• FLOWER RESEARCH JOURNAL
• /
• v.19 no.4
• /
• pp.255-258
• /
• 2011

A new gerbera cultivar 'Paspin' was released by the National Institute of Horticultural & Herbal Science (NIHHS) in 2009. A cross was made between 'Lilabella' and 'Mephisto' with purple and semi-double in 2005. After investigation of the characteristics for five years (from 2005 to 2009), it was selected specially as a cut flower. The 'Paspin' cultivar has a pastel pink flower color (RHS R52B) with green disc center and semi-double flower. It has large-sized flowers which average flower diameter is about 12.8 cm. And inner ray floret and disc diameters are 7.87 cm and 2.57 cm, respectively. It has an adequate peduncle height of 48.6 cm, and a longer vase life of 10.8 days. It is vigorous in growth and also adaptable to the local cultural environments of Korea. It is expected that if the 'Paspin' cultivar will be planted, the royalty fees to be paid to other countries can be saved. And the local growers will also be benefitted since the cost of cultivars will be lower than the imported ones.

• Journal of Gastric Cancer
• /
• v.5 no.4 s.20
• /
• pp.288-294
• /
• 2005

Purpose: Superficially spreading (SS) early gastric cancer (EGC) is characterized by wide horizontal extension without deep vertical invasion. It is a relatively rare form of EGC, and it's clinicopathological (C-P) characteristics are not evident. This study aimed to clarify their C-P characteristics. Materials and Methods: We defined SS EGC as invading less than the submucosal layer that measured more than 60 mm in diameter or wider than $5{\times}5cm \;(25cm^2)$ in width. The C-P characteristics and prognosis were compared between 69 patients with SS EGC and 319 patients with the common type EGC (EGC except SS type). Results: For SS EGC lymph node metastases, Lauren's diffuse type, lymphatic invasion were significantly higher than in common type EGC. In patients with SS EGC, all of the metastatic lymph nodes were anatomically distributed within the paragastric region, with fewer along the left gastric artery and common hepatic artery. In 6 cases of SS EGC with resection marqins less than 10 mm, there was no death during the follow-up period (4 to 13 years after operation) if margins were not involved. Age (>58 yrs), tumor site (upper 1/3), lymph node metastasis, submucosal invasion were statistically significant poor prognostic factor in univariate survival analysis. In multivariate survival analysis, age and lymph node metastasis were independent prognostic factors. However, tumor diameter or width was not a significant prognostic factor. Conclusion: Although SS EGC has histologically distinct properties, gastrectomy with free surgical margins and appropriate lymph node dissection $(D1+{\beta})$ could be a suitable treatment.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.19 no.12
• /
• pp.1338-1346
• /
• 2009

We present a one-dimensional annular plate element with which the in-plane vibration of full disks can be analyzed efficiently and accurately by using the FEM. Its elementary mass matrix and stiffness matrix are derived, respectively, from the virtual work by effective forces and the virtual strain energy. The static deformation modes obtained from an integration of the differential equilibrium equations of the annular plate are used as interpolation functions of the one-dimensional annular plate element. The in-plane natural vibration characteristics of a 2-step full disk and a uniform full disk are analysed. Its results are compared with the results obtained by utilizing two-dimensional 8-node quadrilateral plane elements and cyclic symmetry of the disk. And also, by comparing with the theoretical results of previous researchers, the efficiency and accuracy of the presented element are verified.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.19 no.2
• /
• pp.208-216
• /
• 2009

In this paper, we present the equations of motion by which the natural vibration of a rotating annular disk can be analyzed accurately. These equations are derived from the theory of finite deformation and the principle of virtual work. The radial displacements of annular disk at the steady state where the disk is rotating at a constant angular velocity are determined by non-linear static equations formulated with 1-dimensional finite elements in radial direction. The linearlized equations of the in-plane vibrations at the disturbed state are also formulated with 1-dimensional finite elements in radial direction along the number of nodal diameters. They are expressed as in functions of the radial displacements at the steady state and the disturbed displacements about the steady state. In-plane static deformation modes of an annular disk are used as the displacement functions for the interpolation functions of the 1-dimensional finite elements. The natural vibrations of an annular disk with different boundary conditions are analyzed by using the presented model and the 3-dimensional finite element model to verify accuracy of the presented equations of motion. Its results are compared and discussed.

