• Korean Journal of Materials Research
• /
• v.3 no.6
• /
• pp.668-677
• /
• 1993

The microstructural and shear tests of STS304/, STS430/ and low-C steel/Cu joints brazed using Cu-P, Cu-P-Sn(four type) and Cu-P-Sn-Ag(three type) filler metals at 1003 and 1033K for 1.2ks in Ar atomsphere were performed. Interfacial microstructures were divided into three type ; first, reaction layer contained cracks second, dispersed layer without cracks third, dispersed layer and reaction layer contained cracks. The joints composed only of dispersed layer without cracks have the high shear strength of above 40-60 MPa and result in failure in copper base metal. Low shear strength and joint failure result from the formation of reaction layer which induced cracks. The reaction layer is a Fe-P compound. This tendency of microstructure and shear strength depends on the existence and/or nonexistence of Sn in filler metals as well as Ni (and Cr) in base metals.

• Journal of Periodontal and Implant Science
• /
• v.27 no.2
• /
• pp.395-409
• /
• 1997

성견의 2면 골내낭에서 calcium sulfate 이식이 치조골 및 백악질 재생 능력과 접합상피의 근단이동에 미치는 영향에 대해 알아보고자 3마리 성견의 상하악 제3대구치 근심면을 연결하는 깊이 4mm, 너비 4mm의 2면 골내낭을 외과적으로 형성하고 calcium sulfate를 이식한 군을 시험군으로, 치은박리술만을 실시한 군을 대조군으로 설정하였다. 술후 8주후에 치유결과를 접합상피의 길이, 백악질 형성, 치조골 형성, 결합조직 유착으로 나누어 조직학적으로 비교 관찰하여 다음과 같은 결과를 얻었다. 1. 접합상피의 길이는 대조군에서 2.28mm, 실험군에서 0.51mm로 나타났으며, 대조군과 실험군간에 유의성 있는 차이가 있었다(p<0.05). 2. 백악질 형성은 대조군에서 1.33mm, 실험군에서 2.59mm로 나타났으며, 대조군과 실험군간에 유의성 있는 차이가 있었다(p<0.05). 3.치조골 형성은 대조군에서 1.02mm, 실험군에서 2.30mm로 나타났으며, 대조군과 실험군간에 유의성 있는 차이가 있었다(p<0.05). 4. 결합조직 유착은 대조군에서 0.50mm, 실험군에서 1.14mm로 나타났으며, 대조군과 실험군간에 유의성 있는 차이가 있었다(p<0.05). 이상의 결과를 본 실험상의 한계내에서 고려하여 볼 때, calcium sulfate는 2면 골내낭의 치주치료에 치조골 및 백악질 재생 효과가 있으며 안전하고 경제적인 골 이식재 재료로 사용될 수 있으리라 사료된다.

• Journal of the Korean Wood Science and Technology
• /
• v.27 no.3
• /
• pp.23-30
• /
• 1999

have been many studies to analyze the behavior of metal plate connector that most widely used to connect light frame wood trusses. Finite element method{FEM) was one of the methods for those studies. FEM using linear model may well be applicable to predict the initial slope of load-displacement curve for metal plate connection. However, displacement may be overestimated above experimental results with the increase of load. Therefore, linear model cannot be used for the nonlinear behavior part. To predict real behavior more exactly, nonlinear term was included to FEM model in this study. It was found out that EA and AA mode showed the high agreement between predicted results and experimental ones. However, EE and AE mode showed a little difference between predicted results and experimental ones in nonlinear part. This results might be caused by insufficient reflection of the slip effect. Consequently, the effect of slip shall be considered to approve the accuracy of nonlinear analysis for the behavior of metal plate connection.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2013.10a
• /
• pp.206-213
• /
• 2013

