Cu/EMC 계면 접착력에 미치는 산화의 규명하기 위해 리드프레임의 저온 산화에 대하여 조사하였다. 이전의 보고와 달리, 저온에서도 Cu$_{2}$O위에 CuO산화물이 형성되어 Cu/Cu$_{2}$O(NiO)/Cu(NiO)/air의 산화층 구조를 나타내었다. Cu/EMC 계면 접착력은 산화가 진행됨에 따라 산화 초기에 급격히 증가하다 최대값에 이르고, 이후의 계속적인 산화로 감소하는 양상을 보였다. 접착력은 산화 온도나 리드프레임의 종류보다 산화막의 두께에 밀접한 상관 관계를 나타내었다. 최대 계면 접착력이 얻어지는 산화막의 두께는 리드프레임의 종류보다 산화막의 두께에 밀접한 상관 관계를 나타내었다. 최대 계면 접착력이 얻어지는 산화막의 두께는 리드프레임의 종류와 무관하게 대략 20nm 와 30nm 사이에 존재하였다. 산화 초기의 접착력 증가는 산화로 인한 EMC에 대한 젖음성의 증가와 기계적 고착 효과의 증가에 기인하였다. 리드프레임과 EMC의 파괴 표면에 대한 AES, XPS 분석으로 부터, 산화막의 두께가 얇을 때에는 Cu$_{2}$O//CuO의 계면 파괴 + EMC 자체 파괴가 복합적으로 발생함을 알 수 있었다. 반면에 과도한 산화로 낮을 접착력을 나타내는 시편은 Cu/Cu$_{2}$/O 계면의 파괴를 나타냈다.
Park, Sungjun;Song, Jongkwon;Park, Euiyong;Rho, Taeho;Choi, Sunghan
Journal of the Korean Society of Propulsion Engineers
/
v.23
no.4
/
pp.92-97
/
2019
A study was conducted to improve the adhesion of propellant, liner,and insulation. Insulation was shown to be more advantageous in improving the adhesion when a barrier coat was applied compared to a bare insulation layer. It was confirmed that the adhesion strength between the insulation and the propellant improves as the thickness of the liner coating increases. The liner was cured for 24 h. If the liner is cured for a long time, it will adversely affect adhesion. Adhesion is also improved when a bonding agent is applied. As the bonding agent content increases, the adhesion improves. There is a change in the adhesive strength depending on the type of bonding agent used. HX-868 shows slightly more improved adhesion than HX-752.
강유전체 재료의 하부전극으로 사용되고 있는 Pt/Ti 박막의 접착력에 대한 열처리 분위기의 영향을 연구하였다. 시편의 접착력은 90$^{\circ}$ 필 테스트 방법을 사용하여 정량적으로 측정하였다. 열처리 후 사용된 분이기에 관계없이 모두 접착력이 감소하였는데 특히 산소분위기에서 열처리 한 시편의 접착력이 매우 크게 감소하였다. AES depth profile과 단면 TEM을 이용하여 계면반응을 관찰한 결과 산소열처리시에는 Ti가 외부에서 확산해 온 산소와 반응하여 rutile TiO2상이 형성됨을 알 수 있었다. 그러므로 산소열처리 후에 일어나는 접착력의 급격한 감소 원인은 열처리시 취약한 TiO2상이 형성되며 이로 인해 Ti 접착층이 고갈되기 때문임을 알 수 있었다.
Journal of the Microelectronics and Packaging Society
/
v.1
no.1
/
pp.33-40
/
1994
금속박막 증착 전 Ar 이온을 이용한 폴리이미드 표면의 RF 스퍼터링 처리가 Cr/폴 리이미드 계면의 접착력과 반응성에 미치는 영향에 대하여 90。 peel test, TEM, FTIR 및 XPS를 사용하여 연구하였다. Cr/폴리이미드 계면의 접착력은 촐리이미드 표면은 RF 스퍼 터링 처리에 의해 1g/mm에서 100g/mm로 현저히 증가하였다. 표면 비저항 측정과 FTIR 및 XPS 분석결과 RF 스퍼터링 처리에 의한 Cr/폴리이미드 계면의 접착력 증가는 RF 스퍼 터링에 의한 폴리이미드 표면의 chemical modification 에 의해 증착되는 Cr과 계면 반응성 이 향상되는데 기인하는 것임을 밝혔다.
Surface treatment was carried out by an Excimer Pulse laser beam in order to increase the adhesive strength of vulcanized rubber. With increasing number of laser beam irradiations, the adhesive strength was greatly increased; the adhesive strength was 1,500 N/m after irradiation 100 times. The energy density increase was in direct proportion to the adhesive strength increase; the maximum value of the adhesive strength was 1,500 N/m at the energy density of 176 mJ/$cm^{2}$. It was concluded that the increase of surface area was relevant to that of both energy density and adhesive strength
본 연구에서는 플라즈마 화학 증착법으로 기판에 따른 DLC 박막의 접착력 변화를 조사하였다. 박막의 분리가 발생하기 시작하는 경우의 두께를 임계두께로 정하여 스크래치 테스터로 측정된 임계하중과 더불어 박막의 잡착강도값으로 사용하였다. 다이아몬드상 탄소박막은 실리콘 기판에서 가장 우수한 접착력을 가지는 것으로 나타났으며, 크롬>티타늄>철>세라믹 기판의 순으로 접착력이 감소하였다. XPS, AES 분석을 사용하여 계면에서 결합구조와 결합형태 등을 관찰하여 접착력과의 관계를 조사하였다. 그 결과 다이아몬드상 탄소박막의 접착강도는 막/기판의 계면에서의 탄화물 형성에 영향을 받으며, 계면에서의 초기산화물층에 큰 영향을 받는것을 확인하였다.