• The korean journal of orthodontics
• /
• v.24 no.3 s.46
• /
• pp.569-586
• /
• 1994

The purpose of this study is to investigate the effect of loss of incisal function on the thickness, growth activities, ultrastructure of the condylar cartilage and on the muscle fibers of masseter superlicialis, anterior belly of digastric muscle in the growing rats. 37 day-old-rats of which incisors had been trimmed every day received soft diet from weaning and were studied by the autoradiography, electron microscopy and muscle histochemistry. The results obtained were as follows : The thickness of the fibrous, proliferative layer in superior, posterosuperior portion of the condylar cartilage was significantly(p<0.01) reduced in experimental groups and the decrease rate of fibrous layer thickness was greater in posterosuperior portion than in superior portion of cartilage and was greater than in proliferative layer. In normal group, more cells of posterosuperior portion moved more rapidly towards the medullary cavity. In experimental group, the labelling index of posterosuperior portion was decreased in proliferative layer at 2 hours, in transitional layer at 1, 2 days, in hypertrophic layer at 4 days after injection relative to posterosuperior portion of control group. But labelling index of superior portion was not different from that of control group at all time course after injection. From the muscle histochemistry, the diameter of type IIB fibers in masseter superficialis muscle, type IIA, type IIB fibers in anterior belly of digastric muscle decreased significantly(p<0.01) relative to controls in experimental group. From electron microscopic study, in the fibrous layer of the posterosuperior portion of condylar cartilage in normal group, many fibroblast like cells near the joint cavity showed extensive remodelling activities in ultrastructure. There was no morphological changes between experimental and control group in all cartilage cell layers of superior portion but cells near the joint cavity in fibrous layer of posterosuperior portion of experimental group showed morphologically inactive state relative to control group.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.83-83
• /
• 2017

국내에 유통되는 제초날은 대부분 금속으로 제작되며, 금속 날의 대부분 탄소공구강(SK-3~5)으로 제작되고, 날 수 및 날 형태에 따라 2도 날, 3도 날, 4도 날, 8도 날, 톱날로 구분된다. 대부분 평지 제초작업에 사용되고, 고랑 제초 작업에 알맞은 제초날의 없어 고랑 제초 작업의 효율이 떨어진다. 본 연구는 굴곡이 있는 밭의 고랑 제초 작업에 효율적인 원형 제초날을 설계 하고자 한다. 밭작물의 제초작업은 굴곡이 있는 이랑과 고랑 사이의 잡초를 제거해야 하기 때문에 평지의 잡초를 제거하는 제초날로는 제초작업이 거의 불가능하다. 따라서 고랑 형상에 맞는 원형 제초날을 설계 하였으며, 회전 균형 및 무게의 균일성 설계가 쉬운 뼈대형 원형 제초날을 설계한 후 데이터를 이용하여 원형 제초날을 설계하였다. 또한 고랑의 잡초 뿌리부분을 제거하기 위해 원형 제초날에 돌출부를 추가하는 방법으로 설계하였다. 제초날은 밭작물 고랑폭을 기준으로 하여 높이는 85mm 직경은 300mm로 설계하였으며, 제초날 설계시 원형 제초날은 뼈대형 원형 제초날과 같이 고랑폭을 기준으로 하여 높이 및 직경을 뼈대형 원형 제초날과 동일한 치수로 설계하였다. 원형 제초날 설계에서 돌출부를 볼트 결착방식으로 설계하였으며, 회전중 돌출부의 파손 혹은 이탈을 방지하기 위하여 직경 5mm이상의 볼트 결착이 필요하였다. 볼트 결착방식은 제초날 조립후 제초날 회전시 고랑의 잡초를 효과적으로 제거하기 위한 작업공간 확보가 어려울 것으로 판단되었다. 따라서 제초날 원형부에 돌출부를 절단 절곡하는 방식으로 돌출부를 재설계하였으며, 돌출부 길이는 안쪽 부분 15mm, 바깥 부분 20mm로 설계하고, 돌출부 회전반경은 안쪽 날 20mm, 바깥 날 10mm로 설계하였다. 일반적인 제초날 과 달리 원형 제초날을 개발하기 위해서 회전균형과 안전이 제초날 설계에 중요한 요인이 된다. 뼈대형 제초날을 통하여 제초날의 균형 데이터를 분석하였고 이를 바탕으로 원형 제초날을 설계하였다. 또한 발란싱 머신을 이용한 회전시험에서 unbalance 정도가 3,600rpm에서 4.51/47.1deg로 나타나 제초기에 적용 가능할 것으로 판단되었다.