Transient response of a crack in a functionally graded piezoelectric material (FGPM) interface layer between two dissimilar homogeneous piezoelectric layers under anti-plane shear is analyzed using integral transform approaches. The properties of the FGPM layer vary continuously along the thickness. Laplace and Fourier transforms are used to reduce the problem to two sets of dual integral equations, which are then expressed to the Fredholm integral equations of the second kind. Numerical values on the dynamic energy release rate (DERR) are presented for the FGPM to show the effects on electric loading, gradient of the material properties, and thickness of the layers. Computed results yield following conclusions: (a) the DERR increases with the increase of the gradient of the material properties of the FGPM layer; (b) certain direction and magnitude of the electric impact loading impedes crack extension; (c) increase of the thickness of the FGPM layer and the homogeneous piezoelectric layer which has larger material properties than those of the crack plane are beneficial to increase of the resistance of transient fracture of the FGPM layer.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.7
• /
• pp.613-624
• /
• 2002

Electrical characteristics of two types of 20 GHz Push-Push GaAs MESFET dielectric resonator oscillators having Wilkinson and T-junction power combiners for the output stage have been investigated and compared. So we have explained that the output power and phase noise properties of the Push-push FET DRO are depending on return loss and isolation characteristics of power combiner at the fundamental and the second harmonic frequencies. A Push-push oscillator for suppressing the fundamental frequency of 10 GHz and enhancing the second harmonic of 20 GHz has been designed and fabricated in microstrip configuration on 20 mil thick RT-Duroid($\varepsilon$$_{r}$ = 2.52) Teflon substrate. Return loss and isolation characteristics of T-junction and Wilkinson have been measured at the fundamental frequency of 10.2 GHz and the second harmonic frequency of 20.5 GHz. At the fundamental frequency, -12 dB return loss and -3.7 dB isolation have been measured for the T-junction power combiner, and -14 dB return loss and -11 dB isolation fur the Wilkinson power combiner. At the second harmonic frequency, -10 dB return loss and -7.5 dB isolation have been obtained for the T-junction power combiner, and -23 dB return loss and -22 dB isolation for the Wilkinson power combiner. As a result, we have confirmed that the oscillator based on the Wilkinson power combiner with better retrun loss and isolation characteristics produces more output power and better phase noise characteristics..

• Korean Journal of Microbiology
• /
• v.46 no.1
• /
• pp.38-45
• /
• 2010

The study performed to identify the type of ESBL against strains which are producing extendedspectrum ${\beta}$-lactamases and isolated from sewage in Suyeong sewage disposal plant, Busan Environmental Corporation. By the standard activated sludge method, Suyeong sewage disposal plant purify living and lavatory sewage gathering from the northeast Busan and the facility purify total 550,000 tons of living sewage disposal a day. 14 strains were isolated by double disk synergy test and the third generation cepha-antibiotics test. Indole, methyl-red, Voges-Proskauer, Simmon's citrate, decarboxylasedihydrolase and sugar-fermentation tests identified as Klebsiella pneumoniae (n=4) and Escherichia coli (n=10). Plasmid-mediated transmission test against isolated 14 strains proved 11 strains transmitted resistance to recipient E. coli J53 (sodium $azide^R$, $ceftazidime^S$). 9 strains of conjugant were expressed ESBL genes transferred from parental strain but 2 conjugants did not expressed. The type of ESBL from each strain was determined by isoelectric focusing points, DNA and amino acids sequencing. The results indicated that the types of ESBL transmitted to recipient E. coli J53 were TEM-1, the parental TEM type and SHV-12 type.

