• Journal of Korea Water Resources Association
• /
• v.32 no.3
• /
• pp.255-263
• /
• 1999

The laboratory datas are for local scour depth measurement at vertical-wall abutment. These include the data to demonstrate the effects of local scour depth of abutment nose shape, alignment angle, flow depth and flume slope. The pattern of local scour were measured and analyzed the abutments which are rectangular, sharp, chamfered rectangular and ablong nose shapes. The experiments were carried out with varing the flume slope and alignment algle increasing flow depth every step in 1cm for four abutment types on the live-bed scour conditions. The flume slope and alignment angle were varied in five cases : for latter 30 $^{\circ}$, 60 $^{\circ}$, 90 $^{\circ}$, 120 $^{\circ}$ and 150 $^{\circ}$, for former 0.01%, 0.03%, 0.05%, 0.1% and 0.2%. The maximum scour depths were analyzed for the shaped of abutment nose with rectangular, ablong, chamfered rectangular and sharp in order. The results of the experiments show that the scour depth varies not only with abutment nose shapes and alignment angle but also with the flow depth and flume slope.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.40 no.4
• /
• pp.248-255
• /
• 2003

This paper presents a fingerprint recognition algorithm using cross-correlation function. This algorithm consists of minutiae extraction, minutiae alignment and minutiae matching, where we propose a new minutiae alignment method. In our alignment method, the rotation angle between two fingerprints is obtained by using cross-correlation function of the minutia directions, thereafter the displacement is obtained from the rotated fingerprint. This alignment method is capable of finding rotation angle and displacement of two fingerprints without resorting to exhaustive search. Our fingerprint recognition algorithm has been tested on fingerprint images captured with inkless scanner. The experiment results show that 17.299% false rejection ratio(FRR) at 2.086% false acceptance ratio(FAR).

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.150-150
• /
• 2017

조립라인에서 볼트의 수량을 정확하게 검출하는 장치는 작업속도의 향상 및 불량발생을 줄이기 위해 필요한 것이다. 현재 조립에 필요한 수량을 작업자의 시각에 의해 파악하고 있기 때문에 작업시간이 증가되고 있으며 특히 조립 과정 중 작업자의 실수로 볼트가 제품의 내부에 침투하여 제품의 소음, 성능저하 및 수명단축을 초래하고 있다. 본 연구에서는 작업자의 편의성 및 조립속도 향상을 위해 볼트를 감지하여 자동으로 수량을 검출하는 장치를 개발하였다. 볼트의 특성에 따라 볼트 선별부의 치수를 수정하면 되도록 하였다. 조립라인의 생산성을 향상시키기 위한 설계는 Auto CAD를 이용하였다. 조립라인의 공간 효율 증가를 위하여 볼트 수량 검출기의 가로${\times}$세로의 크기를 최소로 하여 $220{\times}360{\times}1170mm$로 설계하였다. 받침대는 $60{\times}60$ 프로파일을 이용하였고 다른 구성 부품은 SUS304 재질을 가공하여 조립하였다. 실험은 실험구 마다 100회 측정하여 평균값을 나타냈으며, 소수점은 시스템에 영향이 없기 때문에 절사하였다. Test 19-27 구간이 배출부가 가장 적게 구동하는 것으로 나타났다. 정렬부의 각도가 10, $15^{\circ}$의 경우는 볼트와 배출부의 마찰력이 증가하여 구동횟수가 증가한 것으로 판단된다. $20^{\circ}$이상의 각도에서는 볼트가 배출부에 안착하기 전에 하강하기 때문에 반복횟수가 증가한 것으로 판단된다. 따라서 최적의 정렬부 각도는 $20^{\circ}$로 나타났다. 볼트의 지름이 3, 5, $7{\phi}$ 일 때 정렬부의 각도에 따른 정렬부의 반복횟수에 대한 결과 값을 한 결과 $20^{\circ}$에서 정렬부의 구동횟수가 가장 적은 것 으로 나타났다. 정렬부의 각도가 큰 경우 구동에 의한 볼트와의 운동에너지의 증가로 반복횟수가 증가한 것으로 판단된다.

• Korean Journal of Optics and Photonics
• /
• v.11 no.4
• /
• pp.279-288
• /
• 2000

The variations of output energy due to tilt output coupler for different types of pulsed Nd:YAG laser resonators were compared by measuring FWHM (full width at half maximum) which means the width of angle displacement where maximum output energy decreases to half value. We proposed a new configuration of pulsed solid-state laser resonator which had high FWHM for tilting of output coupler and which was little sensitive for tilting of rear optics. We proved that our laser resonator had high alignment stability using ABeD ray matrix method because the ray matrix of such a resonator corresponded to unit matrix. atrix.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2021.07a
• /
• pp.311-312
• /
• 2021

본 연구는 실내외 자전거 운동 시 빈번히 발생하고 있는 무릎상해를 예방하기 위해 자전거 운동을 실시할 때 올바른 자세를 유지 할 수 있도록 도와주는 보호 장비 개발 내용이다. 자전거 운동 시 발생할 수 있는 손상을 예방하기 위해서는 안장의 높이, 좌우 무릎사이의 간격, 무릎 각도가 안전한 각도 범위내에 있어야 한다. 본 연구에서는 이러한 무릎의 올바른 정렬을 유지한 채 운동을 지속할 수 있도록 센서부와 제어기로 구성되는 것을 특징으로 한다. 센서부는 가속도 센서, 자이로 센서, 속도감지 센서로 구성하여 자전거 운동 시 정상적인 무릎정렬과 비교하여 올바르지 못한 정렬 상태에서 운동 시 즉시 피드백하여 자세를 수정할 수 있도록 유도해 무릎의 상해를 예방하는 실내외 자전거 이용 시 운동 상해를 예방하기 위한 무릎 보호대를 개발하고자 한다.

