• Journal of the Korean Magnetics Society
• /
• v.25 no.3
• /
• pp.92-100
• /
• 2015

Electric Vehicle (EV) can be categorized by the driving method into in-wheel and in-line types. In-wheel type EV does not have transmission shaft, differential gear and other parts that are used in conventional cars, which simplifies and lightens the structure resulting in higher efficiency. In this paper, design method for in-wheel motor for automobiles using Parameter Map is proposed, and motor with continuous power of 5 kW is designed, built and its performance is verified. To decide the capacity of the in-wheel motor that meets the automobile's requirement, Vehicle Dynamic Simulation considering the total mass of vehicle, gear efficiency, effective radius of tire, slope ratio and others is performed. Through this step, the motor's capacity is decided and initial design to determine the motor shape and size is performed. Next, the motor parameters that meet the requirement is determined using parametric design that uses parametric map. After the motor parameters are decided using parametric map, optimal design to improve THD of back EMF, cogging torque, torque ripple and other factors is performed. The final design was built, and performance analysis and verification of the proposed method is conducted by performing load test.

• Korean Journal of Acupuncture
• /
• v.22 no.4
• /
• pp.43-56
• /
• 2005

Objectives : The acupuncture has been used as treatment of disease in the oriental medicine. In this study, it was investigated at had an effects of Heart JEONGGYEOK(心正格) of SAAM five evolutive phase acupuncture techniques(舍岩五行鑛法) for appling deficiency in the heart induced by experimental focal ischemia. Materials and methods : The focal ischemia was induced by middle cerebral artery occlusion for 2hours. The groups divided into 6 groups, normal(intactness group), control(no therapy group after ischemia-induced), AT1(reinforcing acupoint of Heart JEONGGYEOK : acupuncture therapy group at LR1, HT9 after ischemia-induced), AT2(reinforcing acupoint of Kidney JEONGGYEOK : acupuncture therapy group at LU8, KI7 after ischemia-induced) AT3(combination of reinforcing acupoint of Heart JEONGGYEOK and Kidney JEONGGYEOK : acupuncture therapy group at LR1, HT9, LU8, KI7 after ischemia-induced) AT4(reinforcing and reducing acupoint of Heart JEONGGYEOK : acupuncture therapy group at LR1, HT9, HT3, KI10 after ischemia-induced), AT4(reinforcing and reducing acupoint of Heart JEONGGYEOK : acupuncture therapy group at LRI, HT9, HT3, KI10 after ischemia-induced). Acupuncture therapy was carried out during 3 weeks after focal ischemia-induced. Eight-arm radial maze was used for the behavioral task and neuropretective effect of acupuncture therapy was observed by Cresyl violet, AchE, ChAT-stain. Results : The error rate in the eight-arm radial maze task was significantly decreased in AT3 group on 3days, in AT1 and AT4 groups on 4days, in AT3 and AT4 groups on 5days compared to the control group. The rate of correct choice was significantly increased AT4 group compared to the control group. The density of neurons in the hippocampal CA1 were significantly increased in all experiment groups, AT1, AT2, AT3 and AT4 groups compared to the control group. The density of AchE in the hippocampal CA1 was significantly increased in AT4 group compared to the control group. The density of ChAT in the hippocampal CA1 were significantly increased in AT1 and AT3 group compared to the control group. Conclusions : These results suggest that reinforcing and reducing acupoint of Heart JEONGGYEOK could be used as a medication for controlling the stroke by deficiency in the heart.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.559-559
• /
• 2013

