• Korean Journal of Agricultural and Forest Meteorology
• /
• v.12 no.4
• /
• pp.264-276
• /
• 2010

The objectives of this study were to introduce the methods of soil respiration measurement, to review soil respiration studies conducted in Korea, and to suggest potential issues generated from using various methods for soil respiration measurement. According to the measurement principles, the methods of soil respiration measurements are classified as: alkali absorption method (AA), closed chamber method (CC), closed dynamic chamber method (CDC), and open flow method (OF). Based on the litereaure review on soil respiration studies in Korea, the CDC method was mostly used by the researchers (62%), followed by the AA (17%), OF (13%) and CC (8%) methods. Along with these methods, various instruments were used such as LI-6400-09, EGM-3, EGM-4, and automatic soil respiration chamber. Most of the soil respiration measurements were carried out in forest ecosystems and the reported soil respiration showed a wide range of variations from 130 to 900 mg $CO_2\;m^{-2}h^{-1}$. Continuous monitoring of soil respiration with minimal disturbance and the potential inconsistency in measurements are still the challenges facing the researchers, causing a paucity in quality datasets of sufficient quantity. Few attempts of intercomparison among different methods hinder the data users from synthetic analysis and assessment of the collected datasets. In order to better estimate soil carbon budget and understand their exchange mechanisms in key ecosystems of Korea, it is necessary to measure soil respiration at various plant functional types, soils, and climate conditions over a decadal time scale along with the study on the partitioning of soil respiration into autotrophic and heteorotrophic components.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.1073-1077
• /
• 2006

급속한 산업화로 인한 오염물질의 증가와 생물서식처의 감소는 수자원과 생태계를 위협하고 있다. 국내의 경우 수자원의 질을 개선하기 위해 '90년대 초부터 하수처리시설 등의 저감시설을 대폭 확충하였으나 현재까지 팔당호 등 주요상수원이 목표수질에 못 미치고 있으며 그 원인은 유입오염물질의 $22{\sim}37%$를 차지하는 비점오염원으로 지목되고 있다. 또한 생태.경관적 가치가 높은 수변지역은 각종 개발로 생물서식처가 급속도로 감소하여 종 다양성 보전 측면에서 대책마련이 시급한 실정이다. 이와 유사한 상황에 직면한 선진외국에서는 '하천회랑(river corridor)' 또는 '토양 및 생태시스템을 포함하는 수역과 육역의 점이(漸移)지대'를 의미하는 이른바 '수변완충지대(Riparian Buffer Zones)'의 오염정화 및 생태조성 효과 등의 연구를 통해 효율적 조성방안을 제시하고 있으며 다양한 형태로 현장에 적용하고 있다. RBZs의 일반적인 기능으로는, 유사나 오염물질의 여과 및 차단(필터링 효과), 영양염류의 저감, 하천변 식생을 통한 수자원의 정화 및 강턱의 안정화, 홍수로 인한 하천침식의 방지, 수변 생물 서식처 제공, 수변 그늘 제공에 의한 수온상승 방지, 심미 교육 위락 공간 제공 등이다. 본 연구에서는 외국의 RBZs(Riparian Buffer Zones)가이드라인을 참고하여 국내실정에 맞는 파일럿 규모의 시험완충지를 설계 및 조성하였다. 시험완충지는 남한강 연안에 초본류, 갈대류, 관목류, 자연식생, 혼합식생 등 5가지 'dry biotope'형태로 설치하여 1년간 계절별로 운영하였다. 또한 실험의 정량화와 다양한 조건변화를 위해 차수막, 위어, 유량.농도 조절장치, 라이시미터 등 보조시설을 설치하였고, 정기적인 모니터링을 실시하였다. 조사결과 외국사례를 살펴보면 RBZs의 적정 폭은 수질정화기능의 경우 $15{\sim}30m$, 생태서식처 기능은 최소 90m이상으로 제시되며, 시험완충지의 수질정화효과는 SS, T-N, T-P, TOC의 평균저감율이 각각 50%이상으로 나타났다. 식생모니터링 결과, 환삼덩굴 등 우점종의 잠식속도는 약 15일이며 갈대와 갯버들의 경우 우기시 인공목책호안과 동일한 침식방지 효과를 보이는 것으로 관찰되어 식생의 주기적인 모니터링과 지역 특성에 적합한 우점종 선정이 매우 중요한 것으로 판단된다.

