• The Journal of Korean Academy of Prosthodontics
• /
• v.55 no.4
• /
• pp.419-426
• /
• 2017

In implant restorations, it is difficult for the patient to percept any symptoms. In addition, they are absent of shock absorbers, which can lead to mechanical failure if stress distribution is not considered. Since maxillary anterior multiple-implant restorations play a significant role in guiding the functional movement of the mandible by distributing lateral force, it is crucial to form appropriate occlusion. The use of the T-scan system is more advantageous in assessing 'dynamic occlusion', such as the change of occlusion over time, the amount of tooth contact during functional movement, and assessing the occlusion in the less-visible posterior teeth. The case is reported as it has satisfactory results in harmonious anterior guidance of a maxillary anterior multiple-implant restoration using T-scan analysis.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.15 no.2
• /
• pp.61-69
• /
• 2011

In this paper, the factors affecting the dynamic characteristics of a polyurethane spring restoring disk bearing are analysed to predict the dynamic behavior of the bearing. The prediction results and the test results are compared. The Young's modulus of the polyurethane spring, which varies according to strain of spring and the friction coefficient, of PTFE (PolyTetraFluoroEthylene), which varies according to the velocity and pressure of PTFE, are considered as the factors influencing the dynamic characteristics. W-PTFE virgin products are used and polyurethane springs are produced for the tests. The equation related to changing the friction coefficient and the modulus of elasticity are obtained through an inverse estimation of the test results. The estimation results, considering the factors affecting the dynamic characteristics, simulate the test results more appropriately than the estimation without the consideration of those factors.

• Applied Chemistry for Engineering
• /
• v.29 no.6
• /
• pp.799-804
• /
• 2018

The separation and purification of 2,6-dimethylnaphthalene (2,6-DMN) present in the light cycle oil (LCO) fraction was investigated by a crystallization operation. Solute crystallization (SC) was performed using LCO fraction and iso-propyl alcohol as a raw material and a SC solvent, respectively. Increasing the operation temperature and volume ratio of the solvent to the raw material (S/F) resulted in improving the purity of 2,6-DMN, whereas the yield decreased. As a result of the crystallization operation in three steps containing the SC using LCO fraction (13.9% 2,6-DMN) and isopropyl alcohol, the re-crystallization 1 (RC 1) using the crystals recovered by SC and methyl acetate, and RC 2 using the crystals recovered by RC 1 and methyl acetate, the crystal with 99.9% 2,6-DMN was recovered with 19.5% yield. Furthermore, the separation and purification process of 2,6-DMN present in the LCO fraction was reevaluated by using the experimental results obtained through each operations of SC, RC 1, and RC 2.

• Applied Chemistry for Engineering
• /
• v.32 no.1
• /
• pp.68-74
• /
• 2021

Gas diffusion layer (GDL) compression is important parameter of polymer electrolyte membrane fuel cell (PEMFC) performance to have an effect on contact resistance, reactants transfer to electrode, water content in membrane and electrode assembly (MEA). In this study, the effect of GDL compression on fuel cell performance was investigated for commercial products, JNT20-A3. Polarization curve and electrochemical impedance spectroscopy was performed at different relative humidity and compression ratio using electrode area of 25 ㎠ unit cell. The contact resistance was reduced to 8, 30 mΩ·㎠ and membrane hydration was increased as GDL compression increase from 18.6% to 38.1% at relative humidity of 100 and 25%, respectively. It was identified through ohmic resistance change at relative humidity conditions that as GDL compression increased, water back-diffusion from cathode and electrolyte membrane hydration was increased because GDL porosity was decreased.

• Composites Research
• /
• v.37 no.3
• /
• pp.190-196
• /
• 2024

The bipolar plate is a crucial element of the vanadium redox flow battery (VRFB) as it serves as both the electrical conduit and the structural support for the cell within the VRFB stack. Although, the graphite material is primarily used for the bipolar plate due to its excellent electrical conductivity, a significant limitation of performance of the VRFB is present due to high interfacial contact resistance (ICR) arises between the electrode and bipolar plate in the cell stack. This study aims to develop an integrated electrode-bipolar plate assembly that will address the limitations of the ICR. The integrated assembly was constructed using a single carbon felt with thermoplastic and thermoset polymers utilizing hot press method. Experimental results verify that the bipolar plate assembly exhibits reduced area specific resistance (ASR) due to the continuous electrical path. Additionally, from the charge/discharge cell test results, the integrated assembly shows improved cell performance. Therefore, the developed integrated electrode-bipolar plate assembly can serve as a substitute for the conventional bipolar plate and electrode assembly.