본 연구에서는 비스페놀 A, 에피크로로히트린을 반응시킨 에폭시 기본주제를 중심으로 경화제, 희석제, 충진제, 촉매 등을 배합하여 토목, 건축용 반고체형 에폭시 접착제를 개발하였다. 여기서 특히 에폭시 주제와 희석제의 종류 및 배합비율에 따른 기본 물성, 접착성능 등을 측정하였다. 상온 경화 특성을 측정하기 위하여 경화시 간을 측정한 결과 희석제의 종류와 관계없이 희석제의 양이 증가할수록 경화시간이 증가하고 경화온도도 증가하는 경향을 알 수 있었으며 촉매의 양이 적을 경우가 경화시간이 빠른 것을 알 수 있었다. 또한 경화 시간은 30분 내지 40분 정도로 상온에서 사용할 수 있을 것으로 기대한다. 접착력 시험 결과는 촉매의 양이 적당한 때 가장 좋은 접착력을 나타내고 희석제 중에서 HDGE의 경우가 가장 좋은 접착력을 나타내었고 희식제의 양이 증가할수록 접착력은 증가하였다. 실리카와 철분을 섞어 반고체형 에폭시 접착제를 제조한 경우 기존의 제품보다 우수한 접착력을 나타내었다. 따라서 본 연구에서 개발한 반고체형 접착제는 제조공정 코스트 등에 대한 검토와 함께 제품화하여 토목, 건축 분야의 콘크리트 균열 접착, 볼트와 콘크리트의 접합, 목재의 접합 등에 간편하게 사용될 수 있으며, 배합물질과 비율에 따라 전기전자. 토목건축, 자동차산업 등의 산업용 접착제로서 응용될 수 있을 것으로 기대된다.
Kim, R.K.;Sohn, B.Y.;Han, M.H.;Kang, H.M.;Yoon, T.H.
Elastomers and Composites
/
v.34
no.2
/
pp.128-134
/
1999
Steel tire cords were coated via RF plasma polymerization of acetylene and butadiene gas in order to enhance adhesion to rubber compounds. Adhesion of tire cords was measured by TCAT and T-test as a function of type of gas, plasma powder, treatment time, gas pressure and Ar gas etching. Some samples were subjected to aging study in distilled water at $80^{\circ}C$ for a period of 7 days. After testing, tire cords were analysed by SEM to elucidate the adhesion mechanism. The highest adhesion values were obtained at 20W, 2min and 25mtorr for acetylene plasma polymerization, and l0W, 4min, 25mtorr for butadiene plasma polymerization. However, Ar plasma etching did not affect adhesion, while the adhesion of tire cords increased rather than decreased, contrary to expectations. It was not possible to elucidate failure mode by SEM, owing to the rough surface of the tire and the thin plasma polymer coating layer.
Proceedings of the Korean Society of Propulsion Engineers Conference
/
2005.11a
/
pp.413-416
/
2005
The study has been performed on the improvement of bonding process and bond strength of HTPB propellant and liner using a polymeric curative. In case of liner using polymeric curative prepared from reaction of HTPB and TDI, migration of curative was decreased at bond interface. So EPDM insulation sanding and Desmodur RE coating process could be omitted in motor case preparation and bond strengths between the HTPB propellant and liner were increased. Also deterioration phenomena of bond strength could not be observed in accelerated aging test.
패키징 재료로 유연성이 뛰어난 polydimethyl-siloxane (PDMS)를 사용하면 다양한 flexible packaging에 응용할 수 있다. 본 논문에서는 $O_2$ plasma를 이용한 PDMS의 표면 처리를 통해 PDMS의 표면에너지를 증가시키고, silicon과 PDMS 사이의 접착력 향상을 확인하였다. $O_2$ plasma power와 처리 시간에 따른 PDMS 표면의 접촉각을 측정하고 표면에너지를 산출하였는데, PDMS의 표면에너지는 $O_2$ plasma power에는 크게 영향을 받지 않고, plasma 처리 시간에 민감한 것으로 나타났다. Silicon-PDMS의 접착력 역시 plasma power에는 거의 영향을 받지 않았지만 plasma 처리 시간이 길어질수록 접착력이 커지는 것으로 확인되었는데 50W의 power로 25초 동안 처리한 조건에서 최대 130kPa의 압력까지 견디는 것으로 확인되었다. 이는 $O_2$ plasma 처리 시간이 길어짐에 따라 PDMS의 표면에너지가 커지고 이것이 silicon-PDMS의 접착력을 증가시키는 것을 나타낸다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.