Proceedings of the Korean Vacuum Society Conference
/
2000.02a
/
pp.79-79
/
2000
탄화규소는 그 전기적, 열적 기계적 안정성 때문에 새로운 반도체 재료로서 주목받고 있는 물질이다. 탄화규소를 이용하여 전자소자를 제조하기 위해서는 ohmic 접촉과 Schottky 접촉을 형성하는 전극물질의 개발이 선행되어야 하며, 고온, 고주파, 고출력용 반도체 소자를 제조하기 위해서는 전극의 고온 안정성 확보가 필수적이다. 따라서 탄화규소 소자의 응용범위는 전극에 의해서 제한된다고 할 수 있다. 일반적으로 전극을 증착한 후 원하는 접촉 특성을 얻기 위해서는 열처리 과정을 거쳐야 하며 접촉의 특성이 열처리에 의해 영향을 받는 것으로 알려져 있다. 따라서 본 연구에서는 열처리가 금속/탄화규소 접촉의 특성에 미치는 영향을 알아보고자 하였으며, 이를 바탕으로 우수한 Schottky 다이오드의 제작 가능성을 타진해보고자 하였다. 유기실리콘 화합물 원료인 TEMSM(bis-trimethysilylmethane)을 사용하여 실리콘 기판위에 단결정 $eta$-Sic 박막을 증착하였다. 기판의 영향을 줄이기 위하여 $\beta$-Sic 박막의 두께가 $1.5mu extrm{m}$ 이상인 시편을 사용하였다. 전극으로는 Pt를 사용하였으며, 전극 증착은 DC magnetron sputter를 이용하였다. 전기적인 특성을 분석하기 위하여 전류-전압, 커패시턴스-전압 특성을 분석하였고, XRD와 AES를 이용하여 계면에서의 반응을 알아보았다. Hall 측정 결과 모든 $\beta$-Sic 박막은 약 2$\times$1018cm-3 정도의 도핑 농도를 갖는 n형 탄화규소임을 확인하였다. Pt/$\beta$-Sic 접촉은 열처리 전에는 ohmic 접촉 특성을 보였으나 열처리 후에는 Schottky 접촉의 특성을 나타냈다. 전기적 특성 분석을 통하여 열처리 온도가 증가할수록 에너지 장벽의 높이가 증가하는 것을 알 수 있었다. 이상적인 Pt/$\beta$-Sic 접촉의 특성을 보이는 것은 전극 증착시 sputtering에 의하여 계면에 발생한 결함이 도너의 역할을 하여 에너지 장벽의 두께를 감소시켜 tunneling을 촉진하기 때문인 것으로 판단된다. 열처리 후 접촉 특성이 변화하는 것은 이러한 결함들의 소멸 때문으로 생각된다. AES 분석을 통하여 열처리시 Pt가 $\beta$-Sic 내부로 확산하는 것을 알 수 있었으며, 이 때 Pt가 $\beta$-Sic 와 반응하여 계면에 실리사이드가 형성됨으로써 Pt/$\beta$-Sic 계면이 보다 안정한 탄화규소 박막 내부로 이동하게 되고 계면의 결함 농도가 줄어드는 것이 접촉 특성 변화의 원인이라 할 수 있다. 열처리 온도가 증가함에 따라 계면이 점점 $\beta$-Sic 내부로 이동하여 결함농도가 낮아지기 때문에 tunneling 효과가 감소하여 에너지 장벽이 높아지게 된다. Pt를 ohmic 접촉과 Schottky 접촉 전극물질로 이용하여 제작한 Schottky 다이오드는 ohmic 접촉 형성시 Schottky 접촉에 발생하는 wputtering 손상에 의하여 좋은 정류특성을 얻지 못하였다. 따라서 chmic 접촉 전에 Schottky 접촉의 passivation이 필요한 것으로 판단된다.
