test. Also we carried out experiments for topographic survey using MLS to judge for the application additionally. The results showed that we could reduce a time for cross section survey from 48 hours to 2 hours and collected high dense data which have 0.2m interval instead of 3m interval compare with existing method. Also we could make a map which has high accuracy within 10cm in horizontal through topographic survey using MLS.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.31 no.4
• /
• pp.311-319
• /
• 2013

As heavy rains occur more frequently due to the recent climate change, slope collapses are increasing, and damage to human life and properties is accordingly increasing every year. The most proper method to take preventive measures against slope collapses is to remove the cause after understanding the cause of slope collapse in advance, and for such, slope safety inspection is implemented for preventive purposes, to investigate the cause, and as a measure for restoration. Thus, this Research was able to reach the following conclusion after utilizing LiDAR, which obtains detailed topographic information in a short period of time with point cloud data on slopes subject to safety inspection. First, as a result of analyzing the errors after installing a check point in the subject area, the RMSE of the horizontal location error appeared to be ${\pm}2.2cm$ and the RMSE of the vertical location error appeared to be ${\pm}3.0cm$, which shows a practically satisfactory result. Second, the economic feasibility was outstanding and obtaining accurate topographic information was available. Third, an area once scanned allowed to accurately obtain an unprescribed cross-sectional diagram in a short period of time, thus, appeared to be convenient for experts to detect dangerous sections.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.4
• /
• pp.100-105
• /
• 2016

The use of 3D scanners has increased gradually according to increasing 3D printer applications. The precision inspection of car parts or electronic components is an important issue not only in the field of mass production, but also in small-scale production. Recently, 3D scanner equipment efficiency and recognition technology has been improved continuously. On the other hand, the spraying time to prepare 3D scanning is time-consuming and has environmental problems. Therefore, an automatic spray system has been in demand by the manufacturing industry. Automatic spray equipment was newly developed for the preparation of a 3D scanner. In this research, the automatic spray system guarantees uniform spray operation. To determine the optimal spray parameters, various spraying methods, solutions and conditions were tested and compared with the experiments. The preparation time for 3D scanning was reduced to 1/10 compared to the manual spraying time, and indicates the optimal spraying conditions through a comparison of various spray coating conditions.