• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2011.06a
• /
• pp.263-265
• /
• 2011

우리나라 해역에서 선박의 대형화, 고속화와 선박교통량의 증가 및 항만과 해양개발 등으로 해상교통 환경은 급속하게 변화하고 있으며, 항로의 좌 우 측방 한계 표시, 항행위해요소의 표시 등의 용도로 사용되는 부표류는 항만, 연안해역 및 내륙수로에서 통항 선박의 안전을 위하여 그 수요가 점진적으로 늘어나고 있다. 변화하는 해양교통 환경에 능동적으로 대처하고 부표관리 업무의 효율성을 증대하기 위하여 경량화, 내부식성, 저비용 등 장점으로 정온도가 유지되는 항내나 내륙수로 등에서 국제적으로 항로표지용 부표로 이용되고 있는 플라스틱 부표의 국외 개발 동향, 제조 방법 및 시제품의 특성 평가를 통한 기술 향상 방안에 대하여 기술하였다.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2012.05a
• /
• pp.104.2-104.2
• /
• 2012

이종 재료의 접합에 대한 연구는 단일 재료에서 얻을 수 없는 물리적/기계적 특성과 이종 재료의 우수한 특성을 얻을 수 있다는 장점이 있어 국내외 적으로 연구가 활발히 진행되고 있다. 이러한 이종 접합 기술은 구조재료와 에너지 변환분야에 가장 많이 사용되고 있으며, 그 외 광촉매와 Thin film, 경량구조재료 등에도 사용되고 있다. 그 중 FGM(Functional Graded Materials)는 조성의 점진적인 변화를 통하여 접합하는 방법으로 이종 재료 접합 시 발생하는 내부 응력을 해소해줌으로써 적합한 방법이라고 할 수 있다. FGM 제작에 사용되는 방법으로 널리 알려진 것들로는 plasma spraying, 원심주조, 분말 야금법, PVD, CVD 그리고 EPD(electrophoretic deposition) 등이 있다. 이중에서 EPD는 수용액이나 유기용매와 같은 분산매체 중에 콜로이드 입자의 표면에 대전되는 전하를 이용하여, 외부에서 전장을 걸어서 입자의 움직임을 제어하는 기술이다 EPD는 코팅 속도가 상대적으로 빠르고 두꺼운 코팅 층 제작이 가능하다. 또한 바인더, 윤활제 또는 가소제를 사용하지 않고 다양한 종류와 모양의 기판 위에 균일한 코팅이 가능하다는 장점이 있다. 본 연구에서는 Ni substrate를 이용하여 그 위에 Ni과 $Al_2O_3$의 조성을 점진적으로 변화시켜 FGM을 EPD 방법으로 코팅하였다. 여기서 사용된 Ni은 높은 녹는점과 좋은 연성으로 인해 성형이 용이하여 구조재료로 적합하며, $Al_2O_3$는 고내열성과 내부식성을 가지며 경도가 높다는 장점이 있다. 본 연구에서는 EPD 방식을 이용하여 Ni/$Al_2O_3$ FGM을 코팅하였으며, 코팅 후 발생하는 substrate와의 접착력 문제를 해결하기 위해서 건조 방식과 substrate의 표면 상태를 최적화하여 다층의 Ni/$Al_2O_3$ FGM을 코팅 및 소결하였다. Zeta-potential 측정을 통해 electrophoretic mobility와 suspension의 분산 안정도를 평가 할 수 있었으며, X-ray 회절 분석(XRD)을 통하여 Ni 의 환원 여부를 확인하였다. 또한 Scanning electron microscopy(SEM) 분석을 통하여 미세구조 분석을 하였고, 최종적으로 Electron Probe Micro Analyzer (EPMA) 를 이용하여 다층 구조의 조성변화를 확인함으로 Ni/$Al_2O_3$의 FGM 코팅이 이루어졌음을 확인하였다.

• Transactions of Materials Processing
• /
• v.28 no.6
• /
• pp.328-335
• /
• 2019

Demand for ultra-thin materials is increasing due to their light-weight and versatile properties. In this work, the formability of the ultra-thin stainless steel sheets of various thicknesses in the incremental sheet forming (ISF) process is investigated. The effects of the thickness on formability were evaluated with forming experiments of the truncated cone shape with 10° intervals. As the thickness of the material decreased, the maximum forming angle decreased and wrinkles also occurred quickly. The maximum forming angles in the truncated cone shape without the wrinkles for the thickness of 0.05 mm, 0.08 mm, and 0.1mm were 30°, 40°, and 50°, respectively. Wrinkles occurred in a twisted shape along the moving direction of the tool. As the material thickness increased, the size of the wrinkles increased.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.812-815
• /
• 2005

