• Journal of the Mineralogical Society of Korea
• /
• v.26 no.1
• /
• pp.27-34
• /
• 2013

X-ray powder diffraction is one of the most powerful techniques for qualitative and quantitative analysis of crystalline compounds. Thus, there exist a number of different methods for quantifying mineral mixtures using X-ray diffraction pattern. We present here the use of Rietveld and PONKCS (partial or no known crystal structure) methods for quantification of amorphous and crystallized mineral phases in synthetic mixtures of standard minerals (amorphous silica, quartz, mullite and corundum). Pawley phase model of amorphous silica was successfully built from the pattern of 100 wt% amorphous silica and internal standard-spiked samples by PONKCS approach. The average of absolute bias for quantities of amorphous silica was 1.85 wt%. The larger bias observed for lower quantities of amorphous silica is probably explained by low intensities of diffraction pattern. Averages of absolute bias for minerals were 0.53 wt% for quartz, 0.87 wt% for mullite and 0.57 wt% for corundum, respectively. The PONKCS approach achieved improved quantitative results compared with classical Rietveld method by using an internal standard.

• Journal of the Mineralogical Society of Korea
• /
• v.24 no.2
• /
• pp.119-131
• /
• 2011

The asbestos contents in some representative building materials were analyzed using JIS (Japanese Industrial Standard) X-ray diffraction (XRD) method. The changes in mineral composition during analysis process and problems in JIS method were also examined. XRD analysis of some representative domestic building materials used for roof, wall, ceiling, and floor indicates that slate have the highest asbestos content having 6.87~6.93% of chrysotile. Other building materials analyzed in this study also have 1.35~3.98% of chrysotile contents. The XRD analysis results of asbestos contents in some domestic building materials are presented in this study. This method is very effective for the asbestos content evaluation of building materials according to newly modified asbestos content regulation (Law of Industrial Safety and Health, 2007-26) that limits asbestos content less than 0.1% by Ministry of Employment and Labor. Small amount of tremolite as well as chrysotile were also observed in some samples. With consideration of crystal shape, contents and geological occurrence, it is considered that tremolite is an associated mineral of chrysotile and is not intentionally added. Complemental analyses with optical microscope and SEM/EDS are also necessary because XRD method cannot distinguish asbestiform from non-asbestiform. The XRD method applied in this study is very effective in the asbestos content analysis of building materials, specially building materials showing high asbestos concentration in residues due to the high loss rate with ashing and acid dissolution procedure.

• Journal of the Mineralogical Society of Korea
• /
• v.32 no.4
• /
• pp.313-321
• /
• 2019

Diatomite is a silicic porous sedimentary rock composed of diatom frustules, used for filtration aid, filler, absorbent, abrasive, carrier, insulator, and fertilizer. During the calcination of diatomite to improve physical properties for filtration-aid application, amorphous silica is transformed to cristobalite. X-ray diffraction and scanning electron microscopy studies were carried out for 17 diatomite samples, showing that 16 diatomite samples contain cristobalite in the range of 6~100 %. Concentration of respirable cristobalite in air is regulated as harmful substances, but the residual cristobalite in food is treated as generally safe substance. The determination procedure of cristobalite content in food was established for managing food safety. Calibration curve of cristobalite filtered on silver membrane were obtained by X-ray diffraction. The lower limit of quantification was evaluated as 2.7 mg. The cristobalite was not detected in the analyses of selected food samples using the established procedure.