• The Korean Journal of Physiology
• /
• v.24 no.1
• /
• pp.1-13
• /
• 1990

The effects of electrolytes, adenosine, ATP, 5-hydroxytryptamine (5-HT, serotonin) and ketanserin on the inhibitory junction potentials (IJPs) were investigated to clarify the interactions of these drugs with the neurotransmitters released from non-adrenergic, non-cholinergic nerves in the antrum of guinea-pig stomach. Electrical responses of antral circular muscle cells were recorded intracellularly using glass capillary microelectrode filled with 3 M KCI. All experiments were performed in Tris-buffered Tyrode soluition which was aerated with 100% $O_{2}$ and kept at $35^{\circ}C$. The results obtained were as follows: 1) Inhibitory junction potential (IJP) was recorded in antral strip, while excitatory junction potential (EJP) was recorded in fundic strip. 2) IJP recorded in antral strip was not influenced by atropine $(10^{-6}\;M)$ and guanethidine $(5{\times}10^{-6})$. 3) The amplitude of IJP increased in high $Ca^{2+}$ solution, while that of IJP decreased in high $Mg^{2+}$ solution or by $Ca^{2+}$ antagonist (verapamil). Apamin, $Ca^{2+}$-activated $K^{+}$ channel blocker blocked IJP completely. 4) ATP and adenosine decreased the amplitude of IJP. 5) 5-HT decreased the amplitude of IJP with no change of the amplitude of slow waves, while ketanserin (5-HT type 2 blocker) decreased the amplitude of slow waves markedly with no change in that of IJP. From the above results, the following conclusions could be made. 1) IJP recorded in antral strip is resulted from neurotransmitters released from non-adrenergic, non-cholinergic nerves. 2) An increase in the concentration of external $Ca^{2+}$ enhances the release of neurotransmitters from non-adrenergic, non-cholinergic nerves which activate the $Ca^{2+}$-dependent $K^{+}$ channel.

• Journal of the Microelectronics and Packaging Society
• /
• v.28 no.2
• /
• pp.29-37
• /
• 2021

The effect of Ar/N₂ two-step plasma treatment on the quantitative interfacial adhesion energy of low temperature Cu-Cu bonding interface were systematically investigated. X-ray photoelectron spectroscopy analysis showed that Ar/N₂ 2-step plasma treatment has less copper oxide due to the formation of an effective Cu4N passivation layer. Quantitative measurements of interfacial adhesion energy of Cu-Cu bonding interface with Ar/N₂ 2-step plasma treatment were performed using a double cantilever beam (DCB) and 4-point bending (4-PB) test, where the measured values were 1.63±0.24 J/m² and 2.33±0.67 J/m², respectively. This can be explained by the increased interfacial adhesion energy according phase angle due to the effect of the higher interface roughness of 4-PB test than that of DCB test.

• Journal of Welding and Joining
• /
• v.13 no.2
• /
• pp.32-41
• /
• 1995

본 고에서는 경년열화의 종류, 열화의 판정방법 등에 관한 일반사항과 열화 및 수명예측 문 제를 해결하기 위한 문제점등을 기술하였고, 그 동안 연구되어진 열화 현상에 의한 재료강도의 저하현상을 설명하였다. 또한 열화현상은 비파괴 판정만으로 수명예측이 어려우므로 시간에 따라 진행하는 열화의 진행곡선이 반드시 필요할 것이다. 이와 같이 열화진행 정도를 추정하기 위해 열화재의 가속제작 방법과 레이저 빔의 고온의 열원을 이용한 열화 치료 가능성을 제시 하였다. 아울러 열화치료에 대해 정도높은 방법에 제시된다면 기존 기계구조물을 안전하고, 지속적으로 사용하여 경제적인 손실을 줄일 수 있을 것으로 기대한다.

• The Optical Journal
• /
• s.123
• /
• pp.22-25
• /
• 2009

III-V족 화합물반도체 태양전지중 다접합 구조 태양전지와 집광형 태양전지는 제 3세대 태양전지로서 주목받고 있다. 현재 가장 간단하고 저렴한 원가를 갖는 구조가 프레넬 렌즈 1장을 사용한 구조로서 현재의 광학시설과 인프라만으로도 많은 부분을 개선할 수 있을 것이라 확신한다. 렌즈를 활용하여 집광한 빛을 한곳으로 모으로 이를 셀에 균일한 강도로 손실 없이 전송하기 위한 기하광학적 설계기술이 필요하며 이러한 설계와 조명설계를 결합하여 광시스템을 구축하는 것이 무엇보다 중요하다. 현재 나라마다의 다양하고 적극적인 개발노력으로 인하여 수년 안에 기존보다도 훨씬 효율성 높고 실용적인 태양집광시스템이 개발되리라 기대한다.