• Horticultural Science & Technology
• /
• v.31 no.4
• /
• pp.517-521
• /
• 2013

A new cultivar Dendranthema grandiflourm 'Dream Round' was developed at Gyeonggi-do Agricultural Research & Extension Services (GARES), Korea in 2010. The variety 'Dream Round' was initially derived from a cross in 2006 between 'Hebo' a seed parent, a spray chrysanthemum cultivar with white anemone type, and 'Samos' as a pollen parent, a spray chrysanthemum variety with white anemone type. The cultivar has anemone type with white petals. Trial evaluation was conducted from 2008 to 2010 for the selection of that cultivar, including a shading culture in spring and a retarding culture in summer. The flowering time of 'Dream Round' was October 24th, and year-round flowering was possible by shading or lighting treatment. The diameter of flower of 'Dream Round' was 34.1 mm. Numbers of flowers per stem and petals per flower of 'Dream Round' were 12.8 and 26.1, respectively. Its leaf color was green (Green Group 147A) and plant height was 92.4 cm. Days to flowering of 'Dream Round' under the short day treatment was about 54 in spring, and diameter of flower of 'Dream Round' was 34.2 mm in the summer. The vase life of 'Dream Round' was 21.7 days in autumn.

• Journal of the Korean Society for Railway
• /
• v.15 no.6
• /
• pp.588-596
• /
• 2012

This paper presents a new semi-analytical annular Mindlin plate element with which out-of-plane natural vibration of thick disks can be analyzed simply, efficiently, and accurately through FEM by including effects of rotary inertia and transverse shear deformation. Using static deformation modes which are exact solutions of equilibrium equations of annular Mindlin plate, the element interpolation functions, stiffness and mass matrices corresponding to each number of nodal diameters are derived. The element is capable of representing out-of-plane rigid-body motions exactly and free from shear locking. Natural frequencies of uniform and multi-step disks with or without concentric ring support are analyzed by applying the presented element. Such results are compared with theoretical predictions of previous works or FEA results obtained by using two-dimensional shell element to investigate the convergence and accuracy of the presented element.

• Journal of Soil and Groundwater Environment
• /
• v.10 no.6
• /
• pp.20-31
• /
• 2005

Three dimensional Monte-Carlo simulations of non-ergodic transport of a lion-reactive solute plume by steady-state groundwater flow under a uniform mean velocity in isotropic heterogeneous aquifers were conducted. The log-normally distributed hydraulic conductivity, K(x), is modeled as a random field. Significant efforts are made to reduce tile simulation uncertainties. Ensemble averages of the second spatial moments of the plume and plume centroid variances were simulated with 1600 Monte Carlo runs for three variances of log K, ${\sigma}_Y^2=0.09,\;0.23$, and 0.46, and three dimensionless lengths of line plume sources normal to the mean velocity. The simulated second spatial moment and the plume centroid variance in longitudinal direction fit well to the first order theoretical results while the simulated transverse moments are generally larger than the first order results. The first order theoretical results significantly underestimated the simulated dimensionless transverse moments for the aquifers of large ${\sigma}_Y^2$ and large dimensionless time. The ergodic condition for the second spatial moments is far from reaching in all cases simulated, and transport In transverse directions may reach ergodic condition much slower than that in longitudinal direction. The evolution of the contaminant transported in a heterogeneous aquifer is not affected by the shape of the initial plume but affected mainly by the degree of the heterogeneity and the size of the initial plume.

• Journal of Animal Environmental Science
• /
• v.11 no.3
• /
• pp.153-160
• /
• 2005

This study was conducted to determine the effect of floor type of finishing building and increasing market weight of finishing Pigs on Performance, carcass traits and pork quality. Four hundred and forty-four finishing pigs were confined and administered with different floor type(concrete slat and bedded with sawdust) and increasing market weight(110kg to 130kg) of finishing building. The result obtained from this study were summarized as follows; 1. There was no significant difference between the floor type of finishing building in the body weight gain, feed intake and gain per feed. And also increasing market weight of finishing pigs was not affected the performance of finishing pigs. 2. Increasing market weight of finishing pigs affect the carcass yield. The market weight at 130kg showed more amount of each cut of carcass, especially the belly portion was higher, but backfat thickness was not different. 3. Carcass traits did not show any significant difference due to the difference of market weight of finishing pig and floor type of finishing building. 4. There was no significant difference in the chemical compositions and meat color of pork loin between the floor type of finishing building and increasing market weight of finishing pigs.