• Journal of Wetlands Research
• /
• v.21 no.1
• /
• pp.34-42
• /
• 2019

Baseflow which is one of the unmeasurable components of streamflow and slowly flows through underground is important for water resource management. Despite various separation methods from researches preceded, it is difficult to find a significant separation method for baseflow separation. This study applied the MRC method and developed the improved approach to separate baseflow from total streamflow hydrograph. Previous researchers utilized the whole streamflow data of study period at once to derive synthetic MRCs causing unreliable results. This study has been proceeded with total nine areas with gauging stations. Each three areas are selected from 3 domestic major watersheds. Tool for drawing MRC had been used to draw MRCs of each area. First, synthetic MRC for whole period and two other MRCs were drawn following two different criteria. Two criteria were set by different conditions, one is flow condition and the other is seasonality. The whole streamflow was classified according to seasonality and flow conditions, and MRCs had been drawn with a specialized program. The MRCs for flow conditions had low R2 and similar trend to recession segments. On the other hand, the seasonal MRCs were eligible for the baseflow separation that properly reflects the seasonal variability of baseflow. Comparing two methods of assuming MRC for baseflow separation, seasonal MRC was more effective for relieving overestimating tendency of synthetic MRC. Flow condition MRCs had a large distribution of the flow and this means accurate MRC could not be found. Baseflow separation using seasonal MRC is showing more reliability than the other one, however if certain technique added up to the flow condition MRC method to stabilize distribution of the streamflow, the flow conditions method could secure reliability as much as seasonal MRC method.

• Progress in Medical Physics
• /
• v.20 no.4
• /
• pp.216-224
• /
• 2009

$^{131}I$ is a radiological isotope being used widely for treatment of cancer as emitting gamma-ray and it is also applied to estimate the function of thyroid for its accumulation in thyroid. However, $^{131}I$ is more difficult to quantitate comapred to $^{99m}Tc$, because $^{131}I$ has multiple energy gamma-ray emissions compared to $^{99m}Tc$ which is a mono energetic gamma-ray source. Especially, scattered ray and septal penetration resulted by high energy gamma ray have a bad influence upon nuclear medicine image. The purpose of this study was to estimate scatter components depending on the different source locations within a phantom using Monte Carlo simulation (GATE). The simulation results were validated by comparing with the results of real experiments. Dual-head gamma camera (ECAM, Chicago, Illinois Siemens) with high energy, general-purpose, and parallel hole collimators (hole radius: 0.17 cm, septal thickness: 0.2 cm, length: 5.08 cm) was used in this experiment. The NaI crystal is $44.5{\times}59.1\;cm$ in height and width and 0.95 cm in thickness. The diameter and height of PMMA phantom were 16 cm and 15 cm, respectively. The images were acquired at 5 different locations of $^{131}I$ point source within the phantom and the images of $^{99m}Tc$ were also acquired for comparison purpose with low energy source. The simulation results indicated that the scattering was influenced by the location of source within a phantom. The scattering effects showed the same tendency in both simulation and actual experiment, and the results showed that the simulation was very adequate for further studies. The results supported that the simulation techniques may be used to generalize the scattering effects as a function of a point source location within a phantom.

• Journal of Korean Society of Forest Science
• /
• v.113 no.1
• /
• pp.118-130
• /
• 2024

Rehabilitation of mining areas can reduce damage to ecosystems. However, the effects of rehabilitation on ecosystem services (ESs) and its contribution to local communities are not well known. Thus, the aims of this study were to clearly identify the ES beneficiaries affected by mining activities, to determine how the beneficiaries profit from surrounding areas in cooperation with local stakeholders, and to manage the rehabilitation areas for the ESs that the beneficiaries want. This study chose 18 ESs (4 provisioning, 7 regulating, 5 cultural, and 2 habitat services) based on The Economics of Ecosystems and Biodiversity. A semi-structured questionnaire survey using an 11-point Likert scale was conducted among 87 community residents to investigate social awareness and identify key ESs. The survey results from two local communities showed high awareness and demands mainly on cultural (mental and physical health, aesthetic appreciation, and recreation) and regulating services (local climate and air quality, and moderation of extreme events). These services were related to the daily lives of residents in local communities, provided positive benefits, and potentially improved the residents' future livelihoods. However, the average questionnaire scores were limited to 6-7 points, indicating that the benefits to local communities were meager. The residents' awareness of provisioning service was negative, even if it provided goods and profit opportunities. This indicated a disconnection between local communities and provisioning services due to forest rehabilitation that did not consider local communities that traditionally relied on specific provisioning services before the onset of mining activities. Future forest rehabilitation in abandoned mine areas must consider the welfare of local communities for sustainable use of rehabilitated forests and enhancing ESs. In this study, only a qualitative evaluation based on frequency analyses was conducted. The quantification and valuation of key ESs are warranted in the future to promote ESs from forest rehabilitation in abandoned mine areas. The study results would be useful for developing site-specific ES promotion strategies for reforesting mine areas.

