• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.3
• /
• pp.125-132
• /
• 2003

The joint method and characteristics of MC nylon and metal are analyzed. Considering the productivity and economics, two materials are joined with the process of turning, knurling, and induction heating. The joint strength is determined by adhesion of the melted nylon, the size of knurl, and the interference from the difference of the diameters. The adhesion strength of the melted nylon is measured. The effects of the knurl size and diameter difference are analyzed with the statistical methods. Finally the joint strength is analyzed in the environments of low, room, and high temperature. Based on this study, the nylon/metal material is expected to be widely used as the sliding machine elements with good lubrication and strength properties.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.11a
• /
• pp.226-227
• /
• 2019

Installation and usage methods are currently different between China and Korea for the same rubber asphalt waterproofing sealant. Quality verification is not properly carried out in this situation, so it is necessary to secure reliability in order to export domestic materials to China. In this study, rubber asphalt waterproofing sealant used as injection-type leakage repair material was tested in accordance to adhesion strength quality test method outlined in the JC/T2428 Chinese Industrial Standard to confirm the basic performance is compliant or not.

• Elastomers and Composites
• /
• v.3 no.1
• /
• pp.62-74
• /
• 1968

천연(天然)고무 및 합성(合成) 고(高) cis 1 : 4 polyisoprene, 대표적(代表的)으로 'Natsyn 400'의 가공(加工), 배합(配合) 또는 가황체(加黃體)의 성질(性質)들의 차이점(差異點)들에 대(對)하여 설명(說明)하였다. 합성중합체(合成重合體)는 미리 소연(素鍊)함이 없이 충전제(充塡劑)를 첨가(添加)함으로서 가공(加工)이 용역(容易)하였으며 CV형(形) 천연(天然)고무에 있어서도 이점(利點)이 나타났다. 천연(天然)고무 배합물(配合物)은 점착성(粘着性)이 좋으며, 특(特)히 미가황물(未加黃物)의 강도(强度)가 현저(顯著)하게 우수(優秀)하다. 가황과정(加黃過程) 및 몇몇가황체(加黃體)의 성질(性質)에 있어서의 차이(差異)는 비(非)고무질(質)을 함유(含有)하지 않는 Natsyn으로 나타난다. 기타(其他)의 가황체성질(加黃體性質)의 차이(差異)는 천연(天然)고무에 있어서 그 가황체(加黃體)가 인장시(引張時)에 결정(結晶)하는 경향(傾向)을 크게 나타내고 있고 특(特)히 고온(高溫)에서 이들 차이(差異)가 현저(顯著)하다.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.10 no.3
• /
• pp.91-100
• /
• 2010

In this paper a sensitivity analysis about effects of influencing factors on the stability of soil cut and embankment slopes in field was performed. Slope stability analysis of slopes in field was carried out with dry, rainy and seismic conditions. As results of analyzing the sensitivity of factors for the dry and rainy conditions, effect of cohesion, internal friction angle and unit weight of soil on the stability of cut slope is more critical in the dry condition than in the rainy condition. However, their effects on the stability of embankment slope for both conditions are similar to each other. The horizontal seismic coefficient does also affect the stability within the similar range of values irrespective of dry or rainy conditions. Cohesion and internal friction angle are more dominant factors influencing the slope stability irrespective of dry or rainy conditions than unit weight of soil and the horizontal seismic coefficient.

• Journal of Adhesion and Interface
• /
• v.18 no.3
• /
• pp.134-140
• /
• 2017

In this study, we made UV cured acrylic pressure sensitive adhesive containing silicone-urethane-acrylate (SUA) oligomer for a coating on protective film and investigated the effect of SUA oligomer content and UV-dose on adhesion properties. The results illustrated that peel strength decreases with increasing oligomer content and UV-dose, while holding power increases. The gel fractions sharply increased after UV irradiation and then remain constant with prolonged UV exposure. From peel-off test, sample S70 (70% oligomer content) shows the best peelability and removability without remaining any mark or adhesive material on the test substrate than S50 (50% oligomer content) and S60 (60% oligomer content). Sample S70 also showed a surface energy lower than $26mJ/m^2$ and a transmittance higher than 95% at UV-dose 1857 and $2270mJ/cm^2$ which met the required properties for protective film application.

• Journal of the Korean GEO-environmental Society
• /
• v.10 no.7
• /
• pp.167-177
• /
• 2009

This study investigates a failure mechanism of a tunnel shotcrete lining with respect to a concentrated load due to blocky rock mass. First of all, it is carried out to survey relevant researches to shotcrete failures by literature reviews and to numerically re-investigate the failure modes of shotcrete lining given by previous researches. Through this study, the failure modes are relocated with the conditions which induce each failure mode newly proposed by this study. In addition to this, the arching shape of tunnel lining, which has not been considered in the previous research despite of inherent geometrical characteristics in tunnels, is taken into consideration in numerical investigation on lining failure in this study. As a result, it is shown that more simplified failure modes can be found on the tunnel boundary condition and the corresponding failure condition to each mode can be different from ones of the previous study due to a tunnel arching effect.