• Journal of Veterinary Clinics
• /
• v.32 no.6
• /
• pp.481-485
• /
• 2015

The present study determined the normal reference ranges for overall pelvic limb alignment of small-breed dogs. For this purpose, 60 cadaveric canine pelvic limbs from normal small-breed dogs (Maltese, Poodle, Shih Tzu, Yorkshire Terrier). A frontal full-limb radiograph of each pelvic limb was obtained, and mechanical tibiofemoral angle (mTFA), mechanical metatarsotibial angle (mMTTA), mechanical axis-femur angle (MAFA), and mechanical axis-metatarsus angle (MAMTA) were measured from each radiograph, along with mechanical deviation of the stifle (SMAD) and tarsal joints (TMAD). The 95% CI for radiographic values of all pelvic limbs were mTFA, 5.7-7.4; mMTTA, $-2.2--0.8^{\circ}$; MAFA, $3.5-4.5^{\circ}$; MAMTA, 1.0-2.0; SMAD, 2.1-2.7%; TMAD, 0.5-1.0%. There values varied among the breeds, except for mTFA. The reference ranges can be used for diagnosing pelvic limb deformities in small-breed dogs and for planning corrective osteotomies.

• The Journal of the Korea Contents Association
• /
• v.22 no.3
• /
• pp.576-585
• /
• 2022

In determining the cause of dysmenorrhea, it is necessary to investigate postural alignment and balance. The purpose of this study is to compare and analyze whether there is a difference in posture alignment and foot pressure balance according to the dysmenorrhea degree. The subjects were twenty female students in their 20s, who had pain caused by dysmenorrhea. According to the degree of dysmenorrhea, the subjects were divided into mild and severe groups. In the results, there was a significant difference only in shoulder height asymmetry angle between the mild and severe groups (p<0.05), and there was no significant difference in pelvic and knee joint alignment. In the correlation analysis, there was a significant positive correlation between the dysmenorrhea score (MDQ) and shoulder height asymmetry angle was found. These results indicate that dysmenorrhea symptom and asymmetric alignment of shoulder are related. To analyze these factors, further research will need to investigate the correlation between dysmenorrhea and spinal alignment.

• Journal of Digital Convergence
• /
• v.16 no.11
• /
• pp.543-551
• /
• 2018

This study investigated the effects of corrective exercise and TECAR on cervical alignment, pain threshold, and pain in forward head posture patients. The subject includes 30 forward head posture patients. In the intervention methods, the experimental group combined corrective exercise and TECAR treatment. Only the corrective exercise was applied to the control group. Assessments were made on cervico vertebra angle (CV angle), pain pressure threshold (PPT) and neck disability index (NDI) visual analog scale (VAS). The intervention was conducted six times a week for two weeks. Both groups showed significant differences in CV angle, PPT, NDI, and VAS. Also, PPT, NDI, and VAS excluding CV angle were significantly improved in the study group compared to the control group. These results suggest that the intervention method that combines corrective exercise and TECAR treatment has a more positive effect on pain and ADL ability of forward head posture patient.

• Korean Journal of Optics and Photonics
• /
• v.13 no.5
• /
• pp.384-389
• /
• 2002

A new idea of the wavelength locking module for DWDM application was investigated in the present research. Only one etalon photo-diode is generally used in the internal/external wavelength locking system. For the internal wavelength locking module with 50 GHz applications, an algle tuning method of the etalon commonly applied. However, the alignment process of the etalon with the angle tuning method is limited because the lock performance is extremely sensitive accoriding to the change of the tilting angle. In an optical viewpoint, the alignment tolerance of the locker module with the etalon PD array block was good, and the precise tuning of the wavelength was possible. The characteristics of free spectral range (FSR) and peak shift of wavelength according to the tilting angle with the locker module was investigated. For the present module, the optimized initial tilting angle was experimentally obtained.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.15 no.1
• /
• pp.76-82
• /
• 2011

The thrust axis alignment of the launch vehicle is very important because the misalignment causes the unstable attitude control and results in mission failure. Generally, optical methods such as digital theodolite and laser tracker and mechanical method such as turn table method are used to align the thrust axis. This article deals with the simple method using inclinometer based on the gravitational direction. The inclinometer indicates zero degree when that is located on the perpendicular plate to gravitational direction. This method needs two inclinometer, such as standard and alignment ones and uses the angle difference as the reference data to adjust the TVC actuator offset.