KSTAR (Korea Superconducting Tokamak Advanced Research) 장치는 차세대 에너지원 중의 하나인 핵융합로를 위한 과학기술 기반을 마련하기 위해 개발된 중형급 토카막 실험장치로서 토카막 운전 영역의 확장과 안정성 확보, 정상상태 운전 도달을 위한 방법 연구, 최적화된 플라즈마 상태와 연속 운전 실현 등을 주요 목표로 하고 있다. 이를 위해 핵융합 반응에 의한 점화조건과 가까운 상태로 플라즈마를 가열해주어야 하며, 토카막 장치의 저항가열 이외에도 외부에서 추가 가열이 반드시 필요하다. 중성 입자빔 입사 장치는 현재 토카막에서 사용되고 있는 가열장치 중 가장 신뢰성있는 추가 가열 장치라 할 수 있으며 한국 원자력연구원에서는 1997년부터 KSTAR 토카막 실험 장치에 사용될 중성 입자빔 입사 장치를 개발해왔었다. 중성빔 입사 장치는 크게 이온원, 진공함, 열량계, 진공 펌프, 중성화 장치, 이온덤프와 전자석으로 이루어져 있으며, 이중 이온원은 중성빔의 성능을 좌우하는 핵심적인 장치라 할 수 있다. 최근 한국원자력연구원에서는 2 MW 중성 입자빔 입사장치용 이온원 개발을 완료하여 KSTAR 토카막 장치에 설치하였으며, 2013년 현재 KSTAR에는 총 두 개의 이온원이 장착되어 최대 약 3 MW 이상의 중수소 중성 입자빔을 입사하여 KSTAR 토카막 실험의 H-mode 달성과 운전 시나리오 연구에 많은 기여를 하고 있다. 한국원자력연구원에서 최초로 개발된 이온원은 미국 TFTR 장치에서 사용되었던 US LPIS (Long Pulse Ion Source)를 기본으로 하여 국내 개발을 수행하였다. 이 온원은 크게 플라즈마를 발생시키는 플라즈마 발생부와 발생된 이온을 인출 및 가속시키는 가속부로 구성되는데, 개발과정에서 가장 먼저 KSTAR의 장주기 운전에 적합하도록 플라즈마 방전부와 가속부의 냉각회로를 요구되는 열부하에 맞게 설계 수정하였다. 그 후 플라즈마 방전부는 방전 시간과 안정성, 플라즈마 밀도의 균일도, 정격 운전, 방전 효율 등을 고려하여 수정 보완하며 개발을 진행하여왔다. 가속부의 경우 국내 제작기술의 한계를 극복하기 위해 빔 인출그리드를 TFTR의 US LPIS 모델의 슬릿형 그리드 타입에서 원형 인출구 타입으로 변경하였으며, 이후 가속 전극의 고전압 내전력 문제, 빔 인출 전류와 전력, 인출 빔의 광학적 질(quality), 빔 인출 시간 동안의 안정성 등을 위해 그리드의 크기와 간격, 모양 등을 변경하여 개발을 수 행하여 왔다. 이 논문은 한국원자력연구원에서 개발이 진행되어 왔던 이온원들을 시간적으로 되짚어 보면서 현재까지의 성과와 문제점, 그리고 앞으로의 개발 방향에 대해 논의하고자 한다.

• Journal of Acupuncture Research
• /
• v.24 no.2
• /
• pp.141-153
• /
• 2007

Objectives: The purpose of this report is to examine the effect of $BL_{66}$ ${\cdot}$ $GB_{43}$ supplement and LIl ${\cdot}$ $GB_{44}$ draining in acupuncture for cerebral apoplexy treatment. Methods : I designed to investigate whether $BL_{66}$ ${\cdot}$ $GB_{43}$ supplement and $LI_1$ ${\cdot}$ $GB_{44}$ draining in acupuncture affects cerebral hemodynamics [regional cerebral blood flow(rCBF), mean arterial blood pressure(MABP)] in normal rats, and to make manifest whether $BL_{66}$ ${\cdot}$ $GB_{43}$ supplement and $LI_1$ ${\cdot}$ $GB_{44}$ draining in acupuncture is mediated by cyclooxygenase or guanylate cyclase. The changes of rCBF and MABP were determinated by laser-doppler flowmetry(LDF). Results : 1. $BL_{66}$ ${\cdot}$ $GB_{43}$ supplement and LI1 ${\cdot}$ $GB_{44}$ draining in acupuncture increased rCBF significantly, but decreased MABP. These results suggest that $BL_{66}$ ${\cdot}$ $GB_{43}$ supplement and $LI_1$ ${\cdot}$ $GB_{44}$ draining in acupuncture increased significantly rCBF by dilating pial arterial diameter(PAD). 2. By pretreatment with indomethacin(1 mg/kg, i.p.), the effect of $BL_{66}$ ${\cdot}$ $GB_{43}$ supplement and $LI_1$ ${\cdot}$ $GB_{44}$ draining in acupuncture induced increase of rCBF was significantly inhibited, the decreased MABP by treatment with $BL_{66}$ ${\cdot}$ $GB_{43}$ supplement and $LI_1$ ${\cdot}$ $GB_{44}$ draining in acupuncture was increased. 3. By pretreatment with methylene blue($10{\mu}/kg$, i.p.), the increased rCBF by treatment with $BL_{66}$ ${\cdot}$ $GB_{43}$ supplement and $LI_1$ ${\cdot}$ $GB_{44}$ draining in acupuncture was decreased conversely, the decreased MABP by treatment with $BL_{66}$ ${\cdot}$ $GB_{43}$ supplement and $LI_1$ ${\cdot}$ $GB_{44}$ draining in acupuncture was decreased. and then increased. Conclusion : I suggest that $BL_{66}$ ${\cdot}$ $GB_43$ supplement and $LI_1$ ${\cdot}$ $GB_{44}$ draining in acupuncture has an anti-ischemic effect through the improvement of cerebral hemodynamics.