Annual Conference on Human and Language Technology
/
1997.10a
/
pp.183-187
/
1997
세금계산서나 영수증등의 형식문서를 처리하기 위해서는 일반문서와는 달리 형식문서에서 인식의 대상이 되는 특정 셀에 대한 추출이 필요하다. 본 논문에서는 정형화된 형식문서에서 원하는 특정 셀의 내용만을 추출하는 방법을 제시하고자 한다. 제안된 방법은 지정된 셀을 이루고 있는 라인을 제거하는 것과, 라인제거시 손상된 문자를 복원하는 과정으로 나뉜다. 우선 라인들의 평균적인 두께를 구한 후 라인을 트레이스(trace)하면서 이 두께 범위내에 있는 라인은 지운다. 트레이스하는 과정에서 두께보다 큰 라인은 문자와 접촉된 것으로 판단하여 이 접촉된 좌표를 저장한 후 미리 정의된 접촉유형을 이용하여 문자의 복원 작업을 수행한다.
In order to analysis the degradation process of epoxy/glass fiber for outdoor condition, FRP laminate was exposed to high temperature and water. Then the degradation process was evaluated by comparing contact angle, surface potential decay, and surface resistivity. For the change of wettability, the contact angle of thermal-treated specimen with the high temperature of $200^{\circ}C$ increased. But that of water-treated specimen decreased. The characteristic of surface potential decay shows the tendency of the remarkable decrease on water-treated specimens, but increase on thermal-treated specimen compared with untreated one. Also, for the surface resistivity, it shows the same trend compared with the change of contact angle.
Kim, Seong-Tak;Park, Seong-Eun;Bae, Su-Hyeon;Kim, Chan-Seok;Kim, Yeong-Do;Tak, Seong-Ju;Kim, Dong-Hwan
Proceedings of the Materials Research Society of Korea Conference
/
2012.05a
/
pp.101.2-101.2
/
2012
스크린 프린팅 기술은 공정이 단순하고 값이 싸며 대량생산에 용이하기 때문에 결정질 실리콘 태양전지의 전극형성에 널리 사용되고 있다. 스크린 프린팅 기술을 이용한 전면 전극은 일반적으로 은 페이스트 (Ag paste)를 패시배이션 층이 증착 된 실리콘 기판 위에 인쇄를 한 후 고온의 소성 공정을 통하여 형성이 된다. 은 페이스트가 실리콘 에미터 층과 접촉하기 위해서는 패시배이션 층을 뚫고 접촉이 형성 되어야 한다. 이 과정에서 소성 후 은 전극과 실리콘 기판 사이의 계면에는 glass layer가 형성되어 접촉저항을 높이고 태양전지의 직렬 저항을 높이는 인자로 작용한다. 따라서 본 연구는 형성된 은 전극과 실리콘 사이의 계면 특성을 평가하고 glass layer의 두께와 접촉 저항 사이의 관계를 분석하기 위해서 진행되었다. 접촉저항은 trasnfer length method (TLM) 법을 이용하여 측정을 하였고 glass layer의 두께는 field emission scanning electron microscope(FE-SEM)을 이용하여 평가하였다. 또한 glass layer의 두께에 따른 전반적인 태양전지의 특성을 solar simulator, probe station, suns-Voc를 통하여 평가하였다. 결과적으로 glass layer의 두께에 따라서 접촉저항이나 직렬저항이 변화하는 것을 관찰 할 수 있었고 이를 정량적으로 분석하고자 하는 노력이 시도되었다. 이러한 변화는 또한 태양전지의 특성에 영향을 미치는 것을 확인할 수 있었다.