• Journal of Korean Society of Forest Science
• /
• v.113 no.1
• /
• pp.118-130
• /
• 2024

Rehabilitation of mining areas can reduce damage to ecosystems. However, the effects of rehabilitation on ecosystem services (ESs) and its contribution to local communities are not well known. Thus, the aims of this study were to clearly identify the ES beneficiaries affected by mining activities, to determine how the beneficiaries profit from surrounding areas in cooperation with local stakeholders, and to manage the rehabilitation areas for the ESs that the beneficiaries want. This study chose 18 ESs (4 provisioning, 7 regulating, 5 cultural, and 2 habitat services) based on The Economics of Ecosystems and Biodiversity. A semi-structured questionnaire survey using an 11-point Likert scale was conducted among 87 community residents to investigate social awareness and identify key ESs. The survey results from two local communities showed high awareness and demands mainly on cultural (mental and physical health, aesthetic appreciation, and recreation) and regulating services (local climate and air quality, and moderation of extreme events). These services were related to the daily lives of residents in local communities, provided positive benefits, and potentially improved the residents' future livelihoods. However, the average questionnaire scores were limited to 6-7 points, indicating that the benefits to local communities were meager. The residents' awareness of provisioning service was negative, even if it provided goods and profit opportunities. This indicated a disconnection between local communities and provisioning services due to forest rehabilitation that did not consider local communities that traditionally relied on specific provisioning services before the onset of mining activities. Future forest rehabilitation in abandoned mine areas must consider the welfare of local communities for sustainable use of rehabilitated forests and enhancing ESs. In this study, only a qualitative evaluation based on frequency analyses was conducted. The quantification and valuation of key ESs are warranted in the future to promote ESs from forest rehabilitation in abandoned mine areas. The study results would be useful for developing site-specific ES promotion strategies for reforesting mine areas.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.41 no.2
• /
• pp.11-18
• /
• 2023

This study aims to distinguish what can be used in consideration of the national situation with Korea for Chinese Scenic and Historic Interest Areas, and the results are as follows; First, the Chinese Scenic and Historic Interest Areas expanded to the existing scenic cruise culture, travel, and tourism culture in the process of the influx of Western culture in the modern and contemporary era, and became popular as a travel destination. Accordingly, the Chinese government developed the tourism industry around the scenic sites, and thanks to the development of transportation and communication, the Scenic and Historic Interest Areas has become an important national heritage. This influenced the establishment of the system related to Scenic and Historic Interest Areas, and today, it is operated around the Scenic and Historic Interest Areas ordinance. Second, the designation of the Scenic and Historic Interest Areas is divided into the size of the site according to the area, and the process of selecting the Scenic and Historic Interest Areas classification, rating evaluation, and comprehensive value evaluation according to evaluation indicators and rating standards is carried out. Accordingly, according to the results of the classification, it is subdivided from the national level to the Scenic and Historic Interest Areas at the local level. Third, the central government is in charge of managing and supervising Scenic and Historic Interest Areas across the country, and the local government's construction department is in charge of supervising Scenic and Historic Interest Areas in the region. The management organization of Scenic and Historic Interest Areas established by local governments above the county level has a system that actually protects, utilizes, and manages Scenic and Historic Interest Areas. In addition, 14 detailed indicators are used to monitor Scenic and Historic Interest Areas. Based on these results, considering the application of the domestic scenic site policy, the method of developing the policy that has established the system from the perspective of the utilization of the people is worth considering. On the other hand, the evaluation of the designation and management system through the setting of various indicators has limitations in that it is difficult to secure objectivity in impressing or evaluating the landscape. Therefore, rather than blindly introducing quantified evaluation, it seems that guidance and promotion on how to expand consensus on scenic values and enjoy heritage should be prioritized.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.55-55
• /
• 2017