• Journal of the Korean Institute of Telematics and Electronics T
• /
• v.35T no.1
• /
• pp.90-98
• /
• 1998

This paper is to describe the improved vector control which can control the induction motor robustly in low speed. When the induction motor is drived with low speed, below 10 percent of the rated speed, an algorithm which can compensate the error of unit vector angle generated by the harmonics is proposed. Another algorithm which can be tuned to the rotor time constant so that nay be robust to the rotor parameter change in low speed and transient state was proposed. The ripple of flux and torque was reduced by the proposed vector control and then the stable output characteristics was obtained in low speed. When the input and output is sinusoidal, the proposed vector control, the direct vector control and the indirect vector control were analyzed and compared in the low speed characteristics. And each control characteristics is compared and analyzed in state of containing harmonics. The estimation and tunning performance of rotor time constant is confirmed with simulation. The whole control system is implemented by real hardware and experimented to compare the proposed vector control with the direct vector control. As a result of the experiment with two control methods in low speed, the torque ripple of the proposed vector control is improved by 45 percent than the direct vector control. And it is confirmed that the flux current ripple is reduced in 0.2 p.u. and torque current ripple is reduced in 0.6 p.u. It is confirmed that the rotor time constant by the estimation and the tunning algorithm is tunned by the real rotor time constant. Finally, it was confirmed that the validity and robustness for the proposed vector control in low speed existed.

• The Journal of the Convergence on Culture Technology
• /
• v.1 no.1
• /
• pp.37-64
• /
• 2015

This technical research paper attempts to examine literature therapeutic significance of Sijo. This research analyzes how the therapeutic mechanisms of literature or sentence can be physiologically applied to human nerve system. To study such interactions between therapeutic mechanisms of literature and human physiological mechanisms, diverse on- and offline Sijo activities, such as a Facebook group "Sijoya Nolja", were studied, as well as various publications in literature and medicine. For the three years this research was being conducted, 27 out of 488 Sijo poets debuted through Sinchunmunye, and many have gone professional through various contests. 19 of them became members of Sijo Poet Associations of Korea, with globalization of Sijo in mind. Their aggressive activity proves that the quality of live was elevated through literature therapy. The therapeutic effects are especially dramatic for older authors, and authors with traumatic experience. Through this research, Sijo turned out to be a form of literature with the quickest effect on elevating quality of life. To solve problems such as depression, emotional isolation, and other mental conditions, literature therapy through Sijo should be implemented, and therapeutic approach of literature should be more professionalized.