• Journal of the Mineralogical Society of Korea
• /
• v.22 no.1
• /
• pp.49-61
• /
• 2009

We studied the mineral composition and mineral distribution pattern of 131 surface sediments collected at the cruise in 2000 and 2007 from Southeastern Yellow Sea, South Sea of Korea and Southern part of Jeju Island. Mineral compositions of surface sediments were determined using the quantitative X-ray diffraction analysis. Surface sediments were composed of rock forming minerals (quartz 37.4%, plagioclase 11.7%, alkali feldspar 5.5%, hornblende 3.1%), clay minerals (illite 19.2%, chlorite 4.7%, kaolinite 1.8%) and carbonate minerals (calcite 10.7%, aragonite 3.4%). Distribution of clay minerals is very similar with fine-grained sediments, and especially same as the distribution of HSMD (Hucksan Mudbelt Deposit), SSKMD (South Sea of Korea Mudbelt Deposit) and JJMD (Jeju Mudbelt Deposit). The coarse sediment seemed to be relic sediment during the last glacial maximum and mainly consisted of rock forming minerals. Whereas the fine sediments mainly composed of clay minerals. Based on the clay mineral composition, main ocean current and geographical factor, HSMD and SSKMD might have derived from the rivers around the Korean Peninsula. However, JJMD is complex mudbelt deposit, which formed by Korean rivers and oceanic sediments.

• Journal of the Mineralogical Society of Korea
• /
• v.27 no.3
• /
• pp.107-114
• /
• 2014

In this study, we tried to determine the origin of fine-grained sediments in Southeastern Yellow Sea Mud patch (SEYSM) using principal component analysis coupled with semi-quantitative X-ray diffraction analysis for 4 major clay minerals. We used 51 marine surface sediments from SEYSM and 33 surface sediments of rivers flowing into the Yellow Sea. We made bioplot diagram using R program with principal component 1 and component 2 because the two components might contain about 98% of all data. The content of each clay mineral in the south and north regions of SEYSM are almost similar. In the biplot, SEYSM sediments distribute close to Korean rivers sediments than Huanghe and Changjiang sediments. Based on these results, we suggest that SEYSM is originated from the Korean rivers sediments. The higher accumulation rate in the SEYSM compared to the sediment discharge from neighboring Korean rivers can be explained by erosion and reworking of surface sediments in this area. The principal component analysis can be used for the provenance research of marine sediments around the Korean Peninsula.

• Journal of the Mineralogical Society of Korea
• /
• v.26 no.3
• /
• pp.189-196
• /
• 2013

In this study, we tried to define the origin of fine-grained sediments in Southwestern Cheju Island Mud (SWCIM) using principal component analysis. We used relative clay mineral compositions using 138 marine surface sediments, 4 Huanghe sediments and 3 Changjiang river sediments by the semi-quantitative X-ray diffraction analysis. We made bioplot diagram using R program with principal component 1 and component 2 because they might contain more than 90% of all data. Although the distribution pattern of each clay minerals in SWCIM is so intricate, smectite and kaolinite contents are high in the west region, but illite and chlorite contents are rich in the east region. In the biplot, the east region of SWCIM distribute around Changjiang river, whereas west region of SWCIM disperse around Huanghe. Our results might reveal that west region of SWCIM is mainly originated by Huanghe, but east region of SWCIM by Changjiang River.

• Mineral and Industry
• /
• v.14 no.1
• /
• pp.1-17
• /
• 2001

국내에서 천연 제올라이트는 부존자원으로서의 높은 잠재성에도 불구하고, 용도개발에 대한 연구개발이 부진하여 관련산업이 활성화되지 못하고 있는 실정이다. 환경개선용 기능성 소재로서의 천연 제올라이트의 응용이 앞으로 국내에서 천연 제올라이트의 부가가치 향상을 도모할 수 있는 효과적인 방안이 될 것으로 생각된다. 환경산업 분야에서는 천연 제올라이트가 합성 제올라이트와의 경쟁관계에서 유리한 위치를 점유할 수 있을 것으로 판단된다. 환경산업에서 천연 제올라이트의 새로운 수요처가 형성되면 기존의 저급한 용도보다 한 단계 향상된 부가가치의 창출이 가능할 것으로 여겨진다. 국내산 천연 제올라이트의 자원잠재성과 부가가치를 제고시키기 위해서 앞으로는 관련산업이 응용광물학적 지식기반 산업으로 전환되어야 한다. 또한 지금까지 국내에서 천연 제올라이트에 관례적으로 적용되어 왔던 화학조성 및 CEC 분석자료에 의거한 제올라이트의 품위 및 품질 평가 방식에서도 개선과 보완이 요구된다. 특히 X-선회절 정량분석, 전자현미경관찰, 선택적 이온교환 및 흡착특성과 관련된 실험 등을 통해서 천연 제올라이트의 품위와 품질이 보다 정밀하게 감정되고 평가되어야 할 것으로 여겨진다. 따라서 앞으로는 천연제올라이트의 부가가치 향상을 위한 연구개발과 산업응용은 반드시 제올라이트의 세공구조, 광물상, 광물 조성 및 특성에 대한 이해와 지식에 기반하여 이루어져야 할 것이다.

