• Journal of Adhesion and Interface
• /
• v.10 no.1
• /
• pp.1-10
• /
• 2009

The waterborne acrylic pressure-sensitive adhesive in the basis of butylacylate (BA) and 2-Ethylhexylacrylate (2-EHA) was synthesized and the methyl methacrylate (MMA) have been used to give the rigidity perfroamce. The polymreric latex was synthesized using butyl acrylate (BA), 2-ethylhexyl acrylate (EHA), methyl methacrylate (MMA) and each 1, 2, 3% of various functional monomers. The dimethyl-2-imidazlidon acrylate and 2-acrylamido-2-methyl-1-propanesulfonate was used in order to increase the wetting properties of acrylic emulsion. To study of properties of functional monomer, The polymreric latex was synthesized various functional monomers each 1, 2, 3%. The 2-acrylamido-2-methyl-1-propanesulfonate showed the best properties. Latex with acrylic acid and dimethyl-2-imidazlidon acrylate had good peel strength, holding power, but it showed that they didn't separate from adhered cleanly by weak cohesion strength. The adhesion performance was increased by increasing amount of 2-acrylamido-2-methyl-1-propanesulfonate however latexes with upper 7% 2-acrylamido-2-methyl-1-propanesulfonate showed that the properties of PSA decreased.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.5
• /
• pp.749-754
• /
• 2022

High adhesion and water resistance of the skin surface are required for wearable and skin-attachable electronic patches in various medical applications. In this study, we report a stretchable electronic patch that mimics the drainable structure pattern of the hexagonal channels of frog's pads and the sucker of an octopus based on carbon-based conductive polymer composite materials. The hexagonal channel structure that mimics the pads of frogs drains water and improves adhesion through crack arresting effect, and the suction structure that mimics an octopus sucker shows high adhesion on wet surfaces. In addition, the high-adhesive electronic patch has excellent adhesion to various surfaces such as silicone wafer (max. 4.06 N/cm²) and skin replica surface (max. 1.84 N/cm²) in dry and wet conditions. The high skin-adhesive electronic patch made of a polymer composite material based on a polymer matrix and carbon particles can reliably detect electrocardiogram (ECG) in dry and humid environments. The proposed electronic patch presents potential applications for wearable and skin-attachable electronic devices for detecting various biosignals.

• Proceedings of the Korean Society for Food Science of Animal Resources Conference
• /
• 2004.10a
• /
• pp.178-182
• /
• 2004

본 연구는 사료 내 라이신 수준과 성별이 재래흑돼지육의 냉장기간동안 육질에 미치는 영향을 구명하고자 실시하였다. pH는 저장 5일까지 감소하였으나 7일째에 증가하였다. 그리고 high 처리구에서 가장 높게 나타났으며, high, medium 처리구의 거세돈과 low 처리구의 미경산돈에서 높게 나타났다. 드립감량과 가열감량은 저장기간동안 감소하였으나 라이신 수준과 성별에 따른 차이를 나타내지 않았다. 라이신 수준이 낮을수록 적색도와 황색도 모두 높게 나타났으나 성별에 따른 차이는 나타나지 않았다. 경도와 점착성은 감소했고, 거세돈육의 경도와 점착성이 미경산돈육보다 낮았지만 라이신 수준에 따른 차이는 없었다.

• Water for future
• /
• v.23 no.1
• /
• pp.119-127
• /
• 1990

The concentration of cohesive suspended sediment is determined by the circulation of water and the material dispersion. The equations of the two-dimensional, depth-integrated dispersive transport are the Reynolds equation, continuity equation, and advection-dispersion equation based on the Fick's law. A finite difference method has been applied to two models of circulation and dispersion transport. The circulation model is solved by the explicit scheme and the dispersion transport model is solved by multi-operational scheme. It is investigated wheter advective terms are included when the equation of circulation is applied to the model. For advection-dispersion equation, it was also investigated about variations of suspended sediment concentration with respect to the critical shear stresses.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.722-726
• /
• 2012

각 해역의 부유 플록은 그 해역의 조건에 따라 각기 다르게 형성된 플록이므로, 부유 플록 자체의 특성(결합강도, 밀도 및 크기 등)은 현장특성에 따라 현저하게 다른 "site-specific"한 특성을 가질 뿐만 아니라, 동일 해역이라 하더라도, 조류 등에 의한 유속변화에 따른 흐름전단응력의 증감에 따라 플록의 특성 또한 시간적으로 크게 변화할 수 있다. 이에 현장의 플록 특성이 반영된 부유플록의 침강속도를 산정하기 위해 입도 측정원리중 하나인 BW방법을 응용한 전북대 Owentube를 자체 제작하여 연구가 수행되었으며, 본 연구를 통하여 도출된 현장에서의 점착성 부유 플록의 침강속도 산정 결과는 향후 퇴적물 이송 및 수질 예측을 위한 수치모형 적용시에 필수적으로 요구되는 침강 및 퇴적특성 입력자료로 유용하게 사용될 수 있을 것이다.

• Korean Journal of Food Science and Technology
• /
• v.18 no.4
• /
• pp.325-328
• /
• 1986

Packsulkis (Korean traditional rice cake) were prepared by addition of sucrose, fructose, sorbitol, aspartame or saccharin to rice flour and were investigated for sensory and textural properties. The sensory characteristics of packsulkis containing various sweetening agents were significantly different among the sweetners used except in ease of swailowing and bitterness. Expecially packsulki prepared with sorbitol showed the greatest hardness, moistness and gumminess among the groups. The results of textural properties measured by Instron similar trend of sensory evaluation.