• Plant Journal
• /
• v.13 no.2
• /
• pp.46-51
• /
• 2017

In this study, the boiler efficiency and the change of boiler combustion state with the burner operation of the uppermost layer of 870MW opposite fired coal boiler were measured. Test results showed that the boiler efficiency was high in the order of the uppermost layer simultaneous operation of the front and rear burners, the front burner, and the rear burner operation. When the front and rear burners were operated simultaneously, the heat absorption rate of water walls in the boiler furnace was uniform at four side, and the temperature deviation of the left and right steam on the convection front surface decreased. As the heat absorption rate of the boiler improved, the loss of boiler exhaust gas decreased and the coal supply amount decreased by 8 tons/hour compared to the operation of the rear burner. This will contribute not only to the reduction of fuel cost but also to the reduction of greenhouse gas emissions.

• Plant Journal
• /
• v.15 no.3
• /
• pp.29-34
• /
• 2019

In the study, the effect of steam injection on syngas productivity was investigated under the constant operating conditions of gasifier oxygen load while the coal feed was fixed and the steam injection flow rate is changed in Taean IGCC plant. The maximum syngas average productivity was found to be at 80 % and 90 % of gasifier oxygen loads with the steam injection flow rate of 0.14 kg/s and 0.15 kg/s per coal burner. Through this study, the syngas productivity was changed by adjusting the steam injection amount and as the steam injection flow rate increased, the syngas productivity increased and then decreased again. The syngas productivity can be increased only by steam injection without supplying additional coal and it is considered that the syngas productivity has different characteristics depending on coal type. Thus it is recommended to operate the gasifier using Carbo-One coal with the steam injection flow rate of about 0.14 kg/s per coal burner when the gasifier oxygen load is 80 % ~ 90 %.

• Fire Science and Engineering
• /
• v.34 no.3
• /
• pp.43-48
• /
• 2020

The purpose of this study is to develop an earth leakage alarm circuit breaker, equipped with a leakage alarming function (JER-E2S, ETECKOREA Co., Korea), and to analyze its characteristics. The developed mechanism is exclusively used for single-phase and 220 V circuits, with a rated current of 32 A, 20 A, 20 A (for restrooms), 16 A, etc. It satisfies all characteristics of existing earth leakage circuit breakers (ELB). If a fire current, which is a resistive leakage current (Igr), flows through an electric line, the device detects the leakage current in real time and warns against the leakage through a blinking LED lamp. Since the developed device displays a tolerance to a capacitative leakage current (Igc) that inevitably occurs in LED lamps, communication devices, etc., it ensures a stable power supply. In addition, the earth leakage alarm circuit breaker protects against power failure due to a momentary ground fault. Therefore, it can supply power without the risk of the circuit breaker malfunctioning due to a momentary ground fault caused by water droplets, leaves, etc. Moreover, with a standby power of less than 0.1 W, the developed earth leakage alarm circuit breaker exhibits a power saving performance that is 3~8 times greater than that of other ELBs. Installation of approximately 10 earth leakage alarm circuit breakers in one apartment household, with an area of 120 ㎡, can save 2~5 kWh per month. Therefore, the developed earth leakage alarm breaker not only satisfies the characteristics of existing earth leakage breakers, but also exhibits outstanding power supply quality since it has the functions of electric fire prevention and malfunction prevention. Therefore, this device can innovatively contribute to electric fire prevention.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.9
• /
• pp.2280-2288
• /
• 2014

The conventional dimming control methods of LED (Light-emitting dioades) include Analog, PWM (Pulse Width Modulation), and FM (Frequency Modulation) Control. Analog dimming is controlled by adjusting forward current of Power LED. Although Analog dimming is possible to control linearly the brightness levels on a whole range (0%~100%), it comes into existence a variation of wavelength by changing the Power LED's forward current. PWM dimming has achieved by varying in duty of full current flowing to the Power LED. Generally, PWM dimming doesn't make variation of wavelength but have difficulty with adjusting the linear brightness level between 0% and 10%. FM dimming method is on the same wavelength as PWM dimming, however, it has problem of flickering at low level of dimming. This paper propose a efficient dimming control method of Power LED in order to overcome the disadvantages of the above mentioned methods. We apply to Analog method in low level of dimming control and use PWM method in dimming range from 10% to 100%. For the experiment, we design and implement a circuit and test the proposed method. Consequently, we can control the linear brightness of Power LED across the whole range and get the constant wave at different dimming level. The experimental results show the benefits of the proposed method.