• Proceedings of the KWS Conference
• /
• 1998.10a
• /
• pp.97-100
• /
• 1998

• Proceedings of the KWS Conference
• /
• 2000.10a
• /
• pp.301-304
• /
• 2000

• Journal of Welding and Joining
• /
• v.7 no.2
• /
• pp.12-24
• /
• 1989

천이액상확산접합법은 접합계면에 일시적으로 액상이 형성되기 때문에, 고상확산접합법과 비교 하여 비교적 쉽게 금속결합을 이룰 수 있을 뿐만 아니라, 정밀하게 표면을 가공할 필요가 없으 며, 접합압력이 거의 필요 없다는 것이 잇점이라고 할 수 있다. 도한, 접합온도에서 등온응고되 기 때문에, 브레이징법과 비교하여 접합계면에 취약한 금속간화합물(Metallic Compound)이 생 성되지 않으므로, 기계적성질 및 내식성이 우수한 접합이음부를 얻을 수 있다는 잇점이 있다. 따라서, 본 접합법은 원리적으로 모재(Base Metal)와 거의 같은 정도의 물리적, 화학적, 기계적 성질을 갖는 접합이음부(Joint or Bonded Interlayer)를 얻을 수 있는 접합법이라고 생각되어진 다. 본 해설에서는 천이액상확산접합법의 기본원리, 접합기구, 접합인자 및 실용된 예에 대해서 서술하고자 한다.

• Journal of Korean Society of Steel Construction
• /
• v.29 no.4
• /
• pp.323-330
• /
• 2017

The pre-engineered building(PEB) construction has been gradually applied to single story buildings as a practical and efficient alternative to conventional buildings. However, there has been a few structure collapse due to suddenly excessive load. Although a structure design requires accurate and professional skills, the PEB system tends to be designed simply because of complexation of structural analysis for connections. This paper shows the finite element analysis(FEA) using ABAQUS software on bolted connection which was previously tested. The FEA condignly simulated the behavior of bolted connection in PEB system and was in close agreement with experimental results. Then the stiffness reduction factor of the bolted joints that can be used in the actual design is presented through the analysis of the joint parameters.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.11a
• /
• pp.211-215
• /
• 2004

본 연구에서는 2개 이상의 지리 부호화된 영상병합 시 중복 영역의 연결 부분에서 발생하는 방사적 차이를 최소화하여 모자이크 접합선이 최소화하는 알고리즘을 구현하였다. 연구내용을 세부적으로 보면 초기 접합선 및 최적 접합선 탐색을 하는 접합선 추출 알고리즘 구현, 대상 영상의 전체적인 방사 값의 분포 특성을 정규화하는 전역 방사 보정을 위한 알고리즘 구현, 접합선을 자동 탐색하여 탐색된 접합선을 중심으로 단순 중복, 평균화, 블랜딩에 의한 모자이킹 알고리즘 구현이 본 연구의 핵심 내용이다.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.1
• /
• pp.28-35
• /
• 2017

In this study, specimens of rigid frame joint were produced by integrating joints with adhesive and other specimens were produced by inserting a wooden gusset integrated with a column member into a slit-processed beam member and joining them with pins. Then the moment resistance performances of the specimens were examined. For the wooden gusset, a GFRP-reinforced wooden gusset was used. The calculation results of perfect elasto-plasticity for the frame specimens for which a GFRP-reinforced wooden gusset was inserted into and joined with the slit-processed beam member by pins were 20-80% lower compared to the control group which consisted of steel plate-inserted frame specimens. The rigid frame specimens for which the column and beam members have been integrated with adhesive showed almost no initial residual transformations, as well as 38% greater initial rigidity and 41% greater plasticity compared to the steel plate-inserted joint.

• Journal of the Korean Electrochemical Society
• /
• v.10 no.4
• /
• pp.279-282
• /
• 2007

When reformer for fuel cell is used, CO in hydrogen gas leads to a seriously decreased membrane electrode assembly (MEA) performance by catalyst poisoning. The effect of CO on performance of modified MEA by sputtering method is studied in this paper. The experimental results show that sputtered Pt and Ru thin film improve a single cell performance of MEA and sputtered metal thin film has a CO tolerance. The air injection process on anode show improved CO tolerance test result. Moreover, Pt, Ru and PtRu thin film by sputtering had influence on the CO tolerance with air injection process.

• Proceedings of the KWS Conference
• /
• 1999.10a
• /
• pp.198-201
• /
• 1999

• Proceedings of the KWS Conference
• /
• 1999.10a
• /
• pp.179-180
• /
• 1999

• Proceedings of the KWS Conference
• /
• 1995.10a
• /
• pp.225-226
• /
• 1995