• Journal of the Mineralogical Society of Korea
• /
• v.23 no.1
• /
• pp.15-23
• /
• 2010

The absolute clay mineral compositions and regional distribution of the 131 bulk marine surface sediments around the Jeju Island was compared to their relative compositions and distribution using quantitative X-ray diffraction analysis. Average absolute clay mineral composition is illite 15.3% (0.5~40.5%), chlorite 2.6% (0~7.9%), and kaolinite 1% (0~5.6%). Total contents of the clay minerals are very high in the South Sea of Korea, northwestern part and southern offshore of Jeju Island. The average relative composition is illite 70.9% (16.7~89%), chlorite 21.5% (8.4~68.5%), and kaolinite 7.6% (0~29.3%). Relative illite contents are high in the northwestern and southeastern part of study area, and southern part of Jeju Island. Chlorite contents are high in the eastern part of study area and western part of Jeju Island. Kaolinite contents are high in the western and southern part of Jeju Island, and southern offshore of Jeju Isand. Absolute Distribution patterns are very similar to those of fine-grained (from clay to silt) sediment, whereas relative distribution patterns do not show any relationship with those of fine-grained sediment.

• Journal of the Mineralogical Society of Korea
• /
• v.31 no.2
• /
• pp.103-111
• /
• 2018

Mineralogical properties of two Asian dust (Hwangsa) samples collected during dust events in April 6 and 15, 2018 were examined by X-ray diffraction (XRD) and scanning electron microscopy (SEM). XRD analyses showed that Asian dusts were dominated by phyllosilicates (62 wt%) comprising illite-smectite series clay minerals (ISCMs) (55%), chlorite (3%) and kaolinite (4%). Nonphyllosilicate minerals were quartz (18%), plagioclase (9%), K-feldspar (3%), calcite (3%), and gypsum (2-4%). Mineral compositions determined by SEM chemical analyses were consistent with XRD data. ISCMs occur as submicron grains forming aggregate particles or coating coarse mineral grains such as quartz, plagioclase, K-feldspar, chlorite, and calcite. The ISCMs are often associated with calcite nanofibers and gypsum blades. Mineralogical properties of 2018 dusts were similar to those of previous dusts although clay contents were higher than that of coarse 2012 dust.

• The Journal of Engineering Geology
• /
• v.21 no.4
• /
• pp.313-322
• /
• 2011

On September 2007, numerous slopes at Jeonranam-Do collapsed as a result of rainfall related to Typhoon Nari. Failure occurred at a road cut-slope on the ${\bigcirc}{\bigcirc}$ detour road, damaging transport infrastructure. This study aims to determine the cause of failure based on field investigations, the geotechnical properties of soil, clay mineral composition, and quantitative analysis. The studied cut slope consists of weathered soil that originated from volcanic rocks, and minor faults and a mafic dyke. Surface water tends to seep into the soil because the roadway is not sealed and because of poorly installed drainage. Sieve and XRD analyses indicate that soils in the failure zone are ML and CH, which are prone to swelling due to the presence of clay minerals such as smectite and vermiculite. The slope failed due to the improper construction of drainage facilities, the presence of geological weak zones, and high soil contents of swelling clay.