The incremental forming process employs several tens or hundreds of continuous local strokes, so the entire process is difficult to analyze due to much computation time and large computer memory. The objective of this work is to propose a new numerical scheme of the finite element method, automatic expansion of domain (AED), and to reduce computation time and computer memory. In the AED scheme, an effective analysis domain in each local forming step is defined and then the domain is automatically expanded in accordance with the repeated process. In order to verify the validity of the criterion for the AED scheme and the applicability of the AED scheme, two-dimensional incremental plane-strain forging process is first analyzed using the proposed scheme with various criteria and full domain. In addition, three-dimensional incremental radial forging process is analyzed to verify the applicability of the proposed scheme to a practical incremental forging process.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.7
• /
• pp.1685-1696
• /
• 1994

In this paper, a new forming process of the large-size forgings within the limit of forming loads is developed by introducing the incremental forging method and combined forming method. For the development of the forming process, various related processes are proposed and modelling experiments of plasticine and corresponding numerical simulation ate carried out. Thus, an optimal process considering the productivity and economical efficiency is recommended from the study of formability and forming loads, etc. The selected process is subjected to a modelling experiment of lead and 1/7 scale prototype experiment of the real material so as to verify the effectiveness of a selected process as well as to determine the design parameters. The developed process is then applied the forging product of dome shape. Dome-shaped forgings can be produced by the developed process within the limit loads and with the simple tools.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.1 no.2
• /
• pp.21-26
• /
• 2000

Flow forming is a chipless metal forming method for axi-symmetric parts, which is more economical. efficient and versatile method of producing parts than the other sheet metal forming process such as stamping or deep drawing. In this study, flow forming process with 1-Roller is applied to produce auto-transmission parts of automobiles which have been produced by Press drawing process so far. It can be known that flow forming process is applicable to the flexible manufacturing system due to the low cost for the establishment and it can be combined with press forming process to promote productivity and to improve the accuracy of products.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2006.05a
• /
• pp.353-358
• /
• 2006

A three-dimensional finite element approach to process analysis and design for joining the socket with the ball by a kind of the rotary forging processes is presented in this paper. The rigid-plastic finite element method is employed and its results are used to reduce the number of process design tryouts. The approach is applied to developing a concave piston assembly for a high pressure hydraulic pump. Experiments show that the developed piston assembly satisfies the quality requirement on geometrical tolerance.

• Transactions of Materials Processing
• /
• v.20 no.4
• /
• pp.279-283
• /
• 2011

Recently incremental sheet metal forming (ISF) has used widely in making prototypes and small-volume products in automotive industry etc. We apply the ISF to make a 1/4 sized automobile body-in-white. First, ISF tests for rectangular shaped cup have been performed to clarify the formability denoting the relationship between the component wall angle and maximum cup height of safe forming. Next, a CAD model for the automobile was designed and segmented into several components in order to accommodate the working space of the CNC machine we adopted and the formability of the sheet metal. Then, a CAM software was employed to generate the tool path for manufacturing wooden dies and all the small parts. Finally, the different parts were joined into a single component by laser welding after the ISF process. By using the ISF we successfully produced the 1/4 sized automobile body-in-white.

• The KIPS Transactions:PartD
• /
• v.8D no.5
• /
• pp.573-580
• /
• 2001

The large amounts of high dimensional data contains a significant amount of noises by it own sparsity, which adds difficulties in high dimensional clustering. The CLIP is developed as a clustering algorithm to support characteristics of the high dimensional data. The CLIP is based on the incremental one dimensional projection on each axis and find product sets of the dimensional clusters. These product sets contain not only all high dimensional clusters but also they may contain noises. In this paper, we propose extended CLIP algorithm which refines the product sets that contain cluster. We remove high dimensional noises by applying two dimensional projections iteratively on the already found product sets by CLIP. To evaluate the performance of extended algorithm, we demonstrate its effectiveness through a series of experiments on synthetic data sets.

• Transactions of Materials Processing
• /
• v.3 no.1
• /
• pp.110-119
• /
• 1994

In this paper, a new forming process of large-size forgings of converged nozzle-shape is developed by the experimental study using the incremental forging method and combined forming method. The development of the forming process is focused on the manufacturing of large-size forgings by the press with medium load capacity. Various related processes are proposed and modelling experiments using plasticine are carried out. Thus, the incremental forging method for expanding is recommanded from the study of formability and forming load, etc. The selected process is then subjected to modelling experiments of lead and the design parameters such as preform for final process, die-width of the upper die and reduction amount of each stroke are determined. In order to verify the effectiveness of the selected process, 1/7 scale prototype experiment of the real material is carried out. Forgings of converged nozzle shape can be produced by the developed process within the limit loads and with the simple tools.