• Information and Communications Magazine
• /
• v.15 no.11
• /
• pp.124-142
• /
• 1998

ETSI BRAN (Broadband Radio Access Network)는 고속 무선 LAN 또는 고정 광대역 무선액세스 네트워크에서의 무선 접촉 계층과 ATM 및 IP(Internet Protocol) 코어 네트워크와의 연동을 위한 일부 기능을 표준화하기 위한 과제이다. 특히, BRAN의 HIPERLAN type-2(HIPERLAN/2)의 경우에는 과제의 범위는 무선 접속면, 무선 부시스템에서의 서비스 인터페이스, 서비스 구현에서 요구되는 연동 및 각종 지원 기능을 표준화하며, 무선 접속면의 경우에는 다수 벤더간의 상호 호환성을 제공할 수 있는 인터페이스를 구현하는 것이다. HIPERLAN/2의 기술 규격은 코어 네트워크와 독립적인 물리계층 및 데이터 링크 제어 (DATA Link Control: DLC) 계층과 서로 상이한 코어 네트워크와의 연동을 위한 네트워크 수렴 부계층을 다루게 될 것이며, 초기 단계에서는 ATM과 IP 코어 네트워크와의 연동 기능을 제시하게 될 것이다. 따라서 HIPERLAN/2기반의 시스템 규격을 제시하기 위해서는 네트워크 계층 및 기타 상위 계층에 대한 규격이 요규되며, 이는 ATM Forum에서의 무선 ATM 신호 방식 규격, IETF(Internet Engineering Task Force)의 IP규격, 그리고 ETSI의 SMG (Special Mobile Group) 프로젝트에서 표준화되고 있는 UMTS (Universal Mobile Telecommunication Service) 규격 등과 접목될 것이다. 결과적으로 무선 ATM 관점에서는 완전한 시스템 규격 작성은 ETSI BRAN과 ATM Forum에서 무선 접속 규격과 이동성 관리 및 신호 방식으로 각각 이원화되어 진행되고 있다. 현재 물리 계층에서의 전송 방식은 OFDM(Orthogonal Frequency Division Multiplexing)으로 확정되었으며, DLC 계층에서는 고정 길이의 TDD (Time Division Duplexing) TDMA 프레임 구조를 기반으로 AP (Access Point)에 의해 동적으로 상향 링크 자원을 예약 할당하는 매체 접근 제어 (Medium Access Control: MAC) 프로토콜이 고려되고 있다. 이와 같은 DLC 계층에서는 기본적으로 짧은 길이의 패킷을 통해 다양한 대역폭의 멀티미디어 트래픽을 효율적으로 수용하면서 ATM 네트워크뿐만 아니라 향후 IP 네트워크에서 요구하는 각 서비스별 QoS (Quality of Service)를 개별적으로 보장할 수 있는 기능을 구현하고자 한다. 향후 이 부문에 대한 표준화가 본격적으로 진행될 것으로 예상되며 HIPERLAN/2의 경우에는 1999년 중반까지 1차 기능 규격을 완료할 예정이며, BRAN 전반에 대한 완전한 규격을 2002년까지 완성하는 것을 목표로 하고 있다.

• Journal of Science and Technology Studies
• /
• v.10 no.2
• /
• pp.77-105
• /
• 2010

This essay aims to look into the possibility and limit of a technological fix with the PSD (platform screen door), which was proposed as the solution of subway risk problems. Subway risk problems may be classified into five categories-on-rail accidents, in-station accidents, platform accidents, spatial risks in underground, and risks due to a crime or terror-, and the platform accidents, which happens at the interface between the rail and the station, is the most serious and prominent. The PSD is considered as an effective technical means to prevent platform accidents. However, there remains a possibility of aggravating unexpected and invisible risks. When a fire breaks out in platforms, especially at exchange stations during the rush hour, the PSD can become a "wall of outcrying", since it may act as the "safety shutter" which killed many people in the 2003 Daegu subway disaster. This is why we need to look into the limit of a technological fix with the PSD.