• Journal of Korea Water Resources Association
• /
• v.47 no.8
• /
• pp.703-715
• /
• 2014

This study aims to investigating the effect of Schmidt number (${\sigma}_c$) on sediment suspension and hydrodynamics calculation. The range of ${\sigma}_c$ is also studied based on the flux Richardson number ($Ri_f$) and gradient Richardson number ($Ri_g$). Numerical experiments are carried out by 1 dimensional vertical model. Both cohesive and non-cohesive sediments are tested under the conditions of pure current and oscillatory flow. The turbulence damping effect due to sediment suspension is examined considering ${\sigma}_c$ as a constant for the damping effect. The results of this study show the consistent effect of ${\sigma}_c$ on sediment suspension regardless of hydrodynamic condition. It is also found that the model overestimates the flow velocity and turbulent kinetic energy when the damping effect is not considered. Under the conditions of $Ri_f$ and $Ri_g$ causing density stratification, it is known that the vertical mixing of sediment is reasonably calculated in the range of ${\sigma}_c$ from 0.3 to 0.5.

• Polymer(Korea)
• /
• v.24 no.4
• /
• pp.513-519
• /
• 2000

The effect of petroleum resin as a tackifier for polyalphaolefin (APAO) hot melt adhesive on thermal properties, crystallinity and adhesion strength was investigated. The presence of petroleum resin resulted in the melting temperature decrease in APAO/petroleum blend, especially, in APAO with low ethylene content/C$_{5}$ petroleum blend. It was also found that petroleum resin caused the decrease of crystallinity regardless of ethylene content in APAO. The maximum adhesion strength was found to be at 50/50 (APAO/petroleum) composition. $C_{5}$ resin was more effective to increase adhesion strength than $C_{9}$ for APAO with high ethylene content. In addition, it was found that the adhesion strength was improved with the decrease of crystallinity in APAO/petroleum resin hot melts.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.25 no.6
• /
• pp.405-411
• /
• 2013

A sediment transport calculation considering cohesive force is proposed to deal with the transport phenomena of cohesive sediment. In the proposed calculation, each sand particle is assumed to be surrounded by a thin layer of mud. The critical Shields parameter and bed-load sediment transport rate are modified to include the cohesive force acting on the sand particle. The proposed calculation is incorporated into a two-way coupled fluid-structure-sediment interaction model, and applied to wave-induced topographic change of artificial shallows. Numerical results show that an increase in the content ratio of the mud, cohesive resistance force per unit surface area and water content cause increases in the critical Shields parameter and decreases in the bed-load sediment transport rate, reducing the topographic change of the shallow without changing its trend. This suggests that mixing mud in the pores of the sand particles can reduce the topographic change of shallows.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.435-435
• /
• 2016

기후변화에 따라 강우 패턴이 변화하며, 집중호우 발생 빈도의 증가가 예상된다. 이로 인해 저수지 상류에서 유실된 토사는 저수지로 유입하여 정수 처리비용 증가, 1차생산성 감소, 어류폐사, 하천경관 악화 등 다양한 문제를 유발한다. 따라서 위와 같은 탁수 피해 저감을 위해 과학적인 모니터링과 예측, 저수지 운영과 관리기술 개발 등의 대응이 요구된다. 본 연구에서는 극한 탁수사상 발생시 대응 기술의 일환으로 저수지 탁수예측 모델의 신뢰도 향상을 위해, 기존 탁수예측 모형인 CE-QUAL-W2(이하 W2)의 탁수 예측 알고리즘을 개선하고 소양강댐 저수지에 적용하여 그 성능을 평가하였다. 최근 W2모델 3.72 버전까지 출시되었으나, 모델은 단순 침강속도만 고려하여 저수지 밀도 특성을 반영하지 못하고, TSS 모의시 독립침강을 가정하여 응집 침강 및 장기탁수 예측에 취약한 한계점을 가지고 있다. 따라서, 과거 연구내용을 바탕으로 수온에 따른 점성계수 변화(Stoke's), 다중 부유 입자별 침강속도 고려 기능을 추가하였으며, 새롭게 점착성유사의 응집 침강을 고려할 수 있는 기능을 추가하여 모델을 개선하였다. 모델에 점착성 유사 모의 전략은 입자 크기 $63{\mu}m$를 기준으로 비점착성유사(NCS)와 점착성유사(CS)로 구분하고, 비점착성유사는 독립침강, 점착성 유사는 응집침강을 가정하였다. 응집 후 중간 입경의 추정은 Gailani et al(1991)의 식을 사용하였으며, 침강속도 계산 공식은 Hwang and Mehta(1989)식을 적용하였다. 수정된 모델은 소양강댐 운영이후 최대 탁수사상이 발생했던 2006년을 대상으로 기존 탁수해석 결과와 수정된 모델의 모의결과를 실측값과 비교 분석 하였다. Stoke's 식 적용시 기존의 모의결과 대비 AME 평균 23%, RMSE 평균 18%가 개선되는 것으로 나타났으며, Hwang and Metha식 적용시에 SS 모의값이 전반적으로 과소평가되는 것으로 나타났다. 또한, 실측 방류 탁수 농도와 모의값을 비교하여 평가 하였으며, 모의기간인 Julian Day 173~365(192일) 동안 모의 결과의 총 TSS 부하량은 실측값의 약 80%수준을 보였으며, TSS 방류 부하기준 Stoke's 식 적용시 기존 모의대비 오차가 1.3% 개선되는 것으로 나타났다.