가뭄은 국민생활 및 경제 등에 막대한 손실을 초래하며, 지역사회 공동체나 사회기능에 심각한 영향을 끼칠 수 있는 재해이다. 가뭄피해 최소화를 위해서는 단기대응, 복구지원 등의 사후대책에서 사전대비 및 예방으로의 정책 전환이 필요하며, 이러한 정책 수립을 뒷받침하기 위해서는 가뭄에 따른 정량적인 피해영향 평가가 우선적으로 필요하다. 하지만 가뭄 피해의 범위 및 형태는 워낙 광범위하기 때문에, 피해추정을 위한 잣대라 할 수 있는 영향평가 기법조차 제대로 정립되지 못하고 있는 실정이다. 국내에서는 분야별(기상, 농업, 수문)로 지수화 된 지표를 이용한 가뭄 평가가 주로 수행되고 있으며, 경제적 영향평가는 방법론에 대한 시범 연구 수준이다. 가뭄기록조사 등 과거 가뭄피해 자료에서도 피해액의 금액환산이 되지 않은 사례가 대부분이며 급수차지원, 관정개발 등 사후복구비 위주의 일부 자료만이 피해금액으로 제시되어 있을 뿐이다. 댐, 저수지 등에 의한 용수공급 안정성으로 인해, 기상학적인 가뭄이 즉시 물부족으로 인한 피해로 이어지지는 않지만, 물부족이 발생하거나 부족량이 예측되는 상황에서 피해규모를 시스템적으로 추정 및 비교할 수 있는 기법 개발의 필요성에 의해 잠재피해액 개념의 공급지장비용 추정기법을 개발하였다. 공급지장비용 또는 편익 도출을 위한 이론적 배경으로, 경제적 가치 또는 파급효과를 분석하기 위한 방법은 경제학적 접근법과 비경제학적 접근법으로 구분된다. 경제학적 접근법에서 사용하는 진술선호 기법의 경우 전국을 대상으로 설문 등의 과정을 거쳐 지불의사액을 도출하는 과정이 필요하기 때문에 많은 조사비용이 소요된다. 비경제학적 또는 공학적 접근법으로 분류되는 대체비용법은 이론적 배경이 약하고 대체항목의 선택에 주의가 필요하다는 단점이 있으나, 물가자료, 산업통계, 수자원통계 등 기초자료의 주기적 업데이트가 유리하며, 정신적 피해를 제외할 경우 피해비용 추정결과의 편차가 진술선호기법 보다는 작은 장점이 있다. 본 연구에서는 피해비용의 과대추정에 유의하여 대체비용법에 기반한 일본 후생노동성의 감 단수피해추정기법을 우리나라 자료에 맞게 수정하여 공급지장비용을 추정하였으며, 경제학적 접근법에 의한 용수의 한계가치비용 등과 비교를 통해 적용성을 검토하였다.

• The KIPS Transactions:PartD
• /
• v.14D no.1 s.111
• /
• pp.107-120
• /
• 2007

When it tomes to IT investment, it's a challenge for the management to make the right decision. Unlike investment in other business area, it's hard to measure direct cost vs. effect in IT business. To validate the investment in IT, it is required to establish objective assessment system that both provider and beneficiary of information can accept, and it is also required to suggest an assessment tool of fixed quantity that includes measuring standards and method for the economic effect of new investment. This study, therefore, has developed IT ROI Methodology that can prove investment validity by accepting the strong points of the existing models while complementing their weak points and by analyzing IT Investment and IT Efforts. It also has built an IT ROI System that reflects the methodology which is applied to 21 companies of 5 business categories. This system is designed to provide effective and objective decision-making tool for IT investment by proving what positive impacts IT could have on business activities.

• Information Systems Review
• /
• v.6 no.2
• /
• pp.227-242
• /
• 2004

With the advent of the digital economy, the business eco-system has been changing from the competition system across individual companies to that of supply chains. Under the rapidly changing business environment, it becomes true that the competitive power of the steel maker depends on the shipbuilding company, an important customer of the steel maker. Accordingly, e-partnering between a steel maker and shipbuilding companies becomes important. Schemes of developing e-partnering are presented as follows: implementation of the inter-communication system, day/sequence order and supply, improvement of infrastructure such as transport, quay etc.