• Korean Journal of Environmental Agriculture
• /
• v.36 no.3
• /
• pp.175-183
• /
• 2017

BACKGROUND:The Aromatic rice which is characterized by the flavor of Nurungji when cooked rice, and consumption is increasing recently. The purpose of this study was to investigate the physicochemical characteristics and aroma components of five aromatic rice cultivars according to transplanting time. METHODS AND RESULTS: Quantitative analysis of protein, fat, fatty acid and essential amino acid for five aroma rice cultivars(Hyangmibyeo 2 ho, Aromi, Mihyang, Aranghyangchal, Heughyang)and transplanting time was analyzed by crude protein analyzer, gas chromatography (GC), liquid chromatography (LC) and viscosity analysis was done by using rapid viscosity analyzer (RVA). The content of 2-acetyl-1-pyrroline (2AP) was determined by gas chromatography mass spectrometer. (GC-MS) As a result, the average protein and lipid contents were 6.5% and 2.4%, respectively. The content of essential amino acid showed the highest content at 104.4mg/g. There was no significant change in normal nutrients during the transplanting time. By RVA, cv.Hyangmibyeo 2 ho showed the highest peak and total setback viscosities and lowest breakdown viscosity in early transplantation. The content of 2AP in flavor varieties and transplanting time was quantitatively analyzed by GC-MS. Among the cultivars, Aromi showed the highest 2AP contents at $66.7{\mu}g/100gin$ normal transplanting time. CONCLUSION: cv.Aromi and Hyangmibyeo 2 ho were excellent physicochemical properties and 2AP components contents amongaromatic rice cultivars tested. Theiroptimaltime to transplant was at the beginning of June in the area of Miryang.

• Journal of Food Hygiene and Safety
• /
• v.27 no.3
• /
• pp.277-284
• /
• 2012

The objective of this study was to investigate and evaluate microbial contamination levels of leafy greens (perilla leaf and lettuce) and its distributing conditions at different seasons (Feb, May, Aug, and Nov of the year 2011) in order to provide insight into any potential health hazards associated with consumption of these commodities. Leafy greens were collected from a farm located in Geumsan, Chungnam and wholesale markets (WM) and traditional markets (TM) located in Suwon. At the same time, temperature and relative humidity fluctuations experienced by the leafy greens during distribution from the farm to the distribution center were measured by a data logger. The contamination levels of perilla leaf and lettuce were determined by analyzing total plate count. Coliform groups, Bacillus cereus, Escherichia coli, Escherichia coli O157:H7, Salmonella spp., Listeria monocytogenes and Staphylococcus aureus were determined. The contamination levels of total aerobic bacteria, coliform groups and B. cereus in both vegetables sampled during May and August found to be higher than those sampled during February and November. E. coli O157:H7, Salmonella spp., L. monocytogenes were not detected in the vegetables analyzed in this study. There were no significant trends between samples at WM and TM in the contamination levels. Relative humidity of vegetables distributed from the farm to the distribution center showed over 90% during distribution regardless of measured seasons. In the case of background microflora on leafy greens, the density was significantly increased at 20, 30 and $37^{\circ}C$ during storage of 24h. E. coli O157:H7 and B. cereus inoculated on the leaves also showed similar increases in the storage tests. The microbial contamination levels determined in this study may be used as the fundamental data for microbial risk assessment.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.14 no.2
• /
• pp.138-144
• /
• 2010