• Tunnel and Underground Space
• /
• v.24 no.1
• /
• pp.81-88
• /
• 2014

In the course of performing the stability analysis of rock structures, there are times when the strength of the Hoek-Brown rock mass needs to be understood in terms of the internal friction angle and cohesion. In this case, the original Hoek-Brown criteion, giving the relationship between ${\sigma}_1$ and ${\sigma}_3$ at failure, have to be transformed to the corresponding Mohr envelope. A new approach to derive the Mohr envelope of the Hoek-Brown criterion is suggested in this study. The new method is based on the Londe's transformation making the stress components dimensionless. The correctness of the derivation leading to the new ${\tau}-{\sigma}$ relationship is confirmed by comparing the calculation results with the Bray's solution through a verification example.

• Journal of the Korean Geotechnical Society
• /
• v.21 no.5
• /
• pp.75-82
• /
• 2005

Shear strength parameters obtained from field tests are important factors in the analysis of slope stability. In this paper, sensitivity analysis was performed to evaluate the effect of input parameters on the analysis of slope stability. The input parameters selected for sensitivity analysis were slope angle, cohesion, and friction angle. Monte-Carlo Simulation method was to estimate input parameters for sensitivity analysis in slope stability, and the limit equilibrium method was used to calculate the factor of safety of slope stability. A rock slope, failed in the field, was used for the sensitivity analysis of input parameters in the analysis of slope stability. The result of analysis shows that the factor of safety of the rock slope was a little low. From partial correlation coefficient (PCC) of input parameters from the sensitivity analysis, slope stability was dependant mainly on cohesion and slope angle. The effect of friction angle was smaller than those of cohesion and slope angle on slope stability.

• Water for future
• /
• v.27 no.3
• /
• pp.115-121
• /
• 1994

Cohesie sediment movement in estuarine systems is strongly affected by the phenomena of aggregation and flocculation. Aggregation is the process where primary particles are clustered together in tightly-packed formations; flocculation is the process where aggregates and single particles are bonded together to form large particle groups of very low specific density. The size, shape and strength of the flocculants control the rate of deposition and the processes of pollutant exchange between suspended sediments and ambient water. In estuarine waters, suspended sediments above the lutocline form the mobile suspension zone while below the lutocline they form the stationary suspension zone. Suspended particles in the mobile zone are generally in a dispersed state and the controlling forces are the Brownian motion and the turbulent flow fluctuations. In the stationary suspension zone, the driving force is the gravity. This paper discusses the settling and particle flocculation characteristics under quiescient flow conditions. Particles are entering the study domain randomly. Particles in the mobile suspension zone are simulated by using the Smoluchowski's model. Flocs created in the mobil suspension zone are moving into the stationary suspension zone where viscosity and drag effects are important. Utilizing the concepts of the maximum Feret's diameter and the Minkowski's sausage logic, the fractal dimension of the flocs within the stationary suspension is estimated and then compared with results obtained by other studies.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.391-391
• /
• 2016

유수동역학적인 요소와 유사의 부유는 서로 상호작용을 주고받으며 다양한 현상을 만들어낸다. 많은 선행연구를 통해 유사 농도 등의 특성이 난류 구조 등의 변화를 야기하며, 변화한 난류 구조 역시 유사의 부유 등에 2차적인 영향을 준다는 점이 확인되었다. 본 연구에서는 가는 유사에 보다 집중하여 유사 부유와 이에 따른 연직구조 특성의 변화를 살펴본다. 본 연구에서는 1차원 연직 모형을 이용하여 수치실험을 수행한다. 본 연구에 이용된 모형은 가는 유사의 특성인 빠른 입자 반응 시간(Particle Response Time)이 가정되는 모형으로 선행연구를 통해 적용성이 검증된 것으로 판단한다. 주요 분석대상은 유사의 농도와 속도경사 간의 관계 등이며, 분석하는 유사 농도 종류는 일반적인 비점착성 유사의 경우에 관심을 가지는 질량 농도에 집중하여 결정된다. 수치실험 수행을 위해서는 정류 흐름, 진동파 흐름 등이 적용되었고 다양한 경우의 가는 유사를 고려하기 위한 실험조건의 변경이 이루어졌다. 수치실험 결과 진동파의 다양한 위상에서 조금씩 달라지는 연직구조가 확인되었다. 이는 보정되는 Schmidt 수의 값과도 연관관계를 가지는 것으로 나타났다. 특히 가는 유사의 경우에도 입자의 크기에 따라 다른 연직구조의 특성이 모의되었으며 이를 통해 수치실험의 경우에도 입자 크기의 고려 하에 매개변수의 보정이 이루어져야 한다는 점을 알 수 있다. 스토크스 수는 입자 반응 시간과 유체 난류 시간규모(Fluid Turbulence Ttime Scale)의 비율을 의미한다. 본 연구를 통해 스토크스 수가 유사의 확산강도 결정과 큰 상관 관계를 가지는 것을 알 수 있다. 이때 유사의 크기와 보정되는 Schmidt 수의 값은 고정되었다. 수치 계산시에 확산계수의 값이 부유 및 이에 따른 연직구조의 특성을 결정하는 중요한 변수라는 점을 고려할 때, 가는 유사의 부유를 모의할 때에는 세심한 주의가 요구된다는 점을 이해할 수 있다. 선행 연구사례를 통해 볼 때 부유하는 입자의 관성력이 Schmidt 수의 결정과 이에 따른 연직 구조의 계산에 큰 영향을 준다는 점을 알 수 있다. 본 연구에서는 스토크스 수를 관성력을 나타낼 수 있는 지표로서 계산하였지만 보다 정량적이고 효율적인 입자 관성력 지표가 제시될 때 효율적인 연구결과의 제시가 이루어질 수 있을 것으로 기대한다.