• Magazine of the Korea Concrete Institute
• /
• v.6 no.3
• /
• pp.142-151
• /
• 1994

Though stiffnesses of joints in precast concrete(P.C.) large panel structures are known to be generally less than those in monolithic reinforced concrete wall structures, designers have very little information on the quantitative values with regards to these stiffnesses. The aim of this paper is to provide this quantitative information, in particular, on the compressive stiffness of horizontal joints, based on the analytical results derived from several experiments. Also, it is shown that the approach from the contact problem to determine this stiffness gives a value very simlar to those obtained above.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.2
• /
• pp.55-59
• /
• 2012

This study performs the bending and contact stress analyses for a pair of mating gears during rotation. The interested gears are used for a railway reducer. In general, the railway reducer needs high speed rotation, which leads to a large gear ratio. Thus, it is not easy to apply finite element method to investigate the strength performance, since the size of a gear is much larger than that of a pinion. In this study, the bending and contact stresses determined from FEM are compared with the values determined from the ISO code.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1999.11a
• /
• pp.103-113
• /
• 1999

Point contact film thickness in elastohydrodynamic lubrication (EHL) is analyzed by the image processing method for the monochromatic incident light. Interference between the reflected lights both on Cr coating of glass disk and on super finished ball makes circular fringes, which are regarded as film thickness together with numbering of fringe order. In this study, we developed technology to measure the film thickness by analyzing dark and bright intensity waves which results from monochrome green light. Two typical fringe patterns only with intensity values 3re examined for the measurement of point contact EHL film thickness. We expect that this technology will give valuable clue to improve color image processing analysis for high resolution of EHL film thickness with white incident light.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.16 no.6
• /
• pp.97-103
• /
• 2008

In general, the strength of gears is calculated using the formula of AGMA or JGMA. But these formula can not be applied directly to the strength calculation of the rack and pinion of steering gear assay, because of complex tooth and contact shapes. So Lewis bending stress and Hertzian contact stress formula are generally used for the design of rack and pinion of steering gear assay. But these formula do not also give the exact stress of rack and pinion. In this paper, comparing the finite element analysis results and the experimentally measured values, it is shown that the finite element modeling technique of the rack and pinion of steering assay is reasonable.

• The Optical Journal
• /
• s.125
• /
• pp.28-31
• /
• 2010

지구 온난화 혹은 에너지 고갈 문제에 대응하기 위하여 새로운 소재에 대한 요구가 증가하고 있다. 또한 국내 제조업의 국제적인 경쟁력을 확보하기 위하여 고강도강, 비철재료 등 고기능 소재의 산업 적용이 증가하고 있다. 종래의 철강소재에 비해 새로운 소재들은 가공이 까다로울 뿐만아니라 상대적으로 높은 정밀도를 필요로 한다. 레이저는 높은 에너지 강도를 갖는 일종의 빛이며, 비접촉으로 재료를 가공하는 것이 가능하다. 또한 동일한 장치를 이용하여 용접, 절단 열처리 등 대부분의 재료 가공이 가능하며 기존의 가공 방법에 비하여 가공속도가 빠를 뿐만 아니라 가공품질이 우수한 장점이 있기 때문에 산업 적용이 급격히 증가하고 있는 기술이다. 레이저를 이용하여 재료를 가공하는 방법에는 MEMS 등의 초미세 가공으로부터 조전용 후판에 이르기까지 다양하지만 본 보고에서는 출력 1kW 이상의 레이저를 이용한 금속의 용접 및 절단 가공에 대해서 서술하였다. 금속의 가공에 이용 가능한 출력 1kW 이상의 레이저는 $CO_2$ 레이저, YAG 레이저, Diode 레이저 등이 있다.