Purpose: Despite the rapidly changing healthcare environment, healthcare organizations have recognized the importance of patient safety management. But patient safety management has the problem of the lack of participation of members due to the process of focusing on the follow-up service and punishment. The department of nuclear medicine in Uijeongbu St. Mary's Hospital started this research to reduce the near miss and prevent patient safety accidents by both initiating the participatory near-miss-proof activities as an advance management and constructing a system without disadvantages of reporting. In addition, this research aims to establish a differentiated patient safety management system in the department of nuclear medicine. Materials and Methods: 1. Colleting cases of team members' past and present near miss and accidents(First data collection). 2. Quantifying the cases of near miss and accidents after identifying the degree of importance and urgency through surveys(Second data collection). 3. Quantifying cases and indentifying important points of contact through data analysis. 4. Making and standardizing a manual for important points of contact, and initiating participatory activities to prevent errors. 5. Activating web-based community for establishing the report system of near miss. 6. Estimating the result of before and after activities through surveys and focus group interviews. Results: 1) Quantified safety accidents and near miss in the department of nuclear medicine. About 50 near misses a month and one safety accident a year. 2) Establishing improvement measurements based on quantified data. About 11 participatory activities, the improvement of process, a manual for standardization. 3) Creating a system of safety culture and high participation rate of team members. Constructing a report system, making a check list and a slogan for safety culture, and establishing assessment index. 4) Activating communities for sharing the information of cases of near misses and accidents. 5) As the result of activities, the rate of near miss occurrence declined by 50% and the safety accident did not happen. Conclusion: The best service in the department of nuclear medicine is to provide patients with safety-guaranteed high-quality examination and cure. This research started from the question, 'what is the most faithful-to-the-basics way to provide the best service for patients?' and team members' common answer for this question was building a system with participation of all members. Building a system through the participatory improvement activities for preventing near miss and creating safety culture resulted in the 50% decline of near miss occurrence and no accident. This is a meaningful result from the perspective of advance management for patient safety. Moreover, this research paved the way for creating a culture to report and admit near miss or accidents by establishing a report system with no disadvantage of reporting. The system which sticks to the basics is the best service for patients and will form a patient safety culture system, which will lead to the customer satisfaction. Therefore, all members of the department of nuclear medicine will develop a differentiated patient safety culture with stabilizing the established system.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.40 no.2
• /
• pp.225-231
• /
• 2020

Fresh water that can be used by a person of the total amount of water on the planet is increased because it is less than 0.01 % except underground water, ice and snow, etc. water management response need. In order to protect and efficiently utilize water resources, major countries are conducting water footprint studies that can quantitatively estimate the amount of water put into the operating phase of the resource harvesting phase, mainly agriculture. Korea has also recently developed a number of policies in order to cope with water shortages, and in the construction industry, as well as the need for basic research to support it has been emphasized. This study was constructed DB up to the raw material harvesting step, the transport step, the production stage in order to estimate the water consumption of resources to be put into the work process to target the drainage of the road. Water usage estimation method was utilized the method presented in the Water Footprint Manual and the environmental score card certification guide, unit water usage each drainage main method was calculated after estimating the water footprint considering the water character factor, indirect water and the direct water, the water consumption factor of material input to each process. Brown asphalt, rebar, remicon of the drainage material as a result of the water footprint calculation accounted for 97 % of the total. Drainage method is a culvert, a side channel, a culvert wing wall, reinforced concrete open channel accounted for 92.2 % of the total. Drainage total step-by-step calculated water consumption and water footprint was found in order of raw material harvesting step, transport stage, production stage. Water footprint each drainage method or total drainage material calculated in this study can be used as a base data in the agricultural and construction sectors. In order to increase the reliability of the analysis, it is believed that further overseas databases will be needed for continuous review and research.

• Journal of Intelligence and Information Systems
• /
• v.20 no.3
• /
• pp.45-58
• /
• 2014

The Korean Culture Contents spread out to Worldwide, because the Korean wave is sweeping in the world. The contents stand in the middle of the Korean wave that we are used it. Each country is ongoing to keep their Culture industry improve the national brand and High added value. Performing contents is important factor of arousal in the enterprise industry. To improve high arousal confidence of product and positive attitude by populace is one of important factor by advertiser. Culture contents is the same situation. If culture contents have trusted by everyone, they will give information their around to spread word-of-mouth. So, many researcher study to measure for person's arousal analysis by statistical survey, physiological response, body movement and facial expression. First, Statistical survey has a problem that it is not possible to measure each person's arousal real time and we cannot get good survey result after they watched contents. Second, physiological response should be checked with surround because experimenter sets sensors up their chair or space by each of them. Additionally it is difficult to handle provided amount of information with real time from their sensor. Third, body movement is easy to get their movement from camera but it difficult to set up experimental condition, to measure their body language and to get the meaning. Lastly, many researcher study facial expression. They measures facial expression, eye tracking and face posed. Most of previous studies about arousal and interest are mostly limited to reaction of just one person and they have problems with application multi audiences. They have a particular method, for example they need room light surround, but set limits only one person and special environment condition in the laboratory. Also, we need to measure arousal in the contents, but is difficult to define also it is not easy to collect reaction by audiences immediately. Many audience in the theater watch performance. We suggest the system to measure multi-audience's reaction with real-time during performance. We use difference image analysis method for multi-audience but it weaks a dark field. To overcome dark environment during recoding IR camera can get the photo from dark area. In addition we present Multi-Audience Engagement Index (MAEI) to calculate algorithm which sources from sound, audience' movement and eye tracking value. Algorithm calculates audience arousal from the mobile survey, sound value, audience' reaction and audience eye's tracking. It improves accuracy of Multi-Audience Engagement Index, we compare Multi-Audience Engagement Index with mobile survey. And then it send the result to reporting system and proposal an interested persons. Mobile surveys are easy, fast, and visitors' discomfort can be minimized. Also additional information can be provided mobile advantage. Mobile application to communicate with the database, real-time information on visitors' attitudes focused on the content stored. Database can provide different survey every time based on provided information. The example shown in the survey are as follows: Impressive scene, Satisfied, Touched, Interested, Didn't pay attention and so on. The suggested system is combine as 3 parts. The system consist of three parts, External Device, Server and Internal Device. External Device can record multi-Audience in the dark field with IR camera and sound signal. Also we use survey with mobile application and send the data to ERD Server DB. The Server part's contain contents' data, such as each scene's weights value, group audience weights index, camera control program, algorithm and calculate Multi-Audience Engagement Index. Internal Device presents Multi-Audience Engagement Index with Web UI, print and display field monitor. Our system is test-operated by the Mogencelab in the DMC display exhibition hall which is located in the Sangam Dong, Mapo Gu, Seoul. We have still gotten from visitor daily. If we find this system audience arousal factor with this will be very useful to create contents.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.22 no.3
• /
• pp.82-98
• /
• 2019