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.6
• /
• pp.334-342
• /
• 2016

Conventional eco-design has been implemented based only on the environmental aspects of a product. Key components of a product identified from the analysis of the environmental aspects have been the target for improvement in the conventional eco-design. The use of eco-design index (EDI) considering both the environmental and economic aspects, and utility value (UV) of a product can be envisaged as an alternative way of implementing and assessing the eco-design. The objective of this study was to propose the logic of the EDI and apply it to the components for performing printing function of the multi-function printer. The EDI was formulated by quantifying the UV, life cycle environmental impact (LCE) and life cycle cost (LCC) of the components of a product, here components of the printer. Of the eight components investigated, roller was identified as the best performing consumable in both the environmental and economic aspects. However, its UV was the lowest among the eight. The EDI of the roller was mere $4^{th}$ in ranking out of the eight. Transfer belt ranked $8^{th}$ and $5^{th}$ in the environmental and economic aspects, respectively, while $2^{nd}$ in the utility value with its EDI ranked $3^{rd}$. This indicates that not only the environmental aspects but also economic and utility value aspects should be considered when identifying the key components for improvement in the eco-design.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.17 no.4
• /
• pp.358-383
• /
• 2015

The concept of 'carbon footprint' has been developed as a means of quantifying the specific emissions of the greenhouse gases (GHGs) that cause global warming. Although there are still neither clear definitions of the term nor rules for units or the scope of its estimation, it is broadly accepted that the carbon footprint is the total amount of GHGs, expressed as $CO_2$ equivalents, emitted into the atmosphere directly or indirectly at all processes of the production by an individual or organization. According to the ISO/TS 14067, the carbon footprint of a product is calculated by multiplying the units of activity of processes that emit GHGs by emission factor of the processes, and by summing them up. Based on this, 'carbon labelling' system has been implemented in various ways over the world to provide consumers the opportunities of comparison and choice, and to encourage voluntary activities of producers to reduce GHG emissions. In the agricultural sector, as a judgment basis to help purchaser with ethical consumption, 'low-carbon agricultural and livestock products certification' system is expected to have more utilization value. In this process, the 'cradle to gate' approach (which excludes stages for usage and disposal) is mainly used to set the boundaries of the life cycle assessment for agricultural products. The estimation of carbon footprint for the entire agricultural and forestry sector should take both removals and emissions into account in the "National Greenhouse Gas Inventory Report". The carbon accumulation in the biomass of perennial trees in cropland should be considered also to reduce the total GHG emissions. In order to accomplish this, tower-based flux measurements can be used, which provide a direct quantification of $CO_2$ exchange during the entire life cycle. Carbon footprint information can be combined with other indicators to develop more holistic assessment indicators for sustainable agricultural and forestry ecosystems.

• Journal of the Korea Institute of Building Construction
• /
• v.19 no.6
• /
• pp.529-538
• /
• 2019

Typhoons can cause significant financial damage worldwide. For this reason, states, local governments and insurance companies attempt to quantify and mitigate the financial risks related to these natural disasters by developing a typhoon risk assessment model. As such, the importance of typhoon risk assessment models is increasing, and it is also important to reflect local vulnerabilities to enable sophisticated assessments. Although a practical study of economic losses associated with natural disasters has identified essential risk indicators, comprehensive studies covering the correlation between vulnerability and economic loss are still needed. The purpose of this study is to identify typhoon damage indicators and to develop evaluation indicators for typhoon damage prediction functions, utilizing the loses from Typhoon Maemi as data. This study analyzes actual loss records of Typhoon Maemi provided by local insurance companies to prepare for a scenario of maximum losses. To create a vulnerability function, the authors used the wind speed and distance from the coast and the total value of property, construction type, floors, and underground floor indicators. The results and metrics of this study provide practical guidelines for government agencies and insurance companies in developing vulnerability functions that reflect the actual financial losses and regional vulnerabilities of buildings.