• 제목/요약/키워드: 점도쐐기

검색결과 3건 처리시간 0.019초

높은 미끄럼 비의 점 접촉 EHL 하에서 발생하는 딤플 영역의 온도 분포와 유막 두께 분포의 측정 (Measurements of Film Thickness and Temperature Distribution in Dimple Zone Developed in EHL Point Contact at High Slip Ratios)

  • 김성기;;;;김경웅
    • 대한기계학회논문집A
    • /
    • 제27권4호
    • /
    • pp.479-484
    • /
    • 2003
  • In this paper, film thickness and temperature distribution are measured in EHL point contact at high slip ratios. Infrared temperature mapping with two band pass fillers. proposed by Ausherman (1976). is used to measure temperature distribution. And the optical interferornetric method with two filters (red and green filters) is used to measure film thickness. Result of experiment showed that temperature rising at film and ball surface occurred very dramatically in Dimple zone. As slip velocity, slip ratio and load increased, size of Dimple and temperature rising became more large In addition, Position and shape of Dimple we changed by slip ratios, and increasing of Dimple size decreased traction coefficient. In short, it is appointed that the Dimple phenomenon be developed by the effect of viscosity wedge.

높은 구름/미끄럼 비를 갖는 점 접촉 EHL 하에서의 온도분포와 유막 두께 분포의 측정 (Measurements of film thickness and temperature distribution in EHL point contact at high roll/slip ratios)

  • 김성기;팔목화행;중원강광;경극계사;김경웅
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2001년도 춘계학술대회논문집C
    • /
    • pp.293-298
    • /
    • 2001
  • In this paper, film thickness and temperature distribution are measured in EHL point contact at high roll/slip ratios. Infrared temperature mapping with two band pass filters, proposed by Ausherman (1976), is used to measure temperature distribution. And the optical interferometric method with two filters (red and green filters) is used to measure film thickness. Result of experiment showed that temperature rising at film and ball surface occurred very dramatically in Dimple zone. As slip velocity, roll/slip ratio and load increased, size of Dimple and temperature rising became more large. In addition, position and shape of Dimple were changed by roll/slip ratios, and increasing of Dimple size decreased traction coefficient. In short, it is appointed that the Dimple phenomenon be developed by the effect of viscosity wedge.

  • PDF

한국(韓國)의 보리해충(害虫)에 관(關)한 연구(硏究) (Studies on the Insect Pests of Barley in Korea)

  • 권용정;안승락
    • Current Research on Agriculture and Life Sciences
    • /
    • 제3권
    • /
    • pp.129-150
    • /
    • 1985
  • 본(本) 조사(調査)는 보리해충의 종합관리체계수립(綜合管理體系樹立)에 필요(必要)한 기초정보(基礎情報)를 제공(提供)하기 위하여 잠재해충을 포함(包含)한 전(全) 해충목록작성 및 주요경계해충의 개체군동태(個體群動態) 파악(把握)과 각(各) 지역(地域) 및 보리품종(品種)에 따른 발생변동요인(發生變動要因)을 조사(調査)코자 하였다. 지금까지 밝혀진 보리해충은 모두 32과(科) 77속(屬) 94종(種)이며 그중 20종(種)이 새로 추가(追加)된다. 우점도(優占度)로 본 주요경계해충은 애멸구, 보리수염진딧물, 기장테두리진딧물, 옥수수테두리진딧물, 알락매미충, 보리굴파리, 벼줄기굴파리, 아시아잎벌레, 밀잎벌레, 알락수염노린재등(等)의 순(順)으로 나타났다. 보리품종별(品種別) 주요해충의 밀도(密度)는 팔달보리에서 가장 높았고 밀양 22호(號)가 가장 낮았다. 애멸구, 알락매미충, 알락수염노린재, 아시아잎벌레, 밀잎벌레는 6월상순(月上旬), 벼줄기굴파리, 보리굴파리는 5월중순(月中旬), 진딧물류(類)는 5월하순(月下旬)에 각각(各各) 가장 높은 발생율(發生率)을 보였다. 천적(天敵)으로서는 긴날개쐐기노린재가 21.4 %로 가장 많았고 다음은 꼬마남생이무당벌레로 9.6%였다. 일반적(一般的)으로 주요경계해충이 보리수확기(收穫期)인 5월하순(月下旬)에서 6월상순(月上旬)에 걸쳐 급격(急激)히 증가(增加)하는 것으로 나타났으므로 수확량(收穫量)에 별 다른 영향(影響)을 미치지 않는 한 조생종(早生種)을 육종(育種) 보급(普及)하는 것이 바람직하며 동시(同時)에 이모작(二毛作) 지역(地域)의 조식재배(早植栽培)를 유도(誘導)할 수 있을 것이다. 또한, 밀양22호품종(號品種)에 대(對)한 해충의 저밀도(低密度) 요인(要因)이 화학적(化學的), 물리적(物理的) 또는 생태적(生態的) 저항성(抵抗性)에 기인(起因)하는지 그 여부(與否)를 규명(糾明)하여 장차(將次) 육종연구(育種硏究)에 도입(導入)하는 것이 필요(必要)하다고 사료(思料)된다. 또한 경제적(經濟的) 해충관리를 위해서 보리후작(後作) 작물(作物)인 콩등(等) 전작물(田作物)과 벼로 이동(移動)하는 애멸구, 진딧물류(類), 노린재류(類), 인시류등(鱗翅類等)을 보리밭에서 1차(次) 방제(防除)를 하여 그 밀도(密度)를 저하(低下)시키는 방안(方案)과 각(各) 해충의 경제적(經濟的) 피해수준(被害水準)을 설정(設定)하는 것이 바람직하다고 사료(思料)된다.

  • PDF