The importance of spatial information is rapidly rising. In particular, 3D spatial information construction and modeling for Real World Objects, such as smart cities and digital twins, has become an important core technology. The constructed 3D spatial information is used in various fields such as land management, landscape analysis, environment and welfare service. Three-dimensional modeling with image has the hig visibility and reality of objects by generating texturing. However, some texturing might have occlusion area inevitably generated due to physical deposits such as roadside trees, adjacent objects, vehicles, banners, etc. at the time of acquiring image Such occlusion area is a major cause of the deterioration of reality and accuracy of the constructed 3D modeling. Various studies have been conducted to solve the occlusion area. Recently the researches of deep learning algorithm have been conducted for detecting and resolving the occlusion area. For deep learning algorithm, sufficient training data is required, and the collected training data quality directly affects the performance and the result of the deep learning. Therefore, this study analyzed the ability of detecting the occlusion area of the image using various image quality to verify the performance and the result of deep learning according to the quality of the learning data. An image containing an object that causes occlusion is generated for each artificial and quantified image quality and applied to the implemented deep learning algorithm. The study found that the image quality for adjusting brightness was lower at 0.56 detection ratio for brighter images and that the image quality for pixel size and artificial noise control decreased rapidly from images adjusted from the main image to the middle level. In the F-measure performance evaluation method, the change in noise-controlled image resolution was the highest at 0.53 points. The ability to detect occlusion zones by image quality will be used as a valuable criterion for actual application of deep learning in the future. In the acquiring image, it is expected to contribute a lot to the practical application of deep learning by providing a certain level of image acquisition.

• Archives of design research
• /
• v.18 no.3 s.61
• /
• pp.199-208
• /
• 2005

This study analysis if the concepts of kitsch and vernacular remains as cultural elements for product design. Because their function and aesthetic value have vivid possibilities for general product design fields. For the purpose, this study limits its range within post modernism, kitsch, and vernacular, and analyzes their relationships. Against functionalism, post modernism had cultural pluralisms to approach into popular styles, and some of them was amusing design. That post modernism designs stimulated human beings' emotion by decorations or some symbolic forms from specific objects is similar to the symbolism, regionalism, or pluralism of kitsch or vernacular. Kitsch is a free style that is not limited in any specific trends. It is a Meta culture that has influenced into various fields including design, so kitsch does not have a parallel position with a product or design. In product design, kitsch is the behavior and result of imitating existing objects' images. It could have amusement according to which objects are imitated. So if human beings feel amusement by kitsch, it could be same as the direction of post modernism. Kitsch is determined by design atmospheres. They cannot be specified abjectly, and can be different according to people. With symbolism and regionalism, kitsch and vernacular appeared according to people's needs. While kitsch is consumer's tastes-oriented, vernacular is cultural tradition-oriented. Kitsch has symbolism that specifies products' functions or design concepts, and it is a communication method between human being and products. Because vernacular is province-oriented, it has a lot of styles according to regional living environments and cultural differences. So vernacular design reflects continued traditional lifestyles. By restorative memory, regionalism, cultural pluralism, amusement, and symbolism, kitsch and vernacular could be understood the sub or parallel concepts of post modernism. They might be easily miss-understood mixed concepts that have western and national characters. But in kitsch and vernacular concept, modernizing pas by using the pluralism of post modernism should be considered positive. So, the range of the further study is also supposed to be focused on more widened fields to, to establish cultural identification in design.