• Journal of Satellite, Information and Communications
• /
• v.1 no.2
• /
• pp.38-44
• /
• 2006

The COMS(Communication, Ocean & Meteorological Satellite) is the geostationary satellite which will be performing three main objectives such as meteorological service, ocean monitoring and Ka-band satellite communications. In order to accomplish these missions, the COMS system needs to implement a specific electrical/mechanical interface functions which are requested by each payload units. This paper describes a on-board interface hardware design for COMS Meteorological Imager(MI). The Meteorological Imager Interface Unit(MI2U) achieves, through MIL-STD-15533 system bus, the interface between the Spacecraft Computer Unit(SCU) and the instrument which is dedicated to MI. MI2U provides a necessary power input to MI from +50V Power Supply Regulator(PSR), and allows adaptation of the specific payload interfaces and protocol to COMS spacecraft.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.5
• /
• pp.321-334
• /
• 2003

Globally-Asynchronous Locally-Synchronous (GALS) systems are worthy of notice as an adequate architecture for a large scaled chip design with guaranteeing easy designs and functional confidence. In this paper, we suggest an advanced structure of the interface unit which is indispensable for GALS systems by using stoppable clocks. The proposed interface unit is composed of a sender module and a receiver module. The sender module can carry out data transmission partially without the relation to an internal clock. We have designed it with 0.25${\mu}{\textrm}{m}$ standard cell library at the gate level and simulated its operation to show performance improvement. Finally, we constructed all example circuit with the interface unit and proved the correct operation of it.

• Proceedings of the KIEE Conference
• /
• 2004.10a
• /
• pp.34-36
• /
• 2004

Cable 접속장치인 정격 25.8kV 600/1200A Plug-in socket의 절연설계, 전계분포해석 및 열계해석을 위하여 전자계 및 열해석 프로그램인 Flux2D를 이용하여 simulation하였다. Plug-in접속장치의 shield형상을 변화하면서 각종 금구류 및 접속장치의 절연물의 연면전계강도를 계산하여 기준전계와 비교 검토하여 전계해석 하였다. 해석결과 shield 의 위치와 형상의 변화에 따라 socket내부의 전계강도를 완화시키는 중요한 역할을 하고 있음을 보여주고 있다. 열해석은 도체저항의 Joule 열원으로 입력하였으며, 정상상태에서의 은도 분포는 설계에 영향을 주지 않는 것으로 분석되었다.

• The Transactions of the Korea Information Processing Society
• /
• v.1 no.2
• /
• pp.263-271
• /
• 1994

Automation of production in modern manufacturing is based on the integration of the various stage of production process by means of processing system. Information processing and network interface are of fundamental importance in programmable device in industrial automation, as they essential in order to active integration in production lines. In this paper, TBC(token bus controller) in the Mini-MAP board performs the function of the MAC sublayer, The LLC sublayer is implemented according to the specification of Class 3 that includes Type 1 and 3. And the MMS services are designed within the scope of implementation MAP 3.0 All the softwares are implemented under the real time executive for real time application of the Mini-MAP and they are loaded into PROMs at the network board. We tested the LLC functions to make use of a protocol analyzer for the token bus protocol. Also the MMS conformance test was carried out by exchanging primitives between a model system(including NIU) and a MMS product that had already passed the conformance the conformance test based on measurement method of network analysis.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.8
• /
• pp.2106-2119
• /
• 1997

NDAS(Network Data Access System) is a system that interconnects high speed network(B-ISDN) and Local Area Network(Ethernet, FDDI). Nowadays, the request of multimedia data increases rapidly, so NDAS system must accept and process that request efficiently. Comparing with normal data traffic characteristics, multimedia data traffic characteristics are much complex, so it is necessary to implement the system that can cover such factor. In this paper, we suggest a NDAS hardware system model and also we propose a proper buffer size of NDAS system through the simulation. For measuring the proper buffer size of NDAS, we assumed two different simulation models, one is the case of using only one buffer and the other is the case of using two different buffers for Ethernet and FDDI, respectively. After comparing and analyzing simulation results, we suggest the proper NDAS system buffer size.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2005.11a
• /
• pp.537-540
• /
• 2005

휴대성을 가장 큰 장점으로 제공하는 모바일 장치는 모바일 장치를 위한 다양한 컨텐츠의 개발로 인해 관심이 주목되고 있다. 이러한 컨텐츠의 형식으로는 StandAlone 방식과 Network 방식이 있으며 근래에는 대부분의 컨텐츠들이 서버와의 통신을 통해 진행되는 후자를 따르고 있다. Network 방식의 컨텐츠는 서버와의 통신이 필수이기 때문에 별도의 서버와 함께 에이전트를 구현해야 한다. 모바일 장치에 탑재된 다양한 가상 기계와 수많은 컨텐츠들은 각각의 에이전트를 필요로 하며, 서버의 에이전트가 증가함에 따라 에이전트를 별도로 관리해야 하는 등의 문제점들이 발생하기 시작하였다. 본 논문에서는 이러한 문제점들을 해결하기 위한 방안으로서 통합된 형태의 에이전시를 제안하고자 한다. 제안된 에이전시는 모바일 장치의 가상기계와 컨텐츠의 종류에 상관없이 단 하나의 에이전시를 통해 상호간의 통신이 가능하다. 뿐만 아니라 서로 다른 모바일 장치와의 상호운용도 가능한 장점을 지닌다. 통합 에이전시는 접속 모듈과 함수 호출 모듈로 구성된다. 접속 모듈은 모바일 장치로부터 전송되는 전송정보 가운데 필요한 정보들을 추출하는 역할을 담당하며, 함수 호출 모듈은 접속 모듈에서 추출한 정보들을 이용하여 모바일 장치가 호출한 서버의 함수를 호출하는 역할을 담당한다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.15 no.9
• /
• pp.715-721
• /
• 1990

This paper describes the development of a Facsimile Interface Unit(FIU), which performs message switching between a DTE(Data Terminal Equipment), such as PC, TTY, and Telex, subscribed to PSPDN's message handing system, and a Group 3 facsimile terminal connected to Public Switched Telephone Network.

• Proceedings of the KIEE Conference
• /
• 1998.07g
• /
• pp.2377-2380
• /
• 1998

본 논문에서는 원자력 발전소의 제어 통신망을 위해 설계된 통신망 접속장치의 특징을 살펴보고 그에 적합한 통신망 관리의 구조와 서비스를 제안한다. 제안된 통신망 관리는 통신망의 초기화, 파라미터의 조정, 그리고 오류 처리를 담당한다. 제안된 통신망 관리는 물리 매체의 이중화, 통신망 접속장치의 이중화 그리고 시스템 이중화 등을 고려하여 설계되었다.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.36C no.7
• /
• pp.17-26
• /
• 1999

In this paper, Bit selectable and Bi-directional Interface Device is described, which can communicate data with the peripheral devices. Specially, an algorithm of truth-table comparison that synthesizes the pulse-type sequential circuit pulse has been proposed to design the Interrupt Generator, and implemented in designing the Interrupt Register. Also, a description of the asynchronous design method is given to remove the clock skew phenomenon, and the output asynchronous control method which finds the optimal clock and controls all the enable signal of the output pins at the same time is presented. Using this technique interface ports have delay time of less-than 0.7ns.

• JOURNAL OF ELECTRICAL WORLD
• /
• s.419
• /
• pp.28-35
• /
• 2011