Proceedings of the Computational Structural Engineering Institute Conference
/
1992.10a
/
pp.90-96
/
1992
경계면 요소를 이용하여 철근콘크리트 구조물의 접촉면 문제를 유한 요소법으로 해석하는 기법에 대하여 연구한다. 본 연구에서는 경계면 요소의 수치해석의 이론과정을 전개하고, 실험 관찰된 부착 시험체에 적용하여 이형철근과 콘크리트 부착기구의 접촉면을 해석한다. 경계면은 특별한 연결요소를 이용하여 재현하며 Mohr-Coulomb의 마찰 이론을 응응한다. 해석의 주요점으로 하중상태에 따라 변화되는 경계면의 접촉상태, 즉 고정(stick), 미끄러짐(slide), 분리(separation)를 묘사하여 경계면 재료의 비선형 거동을 관찰한다. 부착모델의 해석결과는 실험실의 결과와 대체로 일치되며 따라서 철근콘크리트 접촉면의 응력해석을 위해 경계면 요소가 활용될 수 있음을 보여준다.
Park, Ju-Hwang;Park, Jong-Woo;Kim, Jong-Soo;Kim, Jang-Eok
Applied Biological Chemistry
/
v.45
no.3
/
pp.145-151
/
2002
Molinate, a thiolcarbamate herbicide widely used for control weeds in paddy soil, has been suspected for a possibile transportation into surface water due to its relatively high solubility in water. This study was performed to know that how much molinate could be removed during treatment processes for drinking water. The removal effciency of molinate in water was negligible in treatment process of polyaluminium chloride for coagulation. Molinate was gradually decreased up to 60.2% during contact time of 4 hours when chloride, an disinfectant used in water treatment system was treated. And in an hour treatment of ozone, molinate removal ranged $28.9%{\sim}58%$ However by treatment system of granular activated carbon, molinate was removed 93.9 to 100% at all concentrations used with a range of concentrations of granular activated carbon treated. The removal effciency of whole system simulated with removal efficiencies of molinate in each step of treatment processes was 99.5%. Therefore, if molinate happen to come into water treatment facilities, it could be removed effectively through the treatment processes.
Journal of the Korea Institute of Information Security & Cryptology
/
v.31
no.3
/
pp.291-307
/
2021
There has been global efforts to prevent the further spread of the COVID-19 and get society back to normal. 'Contact tracing' is a crucial way to detect the infected person. However the contact tracing makes another concern about the privacy violation of the personal data of infected people, released by governments. Therefore Google and Apple are announcing a joint effort to enable the use of Bluetooth technology to help governments and health agencies reduce the spread of the virus, with user privacy and security central to the design. However, in order to provide the improved tracing application, it is necessary to identify potential security threats and investigate vulnerabilities for systematically. In this paper, we provide security analysis of Privacy-Preserving COVID-19 Contact Tracing App with STRIDE and LINDDUN threat models. Based on the analysis, we propose to adopt a verifiable computation scheme, Zero-knowledge Succinctness Non-interactive Arguments of Knowledges (zkSNARKs) and Public Key Infrastructure (PKI) to ensure both data integrity and privacy protection in a more practical way.
Wheel/rail contact is a significant problem in railway dynamics. In this paper, the wheel/rail contact is examined analytically and numerically as a contact problem between two cylinders where torque and friction have effect. Furthermore, the contact of a real wheel and rail is investigated numerically where the normal and shear force act. This study demonstrates that the wheel/rail contact is a process that generates traction force through creep where rolling and sliding occurs simultaneously depending on the shape of the wheel and rail, and the friction coefficient between them.
This paper presents sealing contact stress and deformation behaviors of an elastomeric contact seal for a pipe connection. In this study, a pipe connection is used by a joint nut and an elastomeric contact seal with a sealing interference of 0.2~0.5mm. A sealing interference in which compresses an elastomeric contact seal is generated by fastening a joint nut between two pipes. The FEM computed results show that the contact normal stress of contact model 1 with an inclined sealing surface is 1.5~1.75 times high in compared with that of contact model 2 with a parallel sealing surface. This indicates that the sealing contact surface recommends a wedge contact mode between two pipe connections for a high sealing compression stress.