• The Korean Journal of Zoology
• /
• v.37 no.2
• /
• pp.144-155
• /
• 1994

마이크로파 에너지로서 현미경 관찰을 위한 생체물질을 고정할 때, 고정효과는 화학 고정액을 사용할 때와 비교하여 보다 우수한 또는 적어도 동일한 고정효과를 볼 수 있다는 것은 알려진 사실이다. 그러나 기존의 마이크로파 오븐을 사용하여 생체물질을 고정하면 고정 정도에 일정성이 없는데, 이는 마이크로파가 균일하게 조사되지 않고 고정에 적절하도록 마이크로팍의 강도를 조절하기 어려우며, 이로 인하여 정확한 고정온도의 측정이 불가능하기 때문으로 생각된다. 이 연구에서는 마이크로파가 조사되는 동안 시료의 온도를 측정할 수 없는 기존의 마이크연.파 오븐의 단점을 보완하기 위하여 비접촉식 적외선 온도 감응기를 장착한 마이크로파 오븐을 개발하였으며 고정효과를 관찰하기 위하여는 포유류의 기준 조직으로 알려진 생쥐의 신장을 고정하였다 고정효과는 전체적인 구조와 세부 구조의 보존이 모두 우수하였고 최적의 고정온도는 28$\pm$1$^{\circ}C$(완충용액 20 ml, 10초) 이었다. 이와같이 고정된 재료는 고정효과 뿐만 아니라 염색성이 좋아서 조직화학 반응이 우수하고, 냉동절편법과 연계했을 때 전체 절편제작 과정이 2~4시간 내에 완료될 수 있었다 이때 절편의 질(질)은 화학 고정액이나 냉동절편 법에 의하여 제작된 것 보다 우수하였다.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.05a
• /
• pp.99-100
• /
• 2019

Water repellent and waterproofing agents fail to act work properly if cracks or detachment occurs outside. The method of making mortar was tested by classifying it into two methods: direct water-repellent put in concrete and water-repellent spray to sand method. It was found that the compressive strength was decreased as the amount of water repellent was increased. As a result of measuring the contact angle, all of the specimens were hydrophobic. The spray method showed greater water repellent effect than the direct mixing method.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.10 no.6
• /
• pp.95-101
• /
• 2001

This work is concerned with construction of the intelligence stress predictor far compression strength evaluation using neural network-ultrasonic waves. The contact pressure in jointed plates was measured by using ultrasonic technique. Neural network is used to evaluate and predict contact pressure from the results of the calibration curves. The organized neural system was leaned with the accuracy of 99%, as a result of learning the ultrasonic echo ratio to the contact pressure measurement between SM45C and STS410 materials. And it could be evaluated and predicted with the accuracy of 90% in the evaluation of ultrasonic echo ratio difference in the same surface roughness and contact pressure, and 85% in the prediction of virtual ultrasonic echo ratio. Thus the proposed stress predictor is very useful for the evaluation and prediction of the contact pressure between SM45C and STS410 materials.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.17 no.2
• /
• pp.23-29
• /
• 2008

This study analyzes the rolled circular rod strip with radius of loom and length of 350cm by using finite element analysis. The material strength and its durability of the rolled strip can be predicted through this study. As the penetration tolerance by contact decreases, the contact rigidity of strip increases. As the contact rigidity becomes the highest at the elapsed time of 1.2 second, the contact stress becomes the lowest. On the contrary, von-Mises stress becomes highest at this time. The total deformation on strip increases from the upper part of strip at the position near to rotating roll to the lower part of strip at the position near to fixing roll.

• Proceedings of the KIEE Conference
• /
• 2003.07b
• /
• pp.861-863
• /
• 2003

In this paper, a controller for a non-contact bearing-based motor-generator system is designed. The levitation control method is a digital PID control. The plant dynamics consisting of actuator and rigid rotor dynamics are described. And some experiments are conducted with each global control and local control concept. From the whirl test, the Motor-Generator System can be controlled within about ${\pm}10{\mu}m$ gap variation at the rotational speed of 600rpm and generate electric power of AC100V.