• Membrane Journal
• /
• v.17 no.1
• /
• pp.44-53
• /
• 2007

The primary objective of this study is to increase the extent of water flux and fouling resistance of nano-filtration or reverse osmosis membranes. This study was performed to investigate the effect of surface characteristics of silane coated membranes on modified fouling index. Commercial polyamide composite RO membrane (RE1812-LP) and NF membrane (ESNA4040-LF) were treated with silane coupling agents in ethanol at five different concentrations. The silane coupling reagent, aminopropylmethoxydiethoxysilane, contains one aminoalkyl and three alkoxy groups. The hydrophilic effect of aminoalkyl group of APMDES on the permeability and fouling resistance of the modified membrane was examined. The surfaces of the modified membranes were characterized by FE-SEM, contact angle analyzer, and zeta potentiometer in order to confirm successful sol-gel methods. The modified NF membranes showed significantly enhanced water flux and fouling resistance without a decrease in salt rejection in divalent ionic feed solution.

• Korean Journal of Ichthyology
• /
• v.10 no.2
• /
• pp.241-249
• /
• 1998

Seasonal samples of demersal fish off Yongkwang were collected by an otter trawl from June 1986 to March 1987, and analyzed in terms of species composition and abundance. Of 33 species indentified, Johnius grypotus, Chaeturichthys stigmatias, Argyrosomus argentatus and Cynoglossus joyneri predominated in abundance, consisting 81.9% in the total number of species and 71.4% in biomass. The number of species and abundance were comparatively high in warmer months, and a resident species Cynoglossus joyneri and migrants such as Johnius grypotus and Argyrosomus argentatus were predominated. In cold months, the number of species and abundance were low, and Chaeturichthys stigmatias and Zoarces gillii were dominated. The relative abundance in major species of the present study shows a similar seasonal trend to that obtained in 1995. The relative abundance of major species occurred in the shallow coastal waters of southwestern Korea was highly correlated to the tidal velocity. J. grypotus and C. stigmatias declined in abundance while C. joyneri increased as the tidal velocity increased. This trend in abundance of the major fishes seems to be related to the form of body. The characteristics being flat of C. joyneri could be the major cause of sustaining in the water of high tidal mixing.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.279.1-279.1
• /
• 2014

글래스(glass), 폴리머 또는 쿼츠와 같은 투명기판은 렌즈, 디스플레이, 광검출기, 광센서, 발광다이오드 및 태양전지와 같은 광 및 광전소자 분야에서 널리 사용되고 있다. 이러한 소자들의 경우, 광추출 또는 광흡수 효율을 향상시키는 것이 매우 중요하다. 그러나 투명기판의 경우, 약 1.5의 굴절율로 인해 표면에서 4% 반사가 발생되는데, 이러한 광학적 손실은 소자의 성능을 저하시키는 원인이 된다. 따라서, 글래스와 공기 경계면에서 발생되는 광손실을 줄이기 위한 효율적인 무반사 코팅이 필요하다. 최근, 우수한 내구성 뿐만 아니라, 광대역 파장 및 다방향성에서 무반사 특성을 보이는 서브파장 주기를 갖는 나노구조(subwavelength structures)의 형성 및 제작 공정에 관한 연구가 보고되고 있다. 이러한 나노구조는 경사 굴절율 분포를 가지는 유효 매질을 형성하기 때문에 투명기판 표면에서의 Fresnel 반사로 인한 광손실을 줄일 수 있다. 또한, 무반사 서브파장구조를 형성하기 위한 패터닝 방법으로, 간단/저렴하고 대면적 제작이 용이한 열적 응집 공정을 이용한 자가정렬된 금속 나노입자 형성 기술이 널리 사용되고 있다. 따라서 본 실험에서는 열적 응집현상에 의해 형성된 비주기적 금 나노입자 식각 마스크 패턴 및 유도결합 플라즈마 장비를 이용하여 글래스 기판 위에 무반사 서브파장 나노구조를 제작하였다. 금 나노패턴 및 제작된 글래스 서브파장 나노구조의 식각 프로파일은 주사전자현미경을 사용하여 관찰하였으며, UV-Vis-NIR 스펙트로미터를 사용하여 빛의 투과율을 측정하였다. 또한, 제작된 샘플들에 대해서, 표면 접촉각 측정 장비를 이용하여 표면 wettability를 조사하였다.