Proceedings of the Computational Structural Engineering Institute Conference
/
1992.10a
/
pp.3-3
/
1992
타이어 Curing공정은 공기압 타이어의 제조시 상당히 정교한 단계를 거쳐서 이루어지며, 이는 타이어 설계에 큰 영향을 줄 뿐만아니라, 타이어의 성능에도 관건이 있다. 본 연구에서는 유한요소법을 이용하여 타이어의 molding 공정을 분석하였다. 유한요소해석 프로그램인 MARC가 Cured 타이어 내부의 Curing Bladder 팽창과정해석에 이용되었다. 비압축성 요소로 Curing Bladder를 모형화하였으며, MARC의 접촉문제해석기법(contact option)을 이용하여 Cured 타이어 내부와 Curing Bladder 외부의 접촉부위를 Simulation하였다. 본 연구의 주요 관심내용으로서는 Curing Bladder의 형상변화에 따른 Curing Bladder의 팽창거동해석과, Cured타이어와 Curing Bladder의 접촉부위에서 얻을 수 있는 접촉압력의 비교.검토이다. 타이어 Curing시 타이어와 Bladder의 Contact과정을 해석하여, 아래와 같은 결과를 도출하였다. Bladder의 형상은 Cylinderical 형상 보다는 Toroidal 형태가 접촉압 분포의 균일성 및 크기 측면에 서 우수한 것으로 판단된다. Curing Bladder의 증심선 부위 보다 이에서 약간 떨어진 부위에서 최대 접촉압력이 발생되며, 이는 타이어 내면의 굴곡현상과 깊은 관련이 있윰 것으로 사료된다. 타이어 Bead부의 Carcass 자연평형현상이 유지된 제품을 얻기위해서는, Side-Bead구간의 접촉압력 증가가 필요하며, 이를 위하여는 Bladder 형상이 Cylinderical 보다는 Toroidal 형태가 유리하고, Bead부의 Gage Down, 전체직경의 증가 및 높이의 증가가 유리한 것으로 판단된다. 본 연구 결과를 이용하여, 타이어 Curing과정에서 발생되는 불량제품의 원인파악 및 타이어 설계자가 원하는 제품생산의 불가능한 원인을 파악하는데 도움을 줄 것이다.를 C의 structure와 pointer를 기반으로 하게끔 변경시키고 이에 따르는 제반 변경 사항을 수정 보완하여 프로그램의 분석을 용이하게 하며 기능의 변경 및 추가가 수월하게 하였고 메모리를 동적으로 관리할 수 있게 하였다. 또한 기존의 smpl에 디버깅용 함수 및 설비(facility) 제어용 함수를 추가하여 시뮬레이션 프로그램 작성을 용이하게 하였다. 예를 들면 who_server(), who_queue(), pop_Q(), push_Q(), pop_server(), push_server(), we(), wf(), printfct() 같은 함수들이다. 또한 동시에 발생되는 사건들의 순서를 조종하기 위해, 동시에 발생할 수 있는 각각의 사건에 우선순위를 두어 이 우선 순위에 의하여 사건 리스트(event list)에서 자동적으로 사건들의 순서가 결정되도록 확장하였으며, 설비 제어방식에 있어서도 FIFO, LIFO, 우선 순위 방식등을 선택할 수 있도록 확장하였다. SIMPLE는 자료구조 및 프로그램이 공개되어 있으므로 프로그래머가 원하는 기능을 쉽게 추가할 수 있는 장점도 있다. 아울러 SMPLE에서 새로이 추가된 자료구조와 함수 및 설비제어 방식등을 활용하여 실제 중형급 시스템에 대한 시뮬레이션 구현과 시스템 분석의 예를 보인다._3$", chain segment, with the activation energy of carriers from the shallow trap with 0.4[eV], in he amorphous regions.의 증발산율은 우기의 기상자료를 이용하여 구한 결과 0.05 - 0.10 mm/hr 의 범위로서 이로 인한 강우손실량은 큰 의미가 없음을 알았다.재발이 나타난 3례의 환자를 제외한 9례 (75%)에서는 현재까지 재발소견을 보이지 않고 있다. 이러한 결과는 다른 보고자들과 유사한 결과를 보이고 있지만 아직까지 증례가 많지 않기 때문에 생존율을 얻
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.